Commit 519183af authored by Bjorn Andersson's avatar Bjorn Andersson
Browse files

arm64: dts: qcom: add SA8540P and ADP 



Introduce the Qualcomm SA8540P automotive platform and the SA8295P ADP
development board.

The SA8540P and SC8280XP are fairly similar, so the SA8540P is built
ontop of the SC8280XP dtsi to reduce duplication. As more advanced
features are integrated this might be re-evaluated.

This initial contribution supports SMP, CPUFreq, cluster idle, UFS, RPMh
regulators, debug UART, PMICs, remoteprocs (NSPs crashes shortly after
booting) and USB.

The SA8295P ADP contains four PM8450 PMICs, which according to their
revid are compatible with PM8150. They are defined within the ADP for
now, to avoid creating additional .dtsi files for PM8150 with just
addresses changed - and to allow using the labels from the schematics.

Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: default avatarJohan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220629041438.1352536-6-bjorn.andersson@linaro.org
parent ccd3517f

arch/arm64/boot/dts/qcom/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -49,6 +49,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb 
dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1-lte.dtb

arch/arm64/boot/dts/qcom/sa8295p-adp.dts

0 → 100644
+389 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: BSD-3-Clause

/*

 * Copyright (c) 2021, The Linux Foundation. All rights reserved.

 * Copyright (c) 2022, Linaro Limited

 */



/dts-v1/;



#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/regulator/qcom,rpmh-regulator.h>

#include <dt-bindings/spmi/spmi.h>



#include "sa8540p.dtsi"



/ {

	model = "Qualcomm SA8295P ADP";

	compatible = "qcom,sa8295p-adp", "qcom,sa8540p";



	aliases {

		serial0 = &qup2_uart17;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};

};



&apps_rsc {

	pmm8540-a-regulators {

		compatible = "qcom,pm8150-rpmh-regulators";

		qcom,pmic-id = "a";



		vreg_l3a: ldo3 {

			regulator-name = "vreg_l3a";

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1208000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

			regulator-allow-set-load;

		};



		vreg_l5a: ldo5 {

			regulator-name = "vreg_l5a";

			regulator-min-microvolt = <912000>;

			regulator-max-microvolt = <912000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

			regulator-allow-set-load;

		};



		vreg_l7a: ldo7 {

			regulator-name = "vreg_l7a";

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

			regulator-allow-set-load;

		};



		vreg_l13a: ldo13 {

			regulator-name = "vreg_l13a";

			regulator-min-microvolt = <3072000>;

			regulator-max-microvolt = <3072000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

			regulator-allow-set-load;

		};

	};



	pmm8540-c-regulators {

		compatible = "qcom,pm8150-rpmh-regulators";

		qcom,pmic-id = "c";



		vreg_l1c: ldo1 {

			regulator-name = "vreg_l1c";

			regulator-min-microvolt = <912000>;

			regulator-max-microvolt = <912000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

			regulator-allow-set-load;

		};



		vreg_l2c: ldo2 {

			regulator-name = "vreg_l2c";

			regulator-min-microvolt = <3072000>;

			regulator-max-microvolt = <3072000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

			regulator-allow-set-load;

		};



		vreg_l3c: ldo3 {

			regulator-name = "vreg_l3c";

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

			regulator-allow-set-load;

		};



		vreg_l4c: ldo4 {

			regulator-name = "vreg_l4c";

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1208000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

			regulator-allow-set-load;

		};



		vreg_l6c: ldo6 {

			regulator-name = "vreg_l6c";

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

			regulator-allow-set-load;

		};



		vreg_l7c: ldo7 {

			regulator-name = "vreg_l7c";

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

			regulator-allow-set-load;

		};



		vreg_l10c: ldo10 {

			regulator-name = "vreg_l10c";

			regulator-min-microvolt = <2504000>;

			regulator-max-microvolt = <2504000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

			regulator-allow-set-load;

		};



		vreg_l17c: ldo17 {

			regulator-name = "vreg_l17c";

			regulator-min-microvolt = <2504000>;

			regulator-max-microvolt = <2504000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

			regulator-allow-set-load;

		};

	};



	pmm8540-g-regulators {

		compatible = "qcom,pm8150-rpmh-regulators";

		qcom,pmic-id = "g";



		vreg_l3g: ldo3 {

			regulator-name = "vreg_l3g";

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

			regulator-allow-set-load;

		};



		vreg_l7g: ldo7 {

			regulator-name = "vreg_l7g";

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

			regulator-allow-set-load;

		};



		vreg_l8g: ldo8 {

			regulator-name = "vreg_l8g";

			regulator-min-microvolt = <880000>;

			regulator-max-microvolt = <880000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

			regulator-allow-set-load;

		};

	};

};



&qup2 {

	status = "okay";

};



&qup2_uart17 {

	compatible = "qcom,geni-debug-uart";

	status = "okay";

