dt-bindings: gpio: Convert i.MX to json-schema

* Freescale i.MX/MXC GPIO controller

Required properties:

- compatible : Should be "fsl,<soc>-gpio"

- reg : Address and length of the register set for the device

- interrupts : Should be the port interrupt shared by all 32 pins, if

  one number.  If two numbers, the first one is the interrupt shared

  by low 16 pins and the second one is for high 16 pins.

- gpio-controller : Marks the device node as a gpio controller.

- #gpio-cells : Should be two.  The first cell is the pin number and

  the second cell is used to specify the gpio polarity:

      0 = active high

      1 = active low

- interrupt-controller: Marks the device node as an interrupt controller.

- #interrupt-cells : Should be 2.  The first cell is the GPIO number.

  The second cell bits[3:0] is used to specify trigger type and level flags:

      1 = low-to-high edge triggered.

      2 = high-to-low edge triggered.

      4 = active high level-sensitive.

      8 = active low level-sensitive.

Optional properties:

- clocks: the clock for clocking the GPIO silicon

Example:

gpio0: gpio@73f84000 {

	compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";

	reg = <0x73f84000 0x4000>;

	interrupts = <50 51>;

	gpio-controller;

	#gpio-cells = <2>;

	interrupt-controller;

	#interrupt-cells = <2>;

};

# SPDX-License-Identifier: GPL-2.0

%YAML 1.2

---

$id: http://devicetree.org/schemas/gpio/fsl-imx-gpio.yaml#

$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Freescale i.MX/MXC GPIO controller

maintainers:

  - Anson Huang <Anson.Huang@nxp.com>

properties:

  compatible:

    enum:

      - fsl,imx1-gpio

      - fsl,imx21-gpio

      - fsl,imx31-gpio

      - fsl,imx35-gpio

      - fsl,imx7d-gpio

  reg:

    maxItems: 1

  interrupts:

    description: |

      Should be the port interrupt shared by all 32 pins, if one number.

      If two numbers, the first one is the interrupt shared by low 16 pins

      and the second one is for high 16 pins.

    minItems: 1

    maxItems: 2

  interrupt-controller: true

  "#interrupt-cells":

    const: 2

  clocks:

    maxItems: 1

  "#gpio-cells":

    const: 2

  gpio-controller: true

required:

  - compatible

  - reg

  - interrupts

  - interrupt-controller

  - "#interrupt-cells"

  - "#gpio-cells"

  - gpio-controller

additionalProperties: false

examples:

  - |

    gpio0: gpio@73f84000 {

        compatible = "fsl,imx35-gpio";

        reg = <0x73f84000 0x4000>;

        interrupts = <50 51>;

        gpio-controller;

        #gpio-cells = <2>;

        interrupt-controller;

        #interrupt-cells = <2>;

    };

...