Unverified Commit 45ea8620 authored by Mark Brown's avatar Mark Brown
Browse files

Merge series "ASoC: Intel: bytcr_rt5651: few cleanups" from Andy Shevchenko...

Merge series "ASoC: Intel: bytcr_rt5651: few cleanups" from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:

The small set of cleanups against bytcr_rt5651 board file.

In v2:
- added commit message to patch 2 (Joe, Pierre)
- added cover letter (Pierre)
- added Hans to Cc list (Hans)

Andy Shevchenko (4):
  ASoC: Intel: bytcr_rt5651: Get platform data via dev_get_platdata()
  ASoC: Intel: bytcr_rt5651: Use temporary variable for struct device
  ASoC: Intel: bytcr_rt5651: use devm_clk_get_optional() for mclk
  ASoC: Intel: bytcr_rt5651: Utilize dev_err_probe() to avoid log
    saturation

 sound/soc/intel/boards/bytcr_rt5651.c | 118 +++++++++++---------------
 1 file changed, 50 insertions(+), 68 deletions(-)

--
2.33.0
parents ee233500 45c5dc45
Loading
Loading
Loading
Loading
+50 −68
Original line number Diff line number Diff line
@@ -188,14 +188,11 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
	}

	if (SND_SOC_DAPM_EVENT_ON(event)) {
		if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
		ret = clk_prepare_enable(priv->mclk);
		if (ret < 0) {
				dev_err(card->dev,
					"could not configure MCLK state");
			dev_err(card->dev, "could not configure MCLK state");
			return ret;
		}
		}
		ret = byt_rt5651_prepare_and_enable_pll1(codec_dai, 48000, 50);
	} else {
		/*
@@ -207,7 +204,6 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
					     48000 * 512,
					     SND_SOC_CLOCK_IN);
		if (!ret)
			if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN)
			clk_disable_unprepare(priv->mclk);
	}

@@ -629,15 +625,12 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
		return ret;
	}

	if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
	/*
		 * The firmware might enable the clock at
		 * boot (this information may or may not
		 * be reflected in the enable clock register).
		 * To change the rate we must disable the clock
		 * first to cover these cases. Due to common
		 * clock framework restrictions that do not allow
		 * to disable a clock that has not been enabled,
	 * The firmware might enable the clock at boot (this information
	 * may or may not be reflected in the enable clock register).
	 * To change the rate we must disable the clock first to cover
	 * these cases. Due to common clock framework restrictions that
	 * do not allow to disable a clock that has not been enabled,
	 * we need to enable the clock first.
	 */
	ret = clk_prepare_enable(priv->mclk);
@@ -651,7 +644,6 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)

	if (ret)
		dev_err(card->dev, "unable to set MCLK rate\n");
	}

	report = 0;
	if (BYT_RT5651_JDSRC(byt_rt5651_quirk))
@@ -894,9 +886,10 @@ struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */

static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	static const char * const mic_name[] = { "dmic", "in1", "in2", "in12" };
	struct snd_soc_acpi_mach *mach = dev_get_platdata(dev);
	struct byt_rt5651_private *priv;
	struct snd_soc_acpi_mach *mach;
	const char *platform_name;
	struct acpi_device *adev;
	struct device *codec_dev;
@@ -906,14 +899,12 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
	int dai_index = 0;
	int i;

	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;

	/* register the soc card */
	byt_rt5651_card.dev = &pdev->dev;

	mach = byt_rt5651_card.dev->platform_data;
	byt_rt5651_card.dev = dev;
	snd_soc_card_set_drvdata(&byt_rt5651_card, priv);

	/* fix index of codec dai */
@@ -933,7 +924,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
		put_device(&adev->dev);
		byt_rt5651_dais[dai_index].codecs->name = byt_rt5651_codec_name;
	} else {
		dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id);
		dev_err(dev, "Error cannot find '%s' dev\n", mach->id);
		return -ENXIO;
	}

