Commit 53d02858 authored by Tomeu Vizoso's avatar Tomeu Vizoso Committed by Thierry Reding
Browse files

ARM: tegra: Move generic parts out of the nyan-big DT 



In preparation for adding the DT for the nyan-blaze board.

Signed-off-by: default avatarTomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: default avatarStephen Warren <swarren@nvidia.com>
Reviewed-by: default avatarAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
parent 412e575d

arch/arm/boot/dts/tegra124-nyan-big.dts

+13 −676
Original line number Diff line number Diff line 
/dts-v1/;



#include <dt-bindings/input/input.h>

#include "tegra124.dtsi"

#include "tegra124-nyan.dtsi"



/ {

	model = "Acer Chromebook 13 CB5-311";

	compatible = "google,nyan-big", "nvidia,tegra124";



	aliases {

		rtc0 = "/i2c@0,7000d000/pmic@40";

		rtc1 = "/rtc@0,7000e000";

		serial0 = &uarta;

	};



	memory {

		reg = <0x0 0x80000000 0x0 0x80000000>;

	};



	host1x@0,50000000 {

		hdmi@0,54280000 {

			status = "okay";



			vdd-supply = <&vdd_3v3_hdmi>;

			pll-supply = <&vdd_hdmi_pll>;

			hdmi-supply = <&vdd_5v0_hdmi>;

	panel: panel {

		compatible = "auo,b133xtn01";



			nvidia,ddc-i2c-bus = <&hdmi_ddc>;

			nvidia,hpd-gpio =

				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;

		backlight = <&backlight>;

		ddc-i2c-bus = <&dpaux>;

	};



		sor@0,54540000 {

			status = "okay";



			nvidia,dpaux = <&dpaux>;

			nvidia,panel = <&panel>;

	sdhci@0,700b0400 { /* SD Card on this bus */

		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;

	};



		dpaux@0,545c0000 {

			vdd-supply = <&vdd_3v3_panel>;

			status = "okay";

		};

	sound {

		compatible = "nvidia,tegra-audio-max98090-nyan-big",

			     "nvidia,tegra-audio-max98090-nyan",

			     "nvidia,tegra-audio-max98090";

		nvidia,model = "GoogleNyanBig";

	};



	pinmux@0,70000868 {
@@ -492,648 +473,4 @@ 
			};

		};

	};



	serial@0,70006000 {

		/* Debug connector on the bottom of the board near SD card. */

		status = "okay";

	};



	pwm@0,7000a000 {

		status = "okay";

	};



	i2c@0,7000c000 {

		status = "okay";

		clock-frequency = <100000>;



		acodec: audio-codec@10 {

			compatible = "maxim,max98090";

			reg = <0x10>;

			interrupt-parent = <&gpio>;

			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;

		};



		temperature-sensor@4c {

			compatible = "ti,tmp451";

			reg = <0x4c>;

			interrupt-parent = <&gpio>;

			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;



			#thermal-sensor-cells = <1>;

		};

	};



	i2c@0,7000c400 {

		status = "okay";

		clock-frequency = <100000>;

	};



	i2c@0,7000c500 {

		status = "okay";

		clock-frequency = <400000>;



		tpm@20 {

			compatible = "infineon,slb9645tt";

			reg = <0x20>;

		};

	};



	hdmi_ddc: i2c@0,7000c700 {

		status = "okay";

		clock-frequency = <100000>;

	};



	i2c@0,7000d000 {

		status = "okay";

		clock-frequency = <400000>;



		pmic: pmic@40 {

			compatible = "ams,as3722";

			reg = <0x40>;

			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;



			ams,system-power-controller;



			#interrupt-cells = <2>;

			interrupt-controller;



			gpio-controller;

			#gpio-cells = <2>;



			pinctrl-names = "default";

			pinctrl-0 = <&as3722_default>;



			as3722_default: pinmux {

				gpio0 {

					pins = "gpio0";

					function = "gpio";

					bias-pull-down;

				};



				gpio1 {

					pins = "gpio1";

					function = "gpio";

					bias-pull-up;