};



&remoteproc_adsp {

	firmware-name = "qcom/sa8540p/adsp.mbn";

	status = "okay";

};



&remoteproc_nsp0 {

	firmware-name = "qcom/sa8540p/cdsp.mbn";

	status = "okay";

};



&remoteproc_nsp1 {

	firmware-name = "qcom/sa8540p/cdsp1.mbn";

	status = "okay";

};



&spmi_bus {

	pm8450a: pmic@0 {

		compatible = "qcom,pm8150", "qcom,spmi-pmic";

		reg = <0x0 SPMI_USID>;

		#address-cells = <1>;

		#size-cells = <0>;



		pm8450a_gpios: gpio@c000 {

			compatible = "qcom,pm8150-gpio";

			reg = <0xc000>;

			gpio-controller;

			#gpio-cells = <2>;

			interrupt-controller;

			#interrupt-cells = <2>;

		};

	};



	pm8450c: pmic@4 {

		compatible = "qcom,pm8150", "qcom,spmi-pmic";

		reg = <0x4 SPMI_USID>;

		#address-cells = <1>;

		#size-cells = <0>;



		pm8450c_gpios: gpio@c000 {

			compatible = "qcom,pm8150-gpio";

			reg = <0xc000>;

			gpio-controller;

			#gpio-cells = <2>;

			interrupt-controller;

			#interrupt-cells = <2>;

		};

	};



	pm8450e: pmic@8 {

		compatible = "qcom,pm8150", "qcom,spmi-pmic";

		reg = <0x8 SPMI_USID>;

		#address-cells = <1>;

		#size-cells = <0>;



		pm8450e_gpios: gpio@c000 {

			compatible = "qcom,pm8150-gpio";

			reg = <0xc000>;

			gpio-controller;

			#gpio-cells = <2>;

			interrupt-controller;

			#interrupt-cells = <2>;

		};

	};



	pm8450g: pmic@c {

		compatible = "qcom,pm8150", "qcom,spmi-pmic";

		reg = <0xc SPMI_USID>;

		#address-cells = <1>;

		#size-cells = <0>;



		pm8450g_gpios: gpio@c000 {

			compatible = "qcom,pm8150-gpio";

			reg = <0xc000>;

			gpio-controller;

			#gpio-cells = <2>;

			interrupt-controller;

			#interrupt-cells = <2>;

		};

	};

};



&ufs_mem_hc {

	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;



	vcc-supply = <&vreg_l17c>;

	vcc-max-microamp = <800000>;

	vccq-supply = <&vreg_l6c>;

	vccq-max-microamp = <900000>;



	status = "okay";

};



&ufs_mem_phy {

	vdda-phy-supply = <&vreg_l8g>;

	vdda-pll-supply = <&vreg_l3g>;



	status = "okay";

};



&ufs_card_hc {

	reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>;



	vcc-supply = <&vreg_l10c>;

	vcc-max-microamp = <800000>;

	vccq-supply = <&vreg_l3c>;

	vccq-max-microamp = <900000>;



	status = "okay";

};



&ufs_card_phy {

	vdda-phy-supply = <&vreg_l8g>;

	vdda-pll-supply = <&vreg_l3g>;



	status = "okay";

};



&usb_0 {

	status = "okay";

};



&usb_0_dwc3 {

	/* TODO: Define USB-C connector properly */

	dr_mode = "peripheral";

};



&usb_0_hsphy {

	vdda-pll-supply = <&vreg_l5a>;

	vdda18-supply = <&vreg_l7a>;

	vdda33-supply = <&vreg_l13a>;



	status = "okay";

};



&usb_0_qmpphy {

	vdda-phy-supply = <&vreg_l3a>;

	vdda-pll-supply = <&vreg_l5a>;



	status = "okay";

};



&usb_1 {

	status = "okay";

};



&usb_1_dwc3 {

	/* TODO: Define USB-C connector properly */

	dr_mode = "host";

};



&usb_1_hsphy {

	vdda-pll-supply = <&vreg_l1c>;

	vdda18-supply = <&vreg_l7c>;

	vdda33-supply = <&vreg_l2c>;



	status = "okay";

};



&usb_1_qmpphy {

	vdda-phy-supply = <&vreg_l4c>;

	vdda-pll-supply = <&vreg_l1c>;



	status = "okay";

};



&usb_2_hsphy0 {

	vdda-pll-supply = <&vreg_l5a>;

	vdda18-supply = <&vreg_l7g>;

	vdda33-supply = <&vreg_l13a>;



	status = "okay";

};



&usb_2_hsphy1 {

	vdda-pll-supply = <&vreg_l5a>;

	vdda18-supply = <&vreg_l7g>;

	vdda33-supply = <&vreg_l13a>;



	status = "okay";

};



