Merge remote-tracking branch 'regulator/for-5.13' into regulator-next

Binding for Fairchild FAN53555 regulators

Required properties:

  - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827" or

		"silergy,syr828"

  - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827",

		"silergy,syr828" or "tcs,tcs4525".

  - reg: I2C address

Optional properties:

Qualcomm Technologies, Inc. RPMh Regulators

rpmh-regulator devices support PMIC regulator management via the Voltage

Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators.  The APPS

processor communicates with these hardware blocks via a Resource State

Coordinator (RSC) using command packets.  The VRM allows changing three

parameters for a given regulator: enable state, output voltage, and operating

mode.  The XOB allows changing only a single parameter for a given regulator:

its enable state.  Despite its name, the XOB is capable of controlling the

enable state of any PMIC peripheral.  It is used for clock buffers, low-voltage

switches, and LDO/SMPS regulators which have a fixed voltage and mode.

=======================

Required Node Structure

=======================

RPMh regulators must be described in two levels of device nodes.  The first

level describes the PMIC containing the regulators and must reside within an

RPMh device node.  The second level describes each regulator within the PMIC

which is to be used on the board.  Each of these regulators maps to a single

RPMh resource.

The names used for regulator nodes must match those supported by a given PMIC.

Supported regulator node names:

	PM8005:		smps1 - smps4

	PM8009:		smps1 - smps2, ldo1 - ldo7

	PM8150:		smps1 - smps10, ldo1 - ldo18

	PM8150L:	smps1 - smps8, ldo1 - ldo11, bob, flash, rgb

	PM8350:		smps1 - smps12, ldo1 - ldo10,

	PM8350C:	smps1 - smps10, ldo1 - ldo13, bob

	PM8998:		smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2

	PMI8998:	bob

	PM6150:         smps1 - smps5, ldo1 - ldo19

	PM6150L:        smps1 - smps8, ldo1 - ldo11, bob

	PMX55:		smps1 - smps7, ldo1 - ldo16

========================

First Level Nodes - PMIC

========================

- compatible

	Usage:      required

	Value type: <string>

	Definition: Must be one of below:

		    "qcom,pm8005-rpmh-regulators"

		    "qcom,pm8009-rpmh-regulators"

		    "qcom,pm8009-1-rpmh-regulators"

		    "qcom,pm8150-rpmh-regulators"

		    "qcom,pm8150l-rpmh-regulators"

		    "qcom,pm8350-rpmh-regulators"

		    "qcom,pm8350c-rpmh-regulators"

		    "qcom,pm8998-rpmh-regulators"

		    "qcom,pmc8180-rpmh-regulators"

		    "qcom,pmc8180c-rpmh-regulators"

		    "qcom,pmi8998-rpmh-regulators"

		    "qcom,pm6150-rpmh-regulators"

		    "qcom,pm6150l-rpmh-regulators"

		    "qcom,pmx55-rpmh-regulators"

- qcom,pmic-id

	Usage:      required

	Value type: <string>

	Definition: RPMh resource name suffix used for the regulators found on

		    this PMIC.  Typical values: "a", "b", "c", "d", "e", "f".

- vdd-s1-supply

- vdd-s2-supply

- vdd-s3-supply

- vdd-s4-supply

	Usage:      optional (PM8998 and PM8005 only)

	Value type: <phandle>

	Definition: phandle of the parent supply regulator of one or more of the

		    regulators for this PMIC.

- vdd-s5-supply

- vdd-s6-supply

- vdd-s7-supply

- vdd-s8-supply

- vdd-s9-supply

- vdd-s10-supply

- vdd-s11-supply

- vdd-s12-supply

- vdd-s13-supply

- vdd-l1-l27-supply

- vdd-l2-l8-l17-supply

- vdd-l3-l11-supply

- vdd-l4-l5-supply

- vdd-l6-supply

- vdd-l7-l12-l14-l15-supply

- vdd-l9-supply

- vdd-l10-l23-l25-supply

- vdd-l13-l19-l21-supply

- vdd-l16-l28-supply

- vdd-l18-l22-supply

- vdd-l20-l24-supply

- vdd-l26-supply

- vin-lvs-1-2-supply

	Usage:      optional (PM8998 only)

	Value type: <phandle>

	Definition: phandle of the parent supply regulator of one or more of the

		    regulators for this PMIC.

