Commit 4db07317 authored by Jonathan Lemon's avatar Jonathan Lemon Committed by David S. Miller
Browse files

docs: ABI: Document new timecard sysfs nodes.



Add documentation for the tod_correction, clock_status_drift,
and clock_status_offset nodes.

Signed-off-by: default avatarJonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e68462a0
Loading
Loading
Loading
Loading
+22 −0
Original line number Diff line number Diff line
@@ -63,6 +63,18 @@ Description: (RW) Contains the current synchronization source used by
		the PHC.  May be changed by writing one of the listed
		values from the available_clock_sources attribute set.

What:		/sys/class/timecard/ocpN/clock_status_drift
Date:		March 2022
Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
Description:	(RO) Contains the current drift value used by the firmware
		for internal disciplining of the atomic clock.

What:		/sys/class/timecard/ocpN/clock_status_offset
Date:		March 2022
Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
Description:	(RO) Contains the current offset value used by the firmware
		for internal disciplining of the atomic clock.

What:		/sys/class/timecard/ocpN/gnss_sync
Date:		September 2021
Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
@@ -126,6 +138,16 @@ Description: (RW) These attributes specify the direction of the signal
		The 10Mhz reference clock input is currently only valid
		on SMA1 and may not be combined with other destination sinks.

What:		/sys/class/timecard/ocpN/tod_correction
Date:		March 2022
Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
Description:	(RW) The incoming GNSS signal is in UTC time, and the NMEA
		format messages do not provide a TAI offset.  This sets the
		correction value for the incoming time.

		If UBX_LS is enabled, this should be 0, and the offset is
		taken from the UBX-NAV-TIMELS message.

What:		/sys/class/timecard/ocpN/ts_window_adjust
Date:		September 2021
Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>