Commit 42be2c98 authored by Linus Walleij's avatar Linus Walleij
Browse files

ARM: ixp4xx: Delete the D-Link DSM-G600 boardfiles 



This board is replaced with the corresponding device tree.

Cc: Michael-Luke Jones <mlj28@cam.ac.uk>
Cc: Rod Whitby <rod@whitby.id.au>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Michael Westerhof <mwester@dls.net>
Cc: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent ee2f116b

arch/arm/mach-ixp4xx/Kconfig

+0 −9
Original line number Diff line number Diff line
@@ -110,15 +110,6 @@ config ARCH_PRPMC1100 
	  PrPCM1100 Processor Mezanine Module. For more information on

	  this platform, see <file:Documentation/arm/ixp4xx.rst>.



config MACH_DSMG600

	bool

	prompt "D-Link DSM-G600 RevA"

	depends on IXP4XX_PCI_LEGACY

	help

	  Say 'Y' here if you want your kernel to support D-Link's

	  DSM-G600 RevA device. For more information on this platform,

	  see http://www.nslu2-linux.org/wiki/DSMG600/HomePage



config	ARCH_IXDP4XX

	bool

	depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435

arch/arm/mach-ixp4xx/Makefile

+0 −2
Original line number Diff line number Diff line
@@ -15,7 +15,6 @@ obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o 
obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o

obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o

obj-pci-$(CONFIG_MACH_MICCPT)		+= miccpt-pci.o

obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o

obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o

obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o

obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
@@ -31,7 +30,6 @@ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o 
obj-$(CONFIG_MACH_DEVIXP)	+= omixp-setup.o

obj-$(CONFIG_MACH_MICCPT)	+= omixp-setup.o

obj-$(CONFIG_MACH_MIC256)	+= omixp-setup.o

obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o

obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o

obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o

obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o

arch/arm/mach-ixp4xx/dsmg600-pci.c

deleted100644 → 0
+0 −77
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0-only

/*

 * DSM-G600 board-level PCI initialization

 *

 * Copyright (C) 2006 Tower Technologies

 * Author: Alessandro Zummo <a.zummo@towertech.it>

 *

 * based on ixdp425-pci.c:

 *	Copyright (C) 2002 Intel Corporation.

 *	Copyright (C) 2003-2004 MontaVista Software, Inc.

 *

 * Maintainer: http://www.nslu2-linux.org/

 */



#include <linux/pci.h>

#include <linux/init.h>

#include <linux/irq.h>

#include <asm/mach/pci.h>

#include <asm/mach-types.h>



#include "irqs.h"



#define MAX_DEV		4

#define IRQ_LINES	3



/* PCI controller GPIO to IRQ pin mappings */

#define INTA		11

#define INTB		10

#define INTC		9

#define INTD		8

#define INTE		7

#define INTF		6



void __init dsmg600_pci_preinit(void)

{

	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);

	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);

	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);

	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);

	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW);

	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTF), IRQ_TYPE_LEVEL_LOW);

	ixp4xx_pci_preinit();

}



static int __init dsmg600_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)

{

	static int pci_irq_table[MAX_DEV][IRQ_LINES] = {

		{ IXP4XX_GPIO_IRQ(INTE), -1, -1 },

		{ IXP4XX_GPIO_IRQ(INTA), -1, -1 },

		{ IXP4XX_GPIO_IRQ(INTB), IXP4XX_GPIO_IRQ(INTC),

		  IXP4XX_GPIO_IRQ(INTD) },

		{ IXP4XX_GPIO_IRQ(INTF), -1, -1 },

	};



	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)

		return pci_irq_table[slot - 1][pin - 1];



	return -1;

}



struct hw_pci __initdata dsmg600_pci = {

	.nr_controllers = 1,

	.ops		= &ixp4xx_ops,

	.preinit	= dsmg600_pci_preinit,

	.setup		= ixp4xx_setup,

	.map_irq	= dsmg600_map_irq,

};



int __init dsmg600_pci_init(void)

{

	if (machine_is_dsmg600())

		pci_common_init(&dsmg600_pci);



	return 0;

}



subsys_initcall(dsmg600_pci_init);

arch/arm/mach-ixp4xx/dsmg600-setup.c

deleted100644 → 0
+0 −304
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

/*

 * DSM-G600 board-setup

 *

 * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>

 * Copyright (C) 2006 Tower Technologies

 *

 * based on ixdp425-setup.c:

 *      Copyright (C) 2003-2004 MontaVista Software, Inc.