				};



				gpio2_4_7 {

					pins = "gpio2", "gpio4", "gpio7";

					function = "gpio";

					bias-pull-up;

				};



				gpio3_6 {

					pins = "gpio3", "gpio6";

					bias-high-impedance;

};
 


				gpio5 {

					pins = "gpio5";

					function = "clk32k-out";

					bias-pull-down;

				};

			};



			regulators {

				vsup-sd2-supply = <&vdd_5v0_sys>;

				vsup-sd3-supply = <&vdd_5v0_sys>;

				vsup-sd4-supply = <&vdd_5v0_sys>;

				vsup-sd5-supply = <&vdd_5v0_sys>;

				vin-ldo0-supply = <&vdd_1v35_lp0>;

				vin-ldo1-6-supply = <&vdd_3v3_run>;

				vin-ldo2-5-7-supply = <&vddio_1v8>;

				vin-ldo3-4-supply = <&vdd_3v3_sys>;

				vin-ldo9-10-supply = <&vdd_5v0_sys>;

				vin-ldo11-supply = <&vdd_3v3_run>;



				sd0 {

					regulator-name = "+VDD_CPU_AP";

					regulator-min-microvolt = <700000>;

					regulator-max-microvolt = <1350000>;

					regulator-min-microamp = <3500000>;

					regulator-max-microamp = <3500000>;

					regulator-always-on;

					regulator-boot-on;

					ams,ext-control = <2>;

				};



				sd1 {

					regulator-name = "+VDD_CORE";

					regulator-min-microvolt = <700000>;

					regulator-max-microvolt = <1350000>;

					regulator-min-microamp = <2500000>;

					regulator-max-microamp = <4000000>;

					regulator-always-on;

					regulator-boot-on;

					ams,ext-control = <1>;

				};



				vdd_1v35_lp0: sd2 {

					regulator-name = "+1.35V_LP0(sd2)";

					regulator-min-microvolt = <1350000>;

					regulator-max-microvolt = <1350000>;

					regulator-always-on;

					regulator-boot-on;

				};



				sd3 {

					regulator-name = "+1.35V_LP0(sd3)";

					regulator-min-microvolt = <1350000>;

					regulator-max-microvolt = <1350000>;

					regulator-always-on;

					regulator-boot-on;

				};



				vdd_1v05_run: sd4 {

					regulator-name = "+1.05V_RUN";

					regulator-min-microvolt = <1050000>;

					regulator-max-microvolt = <1050000>;

				};



				vddio_1v8: sd5 {

					regulator-name = "+1.8V_VDDIO";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-boot-on;

					regulator-always-on;

				};



				sd6 {

					regulator-name = "+VDD_GPU_AP";

					regulator-min-microvolt = <650000>;

					regulator-max-microvolt = <1200000>;

					regulator-min-microamp = <3500000>;

					regulator-max-microamp = <3500000>;

					regulator-boot-on;

					regulator-always-on;

				};



				ldo0 {

					regulator-name = "+1.05V_RUN_AVDD";

					regulator-min-microvolt = <1050000>;

					regulator-max-microvolt = <1050000>;

					regulator-boot-on;

					regulator-always-on;

					ams,ext-control = <1>;

				};



				ldo1 {

					regulator-name = "+1.8V_RUN_CAM";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

				};



				ldo2 {

					regulator-name = "+1.2V_GEN_AVDD";

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;

					regulator-boot-on;

					regulator-always-on;

				};



				ldo3 {

					regulator-name = "+1.00V_LP0_VDD_RTC";

					regulator-min-microvolt = <1000000>;

					regulator-max-microvolt = <1000000>;

					regulator-boot-on;

					regulator-always-on;

					ams,enable-tracking;

				};



				vdd_run_cam: ldo4 {

					regulator-name = "+3.3V_RUN_CAM";

					regulator-min-microvolt = <2800000>;

					regulator-max-microvolt = <2800000>;

				};



				ldo5 {

					regulator-name = "+1.2V_RUN_CAM_FRONT";

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;

				};



				vddio_sdmmc3: ldo6 {

					regulator-name = "+VDDIO_SDMMC3";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <3300000>;

