Commit 4b67be99 authored by Stephen Hemminger's avatar Stephen Hemminger Committed by Jeff Garzik
Browse files

[PATCH] skge: pause mapping for fiber 



Do correct mapping of pause and duplex when using 1000BaseX fiber
versions of the board.

Signed-off-by: default avatarStephen Hemminger <shemminger@osdl.org>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent a1bc9b87

drivers/net/skge.c

+21 −17
Original line number Diff line number Diff line
@@ -197,8 +197,8 @@ static u32 skge_supported_modes(const struct skge_hw *hw) 
		else if (hw->chip_id == CHIP_ID_YUKON)

			supported &= ~SUPPORTED_1000baseT_Half;

	} else

		supported = SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE

			| SUPPORTED_Autoneg;

		supported = SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half

			| SUPPORTED_FIBRE | SUPPORTED_Autoneg;



	return supported;

}
@@ -1018,6 +1018,14 @@ static const u16 phy_pause_map[] = { 
	[FLOW_MODE_REM_SEND]  = PHY_AN_PAUSE_CAP | PHY_AN_PAUSE_ASYM,

};



/* special defines for FIBER (88E1011S only) */

static const u16 fiber_pause_map[] = {

	[FLOW_MODE_NONE]	= PHY_X_P_NO_PAUSE,

	[FLOW_MODE_LOC_SEND]	= PHY_X_P_ASYM_MD,

	[FLOW_MODE_SYMMETRIC]	= PHY_X_P_SYM_MD,

	[FLOW_MODE_REM_SEND]	= PHY_X_P_BOTH_MD,

};





/* Check status of Broadcom phy link */

static void bcom_check_link(struct skge_hw *hw, int port)
@@ -1207,17 +1215,7 @@ static void xm_phy_init(struct skge_port *skge) 
		if (skge->advertising & ADVERTISED_1000baseT_Full)

			ctrl |= PHY_X_AN_FD;



		switch(skge->flow_control) {

		case FLOW_MODE_NONE:

			ctrl |= PHY_X_P_NO_PAUSE;

			break;

		case FLOW_MODE_LOC_SEND:

			ctrl |= PHY_X_P_ASYM_MD;

			break;

		case FLOW_MODE_SYMMETRIC:

			ctrl |= PHY_X_P_BOTH_MD;

			break;

		}

		ctrl |= fiber_pause_map[skge->flow_control];



		xm_phy_write(hw, port, PHY_XMAC_AUNE_ADV, ctrl);
@@ -1796,11 +1794,17 @@ static void yukon_init(struct skge_hw *hw, int port) 
				adv |= PHY_M_AN_10_FD;

			if (skge->advertising & ADVERTISED_10baseT_Half)

				adv |= PHY_M_AN_10_HD;

		} else	/* special defines for FIBER (88E1011S only) */

			adv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD;



			/* Set Flow-control capabilities */

			adv |= phy_pause_map[skge->flow_control];

		} else {

			if (skge->advertising & ADVERTISED_1000baseT_Full)

				adv |= PHY_M_AN_1000X_AFD;

			if (skge->advertising & ADVERTISED_1000baseT_Half)

				adv |= PHY_M_AN_1000X_AHD;



			adv |= fiber_pause_map[skge->flow_control];

		}



		/* Restart Auto-negotiation */

		ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;