 * based on nslu2-power.c:

 *	Copyright (C) 2005 Tower Technologies

 * based on nslu2-io.c:

 *	Copyright (C) 2004 Karen Spearel

 *

 * Author: Alessandro Zummo <a.zummo@towertech.it>

 * Author: Michael Westerhof <mwester@dls.net>

 * Author: Rod Whitby <rod@whitby.id.au>

 * Maintainers: http://www.nslu2-linux.org/

 */

#include <linux/gpio.h>

#include <linux/irq.h>

#include <linux/jiffies.h>

#include <linux/timer.h>

#include <linux/serial.h>

#include <linux/serial_8250.h>

#include <linux/leds.h>

#include <linux/reboot.h>

#include <linux/i2c.h>

#include <linux/gpio/machine.h>



#include <mach/hardware.h>



#include <asm/mach-types.h>

#include <asm/mach/arch.h>

#include <asm/mach/flash.h>

#include <asm/mach/time.h>



#include "irqs.h"



#define DSMG600_SDA_PIN		5

#define DSMG600_SCL_PIN		4



/* DSM-G600 Timer Setting */

#define DSMG600_FREQ		66000000



/* Buttons */

#define DSMG600_PB_GPIO		15	/* power button */

#define DSMG600_RB_GPIO		3	/* reset button */



/* Power control */

#define DSMG600_PO_GPIO		2	/* power off */



/* LEDs */

#define DSMG600_LED_PWR_GPIO	0

#define DSMG600_LED_WLAN_GPIO	14



static struct flash_platform_data dsmg600_flash_data = {

	.map_name		= "cfi_probe",

	.width			= 2,

};



static struct resource dsmg600_flash_resource = {

	.flags			= IORESOURCE_MEM,

};



static struct platform_device dsmg600_flash = {

	.name			= "IXP4XX-Flash",

	.id			= 0,

	.dev.platform_data	= &dsmg600_flash_data,

	.num_resources		= 1,

	.resource		= &dsmg600_flash_resource,

};



static struct gpiod_lookup_table dsmg600_i2c_gpiod_table = {

	.dev_id		= "i2c-gpio.0",

	.table		= {

		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SDA_PIN,

				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),

		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SCL_PIN,

				NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),

	},

};



static struct platform_device dsmg600_i2c_gpio = {

	.name			= "i2c-gpio",

	.id			= 0,

	.dev	 = {

		.platform_data	= NULL,

	},

};



static struct i2c_board_info __initdata dsmg600_i2c_board_info [] = {

	{

		I2C_BOARD_INFO("pcf8563", 0x51),

	},

};



static struct gpio_led dsmg600_led_pins[] = {

	{

		.name		= "dsmg600:green:power",

		.gpio		= DSMG600_LED_PWR_GPIO,

	},

	{

		.name		= "dsmg600:green:wlan",

		.gpio		= DSMG600_LED_WLAN_GPIO,

		.active_low	= true,

	},

};



static struct gpio_led_platform_data dsmg600_led_data = {

	.num_leds		= ARRAY_SIZE(dsmg600_led_pins),

	.leds			= dsmg600_led_pins,

};



static struct platform_device dsmg600_leds = {

	.name			= "leds-gpio",

	.id			= -1,

	.dev.platform_data	= &dsmg600_led_data,

};



static struct resource dsmg600_uart_resources[] = {

	{

		.start		= IXP4XX_UART1_BASE_PHYS,

		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,

		.flags		= IORESOURCE_MEM,

	},

	{

		.start		= IXP4XX_UART2_BASE_PHYS,

		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,

		.flags		= IORESOURCE_MEM,

	}

};