				};



				ldo7 {

					regulator-name = "+1.05V_RUN_CAM_REAR";

					regulator-min-microvolt = <1050000>;

					regulator-max-microvolt = <1050000>;

				};



				ldo9 {

					regulator-name = "+2.8V_RUN_TOUCH";

					regulator-min-microvolt = <2800000>;

					regulator-max-microvolt = <2800000>;

				};



				ldo10 {

					regulator-name = "+2.8V_RUN_CAM_AF";

					regulator-min-microvolt = <2800000>;

					regulator-max-microvolt = <2800000>;

				};



				ldo11 {

					regulator-name = "+1.8V_RUN_VPP_FUSE";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

				};

			};

		};

	};



	spi@0,7000d400 {

		status = "okay";



		cros_ec: cros-ec@0 {

			compatible = "google,cros-ec-spi";

			spi-max-frequency = <3000000>;

			interrupt-parent = <&gpio>;

			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;

			reg = <0>;



			google,cros-ec-spi-msg-delay = <2000>;



			i2c-tunnel {

				compatible = "google,cros-ec-i2c-tunnel";

				#address-cells = <1>;

				#size-cells = <0>;



				google,remote-bus = <0>;



				charger: bq24735@9 {

					compatible = "ti,bq24735";

					reg = <0x9>;

					interrupt-parent = <&gpio>;

					interrupts = <TEGRA_GPIO(J, 0)

							GPIO_ACTIVE_HIGH>;

					ti,ac-detect-gpios = <&gpio

							TEGRA_GPIO(J, 0)

							GPIO_ACTIVE_HIGH>;

				};



				battery: sbs-battery@b {

					compatible = "sbs,sbs-battery";

					reg = <0xb>;

					sbs,i2c-retry-count = <2>;

					sbs,poll-retry-count = <10>;

					power-supplies = <&charger>;

				};

			};

		};

	};



	spi@0,7000da00 {

		status = "okay";

		spi-max-frequency = <25000000>;



		flash@0 {

			compatible = "winbond,w25q32dw";

			reg = <0>;

		};

	};



	pmc@0,7000e400 {

		nvidia,invert-interrupt;

		nvidia,suspend-mode = <0>;

		nvidia,cpu-pwr-good-time = <500>;

		nvidia,cpu-pwr-off-time = <300>;

		nvidia,core-pwr-good-time = <641 3845>;

		nvidia,core-pwr-off-time = <61036>;

		nvidia,core-power-req-active-high;

		nvidia,sys-clock-req-active-high;

	};



	hda@0,70030000 {

		status = "okay";

	};



	sdhci@0,700b0000 { /* WiFi/BT on this bus */

		status = "okay";

		power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;

		bus-width = <4>;

		no-1-8-v;

		non-removable;

	};



	sdhci@0,700b0400 { /* SD Card on this bus */

		status = "okay";

		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;

		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;

		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;

		bus-width = <4>;

		no-1-8-v;

		vqmmc-supply = <&vddio_sdmmc3>;

	};



	sdhci@0,700b0600 { /* eMMC on this bus */

		status = "okay";

		bus-width = <8>;

		no-1-8-v;

		non-removable;

	};



	ahub@0,70300000 {

		i2s@0,70301100 {

			status = "okay";

		};

	};



	usb@0,7d000000 { /* Rear external USB port. */

		status = "okay";

	};



	usb-phy@0,7d000000 {

		status = "okay";

		vbus-supply = <&vdd_usb1_vbus>;

	};



	usb@0,7d004000 { /* Internal webcam. */

		status = "okay";

	};



	usb-phy@0,7d004000 {

		status = "okay";

		vbus-supply = <&vdd_run_cam>;

	};



	usb@0,7d008000 { /* Left external USB port. */

		status = "okay";

	};



	usb-phy@0,7d008000 {

		status = "okay";

		vbus-supply = <&vdd_usb3_vbus>;

	};



	backlight: backlight {

		compatible = "pwm-backlight";



