can: sja1000: Makefile/Kconfig: sort alphabetically (4dfc39e1) · Commits · EulixOS / Software / Kernel

drivers/net/can/sja1000/Kconfig

+36 −35

Original line number	Diff line number	Diff line
		# SPDX-License-Identifier: GPL-2.0-only

		menuconfig CAN_SJA1000
		tristate "Philips/NXP SJA1000 devices"
		depends on HAS_IOMEM

		if CAN_SJA1000

		config CAN_SJA1000_ISA
		tristate "ISA Bus based legacy SJA1000 driver"
		---help---
		This driver adds legacy support for SJA1000 chips connected to
		the ISA bus using I/O port, memory mapped or indirect access.

		config CAN_SJA1000_PLATFORM
		tristate "Generic Platform Bus based SJA1000 driver"
		config CAN_EMS_PCI
		tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
		depends on PCI
		---help---
		This driver adds support for the SJA1000 chips connected to
		the "platform bus" (Linux abstraction for directly to the
		processor attached devices). Which can be found on various
		boards from Phytec (http://www.phytec.de) like the PCM027,
		PCM038. It also provides the OpenFirmware "platform bus" found
		on embedded systems with OpenFirmware bindings, e.g. if you
		have a PowerPC based system you may want to enable this option.
		This driver is for the one, two or four channel CPC-PCI,
		CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
		(http://www.ems-wuensche.de).

		config CAN_EMS_PCMCIA
		tristate "EMS CPC-CARD Card"
		@@ -29,23 +21,12 @@ config CAN_EMS_PCMCIA
		This driver is for the one or two channel CPC-CARD cards from
		EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).

		config CAN_EMS_PCI
		tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
		config CAN_KVASER_PCI
		tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
		depends on PCI
		---help---
		This driver is for the one, two or four channel CPC-PCI,
		CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
		(http://www.ems-wuensche.de).

		config CAN_PEAK_PCMCIA
		tristate "PEAK PCAN-PC Card"
		depends on PCMCIA
		depends on HAS_IOPORT_MAP
		---help---
		This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
		from PEAK-System (http://www.peak-system.com). To compile this
		driver as a module, choose M here: the module will be called
		peak_pcmcia.
		This driver is for the PCIcanx and PCIcan cards (1, 2 or
		4 channel) from Kvaser (http://www.kvaser.com).

		config CAN_PEAK_PCI
		tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
		@@ -66,12 +47,15 @@ config CAN_PEAK_PCIEC
		Technik. This will also automatically select I2C and I2C_ALGO
		configuration options.

		config CAN_KVASER_PCI
		tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
		depends on PCI
		config CAN_PEAK_PCMCIA
		tristate "PEAK PCAN-PC Card"
		depends on PCMCIA
		depends on HAS_IOPORT_MAP
		---help---
		This driver is for the PCIcanx and PCIcan cards (1, 2 or
		4 channel) from Kvaser (http://www.kvaser.com).
		This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
		from PEAK-System (http://www.peak-system.com). To compile this
		driver as a module, choose M here: the module will be called
		peak_pcmcia.

		config CAN_PLX_PCI
		tristate "PLX90xx PCI-bridge based Cards"
		@@ -91,6 +75,23 @@ config CAN_PLX_PCI
		- Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com)
		- ASEM CAN raw - 2 isolated CAN channels (www.asem.it)

		config CAN_SJA1000_ISA
		tristate "ISA Bus based legacy SJA1000 driver"
		---help---
		This driver adds legacy support for SJA1000 chips connected to
		the ISA bus using I/O port, memory mapped or indirect access.

		config CAN_SJA1000_PLATFORM
		tristate "Generic Platform Bus based SJA1000 driver"
		---help---
		This driver adds support for the SJA1000 chips connected to
		the "platform bus" (Linux abstraction for directly to the
		processor attached devices). Which can be found on various
		boards from Phytec (http://www.phytec.de) like the PCM027,
		PCM038. It also provides the OpenFirmware "platform bus" found
		on embedded systems with OpenFirmware bindings, e.g. if you
		have a PowerPC based system you may want to enable this option.

		config CAN_TSCAN1
		tristate "TS-CAN1 PC104 boards"
		depends on ISA

drivers/net/can/sja1000/Makefile

+5 −5

Original line number	Diff line number	Diff line
		@@ -3,13 +3,13 @@
		# Makefile for the SJA1000 CAN controller drivers.
		#

		obj-$(CONFIG_CAN_SJA1000) += sja1000.o
		obj-$(CONFIG_CAN_SJA1000_ISA) += sja1000_isa.o
		obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o
		obj-$(CONFIG_CAN_EMS_PCMCIA) += ems_pcmcia.o
		obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
		obj-$(CONFIG_CAN_EMS_PCMCIA) += ems_pcmcia.o
		obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o
		obj-$(CONFIG_CAN_PEAK_PCMCIA) += peak_pcmcia.o
		obj-$(CONFIG_CAN_PEAK_PCI) += peak_pci.o
		obj-$(CONFIG_CAN_PEAK_PCMCIA) += peak_pcmcia.o
		obj-$(CONFIG_CAN_PLX_PCI) += plx_pci.o
		obj-$(CONFIG_CAN_SJA1000) += sja1000.o
		obj-$(CONFIG_CAN_SJA1000_ISA) += sja1000_isa.o
		obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o
		obj-$(CONFIG_CAN_TSCAN1) += tscan1.o