- vdd-bob-supply

	Usage:      optional (PMI8998 only)

	Value type: <phandle>

	Definition: BOB regulator parent supply phandle

===============================

Second Level Nodes - Regulators

===============================

- qcom,always-wait-for-ack

	Usage:      optional

	Value type: <empty>

	Definition: Boolean flag which indicates that the application processor

		    must wait for an ACK or a NACK from RPMh for every request

		    sent for this regulator including those which are for a

		    strictly lower power state.

Other properties defined in Documentation/devicetree/bindings/regulator/regulator.txt

may also be used.  regulator-initial-mode and regulator-allowed-modes may be

specified for VRM regulators using mode values from

include/dt-bindings/regulator/qcom,rpmh-regulator.h.  regulator-allow-bypass

may be specified for BOB type regulators managed via VRM.

regulator-allow-set-load may be specified for LDO type regulators managed via

VRM.

========

Examples

========

#include <dt-bindings/regulator/qcom,rpmh-regulator.h>

&apps_rsc {

	pm8998-rpmh-regulators {

		compatible = "qcom,pm8998-rpmh-regulators";

		qcom,pmic-id = "a";

		vdd-l7-l12-l14-l15-supply = <&pm8998_s5>;

		smps2 {

			regulator-min-microvolt = <1100000>;

			regulator-max-microvolt = <1100000>;

		};

		pm8998_s5: smps5 {

			regulator-min-microvolt = <1904000>;

			regulator-max-microvolt = <2040000>;

		};

		ldo7 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

			regulator-allowed-modes =

				<RPMH_REGULATOR_MODE_LPM

				 RPMH_REGULATOR_MODE_HPM>;

			regulator-allow-set-load;

		};

		lvs1 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};

	};

	pmi8998-rpmh-regulators {

		compatible = "qcom,pmi8998-rpmh-regulators";

		qcom,pmic-id = "b";

		bob {

			regulator-min-microvolt = <3312000>;

			regulator-max-microvolt = <3600000>;

			regulator-allowed-modes =

				<RPMH_REGULATOR_MODE_AUTO

				 RPMH_REGULATOR_MODE_HPM>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;

		};

	};

};

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)

%YAML 1.2

---

$id: http://devicetree.org/schemas/regulator/qcom,rpmh-regulator.yaml#

$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm Technologies, Inc. RPMh Regulators

maintainers:

  - David Collins <collinsd@codeaurora.org>

description: |

    rpmh-regulator devices support PMIC regulator management via the Voltage

    Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators.

    The APPS processor communicates with these hardware blocks via a

    Resource State Coordinator (RSC) using command packets.  The VRM allows

    changing three parameters for a given regulator, enable state, output

    voltage, and operating mode.  The XOB allows changing only a single

    parameter for a given regulator, its enable state.  Despite its name,

    the XOB is capable of controlling the enable state of any PMIC peripheral.

    It is used for clock buffers, low-voltage switches, and LDO/SMPS regulators

    which have a fixed voltage and mode.

    =======================

    Required Node Structure

    =======================

    RPMh regulators must be described in two levels of device nodes.  The first

    level describes the PMIC containing the regulators and must reside within an

    RPMh device node.  The second level describes each regulator within the PMIC

    which is to be used on the board.  Each of these regulators maps to a single

    RPMh resource.

    The names used for regulator nodes must match those supported by a given

    PMIC. Supported regulator node names are

      For PM8005, smps1 - smps4

      For PM8009, smps1 - smps2, ldo1 - ldo7

      For PM8150, smps1 - smps10, ldo1 - ldo18

      For PM8150L, smps1 - smps8, ldo1 - ldo11, bob, flash, rgb

      For PM8350, smps1 - smps12, ldo1 - ldo10

      For PM8350C, smps1 - smps10, ldo1 - ldo13, bob

      For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2

      For PMI8998, bob

      For PM6150, smps1 - smps5, ldo1 - ldo19

      For PM6150L, smps1 - smps8, ldo1 - ldo11, bob

      For PMX55, smps1 - smps7, ldo1 - ldo16

      For PM7325, smps1 - smps8, ldo1 - ldo19

      For PMR735A, smps1 - smps3, ldo1 - ldo7

properties:

  compatible:

    enum:

      - qcom,pm8005-rpmh-regulators

      - qcom,pm8009-rpmh-regulators

      - qcom,pm8009-1-rpmh-regulators

      - qcom,pm8150-rpmh-regulators

      - qcom,pm8150l-rpmh-regulators

      - qcom,pm8350-rpmh-regulators

      - qcom,pm8350c-rpmh-regulators

      - qcom,pm8998-rpmh-regulators

      - qcom,pmi8998-rpmh-regulators

      - qcom,pm6150-rpmh-regulators

      - qcom,pm6150l-rpmh-regulators

      - qcom,pmx55-rpmh-regulators

      - qcom,pm7325-rpmh-regulators

      - qcom,pmr735a-rpmh-regulators

  qcom,pmic-id:

    description: |

        RPMh resource name suffix used for the regulators found

        on this PMIC.