@@ -981,13 +972,13 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
							       &pkg_ctx);
		if (pkg_found) {
			if (chan_package.aif_value == 1) {
				dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n");
				dev_info(dev, "BIOS Routing: AIF1 connected\n");
				byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF1;
			} else  if (chan_package.aif_value == 2) {
				dev_info(&pdev->dev, "BIOS Routing: AIF2 connected\n");
				dev_info(dev, "BIOS Routing: AIF2 connected\n");
				byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2;
			} else {
				dev_info(&pdev->dev, "BIOS Routing isn't valid, ignored\n");
				dev_info(dev, "BIOS Routing isn't valid, ignored\n");
				pkg_found = false;
			}
		}
@@ -1002,7 +993,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
	dmi_check_system(byt_rt5651_quirk_table);

	if (quirk_override != -1) {
		dev_info(&pdev->dev, "Overriding quirk 0x%lx => 0x%x\n",
		dev_info(dev, "Overriding quirk 0x%lx => 0x%x\n",
			 byt_rt5651_quirk, quirk_override);
		byt_rt5651_quirk = quirk_override;
	}
@@ -1018,8 +1009,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)

	if (byt_rt5651_gpios) {
		devm_acpi_dev_add_driver_gpios(codec_dev, byt_rt5651_gpios);
		priv->ext_amp_gpio = devm_fwnode_gpiod_get(&pdev->dev,
							   codec_dev->fwnode,
		priv->ext_amp_gpio = devm_fwnode_gpiod_get(dev, codec_dev->fwnode,
							   "ext-amp-enable",
							   GPIOD_OUT_LOW,
							   "speaker-amp");
@@ -1030,15 +1020,13 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
				priv->ext_amp_gpio = NULL;
				break;
			default:
				dev_err(&pdev->dev, "Failed to get ext-amp-enable GPIO: %d\n",
					ret_val);
				dev_err(dev, "Failed to get ext-amp-enable GPIO: %d\n", ret_val);
				fallthrough;
			case -EPROBE_DEFER:
				goto err;
			}
		}
		priv->hp_detect = devm_fwnode_gpiod_get(&pdev->dev,
							codec_dev->fwnode,
		priv->hp_detect = devm_fwnode_gpiod_get(dev, codec_dev->fwnode,
							"hp-detect",
							GPIOD_IN,
							"hp-detect");
@@ -1049,8 +1037,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
				priv->hp_detect = NULL;
				break;
			default:
				dev_err(&pdev->dev, "Failed to get hp-detect GPIO: %d\n",
					ret_val);
				dev_err(dev, "Failed to get hp-detect GPIO: %d\n", ret_val);
				fallthrough;
			case -EPROBE_DEFER:
				goto err;
@@ -1058,7 +1045,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
		}
	}

	log_quirks(&pdev->dev);
	log_quirks(dev);

	if ((byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) ||
	    (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2))
@@ -1069,22 +1056,19 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
		byt_rt5651_dais[dai_index].cpus->dai_name = "ssp0-port";

	if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
		priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
		priv->mclk = devm_clk_get_optional(dev, "pmc_plt_clk_3");
		if (IS_ERR(priv->mclk)) {
			ret_val = PTR_ERR(priv->mclk);
			dev_err(&pdev->dev,
				"Failed to get MCLK from pmc_plt_clk_3: %d\n",
				ret_val);
			ret_val = dev_err_probe(dev, PTR_ERR(priv->mclk),
						"Failed to get MCLK from pmc_plt_clk_3\n");
			goto err;
		}
		/*
			 * Fall back to bit clock usage for -ENOENT (clock not
			 * available likely due to missing dependencies), bail
			 * for all other errors, including -EPROBE_DEFER
		 * Fall back to bit clock usage when clock is not
		 * available likely due to missing dependencies.
		 */
			if (ret_val != -ENOENT)
				goto err;
		if (!priv->mclk)
			byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN;
	}
	}

	snprintf(byt_rt5651_components, sizeof(byt_rt5651_components),
		 "cfg-spk:%s cfg-mic:%s%s",
@@ -1112,7 +1096,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
	if (ret_val)
		goto err;

	sof_parent = snd_soc_acpi_sof_parent(&pdev->dev);
	sof_parent = snd_soc_acpi_sof_parent(dev);

	/* set card and driver name */
	if (sof_parent) {
@@ -1125,13 +1109,11 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)

	/* set pm ops */
	if (sof_parent)
		pdev->dev.driver->pm = &snd_soc_pm_ops;

	ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5651_card);
		dev->driver->pm = &snd_soc_pm_ops;

	ret_val = devm_snd_soc_register_card(dev, &byt_rt5651_card);
	if (ret_val) {
		dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n",
			ret_val);
		dev_err(dev, "devm_snd_soc_register_card failed %d\n", ret_val);
		goto err;
	}
	platform_set_drvdata(pdev, &byt_rt5651_card);