		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;

		power-supply = <&vdd_led>;

		pwms = <&pwm 1 1000000>;



		default-brightness-level = <224>;

		brightness-levels =

			<  0   1   2   3   4   5   6   7

			   8   9  10  11  12  13  14  15

			  16  17  18  19  20  21  22  23

			  24  25  26  27  28  29  30  31

			  32  33  34  35  36  37  38  39

			  40  41  42  43  44  45  46  47

			  48  49  50  51  52  53  54  55

			  56  57  58  59  60  61  62  63

			  64  65  66  67  68  69  70  71

			  72  73  74  75  76  77  78  79

			  80  81  82  83  84  85  86  87

			  88  89  90  91  92  93  94  95

			  96  97  98  99 100 101 102 103

			 104 105 106 107 108 109 110 111

			 112 113 114 115 116 117 118 119

			 120 121 122 123 124 125 126 127

			 128 129 130 131 132 133 134 135

			 136 137 138 139 140 141 142 143

			 144 145 146 147 148 149 150 151

			 152 153 154 155 156 157 158 159

			 160 161 162 163 164 165 166 167

			 168 169 170 171 172 173 174 175

			 176 177 178 179 180 181 182 183

			 184 185 186 187 188 189 190 191

			 192 193 194 195 196 197 198 199

			 200 201 202 203 204 205 206 207

			 208 209 210 211 212 213 214 215

			 216 217 218 219 220 221 222 223

			 224 225 226 227 228 229 230 231

			 232 233 234 235 236 237 238 239

			 240 241 242 243 244 245 246 247

			 248 249 250 251 252 253 254 255

			 256>;

	};



	clocks {

		compatible = "simple-bus";

		#address-cells = <1>;

		#size-cells = <0>;



		clk32k_in: clock@0 {

			compatible = "fixed-clock";

			reg = <0>;

			#clock-cells = <0>;

			clock-frequency = <32768>;

		};

	};



	gpio-keys {

		compatible = "gpio-keys";



		lid {

			label = "Lid";

			gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;

			linux,input-type = <5>;

			linux,code = <KEY_RESERVED>;

			debounce-interval = <1>;

			gpio-key,wakeup;

		};



		power {

			label = "Power";

			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;

			linux,code = <KEY_POWER>;

			debounce-interval = <30>;

			gpio-key,wakeup;

		};

	};



	panel: panel {

		compatible = "auo,b133xtn01";



		backlight = <&backlight>;

		ddc-i2c-bus = <&dpaux>;

	};



	regulators {

		compatible = "simple-bus";

		#address-cells = <1>;

		#size-cells = <0>;



		vdd_mux: regulator@0 {

			compatible = "regulator-fixed";

			reg = <0>;

			regulator-name = "+VDD_MUX";

			regulator-min-microvolt = <12000000>;

			regulator-max-microvolt = <12000000>;

			regulator-always-on;

			regulator-boot-on;

		};



		vdd_5v0_sys: regulator@1 {

			compatible = "regulator-fixed";

			reg = <1>;

			regulator-name = "+5V_SYS";

			regulator-min-microvolt = <5000000>;

			regulator-max-microvolt = <5000000>;

			regulator-always-on;

			regulator-boot-on;

			vin-supply = <&vdd_mux>;

		};



		vdd_3v3_sys: regulator@2 {

			compatible = "regulator-fixed";

			reg = <2>;

			regulator-name = "+3.3V_SYS";

			regulator-min-microvolt = <3300000>;

			regulator-max-microvolt = <3300000>;

			regulator-always-on;

			regulator-boot-on;

			vin-supply = <&vdd_mux>;

		};



		vdd_3v3_run: regulator@3 {

			compatible = "regulator-fixed";

			reg = <3>;

			regulator-name = "+3.3V_RUN";

			regulator-min-microvolt = <3300000>;

			regulator-max-microvolt = <3300000>;

			regulator-always-on;

			regulator-boot-on;

			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;

			enable-active-high;

			vin-supply = <&vdd_3v3_sys>;

		};



		vdd_3v3_hdmi: regulator@4 {

			compatible = "regulator-fixed";

			reg = <4>;