    $ref: /schemas/types.yaml#/definitions/string

    enum: [a, b, c, d, e, f]

  qcom,always-wait-for-ack:

    description: |

        Boolean flag which indicates that the application processor

        must wait for an ACK or a NACK from RPMh for every request

        sent for this regulator including those which are for a

        strictly lower power state.

    $ref: /schemas/types.yaml#/definitions/flag

  vdd-flash-supply:

    description: Input supply phandle of flash.

  vdd-rgb-supply:

    description: Input supply phandle of rgb.

  vin-lvs-1-2-supply:

    description: Input supply phandle of one or more regulators.

  vdd-bob-supply:

    description: BOB regulator parent supply phandle.

  bob:

    type: object

    $ref: "regulator.yaml#"

    description: BOB regulator node.

patternProperties:

  "^vdd-s([0-9]+)-supply$":

    description: Input supply phandle(s) of one or more regulators.

  "^vdd-(l[0-9]+[-]){1,5}supply$":

    description: Input supply phandle(s) of one or more regulators.

  "^(smps|ldo|lvs)[0-9]+$":

    type: object

    $ref: "regulator.yaml#"

    description: smps/ldo regulator nodes(s).

additionalProperties: false

required:

  - compatible

  - qcom,pmic-id

examples:

  - |

    #include <dt-bindings/regulator/qcom,rpmh-regulator.h>

    pm8998-rpmh-regulators {

        compatible = "qcom,pm8998-rpmh-regulators";

        qcom,pmic-id = "a";

        vdd-l7-l12-l14-l15-supply = <&pm8998_s5>;

        smps2 {

            regulator-min-microvolt = <1100000>;

            regulator-max-microvolt = <1100000>;

        };

        ldo7 {

            regulator-min-microvolt = <1800000>;

            regulator-max-microvolt = <1800000>;

            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

            regulator-allowed-modes =

                <RPMH_REGULATOR_MODE_LPM

                 RPMH_REGULATOR_MODE_HPM>;

            regulator-allow-set-load;

        };

        lvs1 {

            regulator-min-microvolt = <1800000>;

            regulator-max-microvolt = <1800000>;

        };

    };

    pmi8998-rpmh-regulators {

        compatible = "qcom,pmi8998-rpmh-regulators";

        qcom,pmic-id = "b";

        bob {

            regulator-min-microvolt = <3312000>;

            regulator-max-microvolt = <3600000>;

            regulator-allowed-modes =

                <RPMH_REGULATOR_MODE_AUTO

                 RPMH_REGULATOR_MODE_HPM>;

            regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;

        };

    };

...

    description: Trusted Computing Group

  "^tcl,.*":

    description: Toby Churchill Ltd.

  "^tcs,.*":

    description: Shenzhen City Tang Cheng Technology Co., Ltd.

  "^tdo,.*":

    description: Shangai Top Display Optoelectronics Co., Ltd

  "^technexion,.*":

{

	struct regmap *regmap;

	struct regulator_config config = { 0 };

	int i, err;

	int i;

	bool vout_mode, ddr_sel;

	const struct bd957x_regulator_data *reg_data = &bd9576_regulators[0];

	unsigned int num_reg_data = ARRAY_SIZE(bd9576_regulators);

		break;

	default:

		dev_err(&pdev->dev, "Unsupported chip type\n");

		err = -EINVAL;

		goto err;

		return -EINVAL;

	}

	config.dev = pdev->dev.parent;

			dev_err(&pdev->dev,

				"failed to register %s regulator\n",

				desc->name);

			err = PTR_ERR(rdev);

			goto err;

			return PTR_ERR(rdev);

		}

		/*

		 * Clear the VOUT1 GPIO setting - rest of the regulators do not

		config.ena_gpiod = NULL;

	}

err:

	return err;

	return 0;

}

static const struct platform_device_id bd957x_pmic_id[] = {