&usb_2_hsphy2 {

	vdda-pll-supply = <&vreg_l5a>;

	vdda18-supply = <&vreg_l7g>;

	vdda33-supply = <&vreg_l13a>;



	status = "okay";

};



&usb_2_hsphy3 {

	vdda-pll-supply = <&vreg_l5a>;

	vdda18-supply = <&vreg_l7g>;

	vdda33-supply = <&vreg_l13a>;



	status = "okay";

};



&usb_2_qmpphy0 {

	vdda-phy-supply = <&vreg_l3a>;

	vdda-pll-supply = <&vreg_l5a>;



	status = "okay";

};



&usb_2_qmpphy1 {

	vdda-phy-supply = <&vreg_l3a>;

	vdda-pll-supply = <&vreg_l5a>;



	status = "okay";

};



&xo_board_clk {

	clock-frequency = <38400000>;

};



/* PINCTRL */

arch/arm64/boot/dts/qcom/sa8540p.dtsi

0 → 100644
+133 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: BSD-3-Clause

/*

 * Copyright (c) 2021, The Linux Foundation. All rights reserved.

 * Copyright (c) 2022, Linaro Limited

 */



#include "sc8280xp.dtsi"



/delete-node/ &cpu0_opp_table;

/delete-node/ &cpu4_opp_table;



/ {

	cpu0_opp_table: cpu0-opp-table {

		compatible = "operating-points-v2";

		opp-shared;



		opp-403200000 {

			opp-hz = /bits/ 64 <403200000>;

		};

		opp-499200000 {

			opp-hz = /bits/ 64 <499200000>;

		};

		opp-595200000 {

			opp-hz = /bits/ 64 <595200000>;

		};

		opp-710400000 {

			opp-hz = /bits/ 64 <710400000>;

		};

		opp-806400000 {

			opp-hz = /bits/ 64 <806400000>;

		};

		opp-902400000 {

			opp-hz = /bits/ 64 <902400000>;

		};

		opp-1017600000 {

			opp-hz = /bits/ 64 <1017600000>;

		};

		opp-1113600000 {

			opp-hz = /bits/ 64 <1113600000>;

		};

		opp-1209600000 {

			opp-hz = /bits/ 64 <1209600000>;

		};

		opp-1324800000 {

			opp-hz = /bits/ 64 <1324800000>;

		};

		opp-1440000000 {

			opp-hz = /bits/ 64 <1440000000>;

		};

		opp-1555200000 {

			opp-hz = /bits/ 64 <1555200000>;

		};

		opp-1670400000 {

			opp-hz = /bits/ 64 <1670400000>;

		};

		opp-1785600000 {

			opp-hz = /bits/ 64 <1785600000>;

		};

		opp-1881600000 {

			opp-hz = /bits/ 64 <1881600000>;

		};

		opp-2016000000 {

			opp-hz = /bits/ 64 <2016000000>;

		};

		opp-2131200000 {

			opp-hz = /bits/ 64 <2131200000>;

		};

		opp-2246400000 {

			opp-hz = /bits/ 64 <2246400000>;

		};

	};



	cpu4_opp_table: cpu4-opp-table {

		compatible = "operating-points-v2";

		opp-shared;



		opp-825600000 {

			opp-hz = /bits/ 64 <825600000>;

		};

		opp-940800000 {

			opp-hz = /bits/ 64 <940800000>;

		};

		opp-1056000000 {

			opp-hz = /bits/ 64 <1056000000>;

		};

		opp-1171200000 {

			opp-hz = /bits/ 64 <1171200000>;

		};

		opp-1286400000 {

			opp-hz = /bits/ 64 <1286400000>;

		};

		opp-1401600000 {

			opp-hz = /bits/ 64 <1401600000>;

		};

		opp-1516800000 {

			opp-hz = /bits/ 64 <1516800000>;

		};

		opp-1632000000 {

			opp-hz = /bits/ 64 <1632000000>;

		};

		opp-1747200000 {

			opp-hz = /bits/ 64 <1747200000>;

		};

		opp-1862400000 {

			opp-hz = /bits/ 64 <1862400000>;

		};

		opp-1977600000 {

			opp-hz = /bits/ 64 <1977600000>;

		};

		opp-2073600000 {

			opp-hz = /bits/ 64 <2073600000>;

		};

		opp-2169600000 {

			opp-hz = /bits/ 64 <2169600000>;

		};

		opp-2284800000 {

			opp-hz = /bits/ 64 <2284800000>;

		};

		opp-2380800000 {

			opp-hz = /bits/ 64 <2380800000>;

		};

		opp-2496000000 {

			opp-hz = /bits/ 64 <2496000000>;

		};

		opp-2592000000 {

			opp-hz = /bits/ 64 <2592000000>;

		};

	};

};



&rpmhpd {

	compatible = "qcom,sa8540p-rpmhpd";

};