			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";

			regulator-min-microvolt = <3300000>;

			regulator-max-microvolt = <3300000>;

			vin-supply = <&vdd_3v3_run>;

		};



		vdd_led: regulator@5 {

			compatible = "regulator-fixed";

			reg = <5>;

			regulator-name = "+VDD_LED";

			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;

			enable-active-high;

			vin-supply = <&vdd_mux>;

		};



		vdd_5v0_ts: regulator@6 {

			compatible = "regulator-fixed";

			reg = <6>;

			regulator-name = "+5V_VDD_TS_SW";

			regulator-min-microvolt = <5000000>;

			regulator-max-microvolt = <5000000>;

			regulator-boot-on;

			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;

			enable-active-high;

			vin-supply = <&vdd_5v0_sys>;

		};



		vdd_usb1_vbus: regulator@7 {

			compatible = "regulator-fixed";

			reg = <7>;

			regulator-name = "+5V_USB_HS";

			regulator-min-microvolt = <5000000>;

			regulator-max-microvolt = <5000000>;

			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;

			enable-active-high;

			gpio-open-drain;

			vin-supply = <&vdd_5v0_sys>;

		};



		vdd_usb3_vbus: regulator@8 {

			compatible = "regulator-fixed";

			reg = <8>;

			regulator-name = "+5V_USB_SS";

			regulator-min-microvolt = <5000000>;

			regulator-max-microvolt = <5000000>;

			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;

			enable-active-high;

			gpio-open-drain;

			vin-supply = <&vdd_5v0_sys>;

		};



		vdd_3v3_panel: regulator@9 {

			compatible = "regulator-fixed";

			reg = <9>;

			regulator-name = "+3.3V_PANEL";

			regulator-min-microvolt = <3300000>;

			regulator-max-microvolt = <3300000>;

			gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;

			enable-active-high;

			vin-supply = <&vdd_3v3_run>;

		};



		vdd_3v3_lp0: regulator@10 {

			compatible = "regulator-fixed";

			reg = <10>;

			regulator-name = "+3.3V_LP0";

			regulator-min-microvolt = <3300000>;

			regulator-max-microvolt = <3300000>;

			/*

			 * TODO: find a way to wire this up with the USB EHCI

			 * controllers so that it can be enabled on demand.

			 */

			regulator-always-on;

			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;

			enable-active-high;

			vin-supply = <&vdd_3v3_sys>;

		};



		vdd_hdmi_pll: regulator@11 {

			compatible = "regulator-fixed";

			reg = <11>;

			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";

			regulator-min-microvolt = <1050000>;

			regulator-max-microvolt = <1050000>;

			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;

			vin-supply = <&vdd_1v05_run>;

		};



		vdd_5v0_hdmi: regulator@12 {

			compatible = "regulator-fixed";

			reg = <12>;

			regulator-name = "+5V_HDMI_CON";

			regulator-min-microvolt = <5000000>;

			regulator-max-microvolt = <5000000>;

			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;

			enable-active-high;

			vin-supply = <&vdd_5v0_sys>;

		};

	};



	sound {

		compatible = "nvidia,tegra-audio-max98090-nyan-big",

			     "nvidia,tegra-audio-max98090";

		nvidia,model = "GoogleNyanBig";



		nvidia,audio-routing =

			"Headphones", "HPR",

			"Headphones", "HPL",

			"Speakers", "SPKR",

			"Speakers", "SPKL",

			"Mic Jack", "MICBIAS",

			"DMICL", "Int Mic",

			"DMICR", "Int Mic",

			"IN34", "Mic Jack";



		nvidia,i2s-controller = <&tegra_i2s1>;

		nvidia,audio-codec = <&acodec>;



		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,

			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,

			 <&tegra_car TEGRA124_CLK_EXTERN1>;

		clock-names = "pll_a", "pll_a_out0", "mclk";



		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;

		nvidia,mic-det-gpios =

				<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;

	};

};



#include "cros-ec-keyboard.dtsi"

arch/arm/boot/dts/tegra124-nyan.dtsi

0 → 100644
+672 −0

File added.

Preview size limit exceeded, changes collapsed.