Commit 52f88657 authored by Larry Finger's avatar Larry Finger Committed by Kalle Valo
Browse files

rtlwifi: rtl8192com: Fix blank line problems 



The following types of blank line problems are reported:

WARNING: Missing a blank line after declarations
CHECK: Please don't use multiple blank lines

There are no code changes.

Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent 6d255202

drivers/net/wireless/realtek/rtlwifi/rtl8192c/dm_common.c

+2 −4
Original line number Diff line number Diff line
@@ -425,7 +425,6 @@ static void rtl92c_dm_initial_gain_sta(struct ieee80211_hw *hw) 
	if (dm_digtable->presta_cstate == dm_digtable->cursta_cstate ||

	    dm_digtable->cursta_cstate == DIG_STA_BEFORE_CONNECT ||

	    dm_digtable->cursta_cstate == DIG_STA_CONNECT) {



		if (dm_digtable->cursta_cstate != DIG_STA_DISCONNECT) {

			dm_digtable->rssi_val_min =

			    rtl92c_dm_initial_gain_min_pwdb(hw);
@@ -504,7 +503,6 @@ static void rtl92c_dm_ctrl_initgain_by_twoport(struct ieee80211_hw *hw) 
	rtl92c_dm_cck_packet_detection_thresh(hw);



	dm_digtable->presta_cstate = dm_digtable->cursta_cstate;



}



static void rtl92c_dm_dig(struct ieee80211_hw *hw)
@@ -607,6 +605,7 @@ static void rtl92c_dm_pwdb_monitor(struct ieee80211_hw *hw) 
void rtl92c_dm_init_edca_turbo(struct ieee80211_hw *hw)

{

	struct rtl_priv *rtlpriv = rtl_priv(hw);



	rtlpriv->dm.current_turbo_edca = false;

	rtlpriv->dm.is_any_nonbepkts = false;

	rtlpriv->dm.is_cur_rdlstate = false;
@@ -660,7 +659,6 @@ static void rtl92c_dm_check_edca_turbo(struct ieee80211_hw *hw) 


	if ((bt_change_edca) || ((!rtlpriv->dm.is_any_nonbepkts) &&

	     (!rtlpriv->dm.disable_framebursting))) {



		cur_txok_cnt = rtlpriv->stats.txbytesunicast - last_txok_cnt;

		cur_rxok_cnt = rtlpriv->stats.rxbytesunicast - last_rxok_cnt;
@@ -685,6 +683,7 @@ static void rtl92c_dm_check_edca_turbo(struct ieee80211_hw *hw) 
	} else {

		if (rtlpriv->dm.current_turbo_edca) {

			u8 tmp = AC0_BE;



			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AC_PARAM,

						      &tmp);

			rtlpriv->dm.current_turbo_edca = false;
@@ -1635,7 +1634,6 @@ static void rtl92c_bt_ant_isolation(struct ieee80211_hw *hw, u8 tmp1byte) 
{

	struct rtl_priv *rtlpriv = rtl_priv(hw);





	/* Only enable HW BT coexist when BT in "Busy" state. */

	if (rtlpriv->mac80211.vendor == PEER_CISCO &&

	    rtlpriv->btcoexist.bt_service == BT_OTHER_ACTION) {

drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c

+2 −3
Original line number Diff line number Diff line
@@ -18,6 +18,7 @@ static void _rtl92c_enable_fw_download(struct ieee80211_hw *hw, bool enable) 


	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8192CU) {

		u32 value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);



		if (enable)

			value32 |= MCUFWDL_EN;

		else
@@ -25,8 +26,8 @@ static void _rtl92c_enable_fw_download(struct ieee80211_hw *hw, bool enable) 
		rtl_write_dword(rtlpriv, REG_MCUFWDL, value32);

	} else if (rtlhal->hw_type == HARDWARE_TYPE_RTL8192CE) {

		u8 tmp;

		if (enable) {



		if (enable) {

			tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);

			rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1,

				       tmp | 0x04);
@@ -37,7 +38,6 @@ static void _rtl92c_enable_fw_download(struct ieee80211_hw *hw, bool enable) 
			tmp = rtl_read_byte(rtlpriv, REG_MCUFWDL + 2);

			rtl_write_byte(rtlpriv, REG_MCUFWDL + 2, tmp & 0xf7);

		} else {



			tmp = rtl_read_byte(rtlpriv, REG_MCUFWDL);

			rtl_write_byte(rtlpriv, REG_MCUFWDL, tmp & 0xfe);
@@ -622,7 +622,6 @@ void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, 
		      "rtl92c_set_fw_rsvdpagepkt(): HW_VAR_SET_TX_CMD: ALL\n",

		      u1rsvdpageloc, 3);





	skb = dev_alloc_skb(totalpacketlen);

	skb_put_data(skb, &reserved_page_packet, totalpacketlen);

drivers/net/wireless/realtek/rtlwifi/rtl8192c/main.c

+0 −1
Original line number Diff line number Diff line
@@ -4,7 +4,6 @@ 
#include "../wifi.h"

#include <linux/module.h>





MODULE_AUTHOR("lizhaoming	<chaoming_li@realsil.com.cn>");

MODULE_AUTHOR("Realtek WlanFAE	<wlanfae@realtek.com>");

MODULE_AUTHOR("Georgia		<georgia@realtek.com>");

drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c

+1 −0
Original line number Diff line number Diff line
@@ -747,6 +747,7 @@ static void _rtl92c_phy_sw_rf_seting(struct ieee80211_hw *hw, u8 channel) 
	struct rtl_priv *rtlpriv = rtl_priv(hw);

	struct rtl_phy *rtlphy = &(rtlpriv->phy);

	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));



	if (IS_81XXC_VENDOR_UMC_B_CUT(rtlhal->version)) {

		if (channel == 6 &&

		    rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20) {