static struct plat_serial8250_port dsmg600_uart_data[] = {

	{

		.mapbase	= IXP4XX_UART1_BASE_PHYS,

		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,

		.irq		= IRQ_IXP4XX_UART1,

		.flags		= UPF_BOOT_AUTOCONF,

		.iotype		= UPIO_MEM,

		.regshift	= 2,

		.uartclk	= IXP4XX_UART_XTAL,

	},

	{

		.mapbase	= IXP4XX_UART2_BASE_PHYS,

		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,

		.irq		= IRQ_IXP4XX_UART2,

		.flags		= UPF_BOOT_AUTOCONF,

		.iotype		= UPIO_MEM,

		.regshift	= 2,

		.uartclk	= IXP4XX_UART_XTAL,

	},

	{ }

};



static struct platform_device dsmg600_uart = {

	.name			= "serial8250",

	.id			= PLAT8250_DEV_PLATFORM,

	.dev.platform_data	= dsmg600_uart_data,

	.num_resources		= ARRAY_SIZE(dsmg600_uart_resources),

	.resource		= dsmg600_uart_resources,

};



static struct platform_device *dsmg600_devices[] __initdata = {

	&dsmg600_i2c_gpio,

	&dsmg600_flash,

	&dsmg600_leds,

};



static void dsmg600_power_off(void)

{

	/* enable the pwr cntl and drive it high */

	gpio_direction_output(DSMG600_PO_GPIO, 1);

}



/* This is used to make sure the power-button pusher is serious.  The button

 * must be held until the value of this counter reaches zero.

 */

static int power_button_countdown;



/* Must hold the button down for at least this many counts to be processed */

#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */



static void dsmg600_power_handler(struct timer_list *unused);

static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler);



static void dsmg600_power_handler(struct timer_list *unused)

{

	/* This routine is called twice per second to check the

	 * state of the power button.

	 */



	if (gpio_get_value(DSMG600_PB_GPIO)) {



		/* IO Pin is 1 (button pushed) */

		if (power_button_countdown > 0)

			power_button_countdown--;



	} else {



		/* Done on button release, to allow for auto-power-on mods. */

		if (power_button_countdown == 0) {

			/* Signal init to do the ctrlaltdel action,

			 * this will bypass init if it hasn't started

			 * and do a kernel_restart.

			 */

			ctrl_alt_del();



			/* Change the state of the power LED to "blink" */

			gpio_set_value(DSMG600_LED_PWR_GPIO, 0);

		} else {

			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;

		}

	}



	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));

}



static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)

{

	/* This is the paper-clip reset, it shuts the machine down directly. */

	machine_power_off();



	return IRQ_HANDLED;

}



static void __init dsmg600_timer_init(void)

{

    /* The xtal on this machine is non-standard. */

    ixp4xx_timer_freq = DSMG600_FREQ;



    /* Call standard timer_init function. */

    ixp4xx_timer_init();

}



static int __init dsmg600_gpio_init(void)

{

	if (!machine_is_dsmg600())

		return 0;



	gpio_request(DSMG600_RB_GPIO, "reset button");

	if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,

		IRQF_TRIGGER_LOW, "DSM-G600 reset button", NULL) < 0) {



		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",

			gpio_to_irq(DSMG600_RB_GPIO));

	}



	/*

	 * The power button on the D-Link DSM-G600 is on GPIO 15, but

	 * it cannot handle interrupts on that GPIO line.  So we'll

	 * have to poll it with a kernel timer.

	 */



	/* Make sure that the power button GPIO is set up as an input */

	gpio_request(DSMG600_PB_GPIO, "power button");

	gpio_direction_input(DSMG600_PB_GPIO);

	/* Request poweroff GPIO line */

	gpio_request(DSMG600_PO_GPIO, "power off button");



	/* Set the initial value for the power button IRQ handler */

	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;



	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));

	return 0;

}

device_initcall(dsmg600_gpio_init);



static void __init dsmg600_init(void)

{

	ixp4xx_sys_init();



	dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);

	dsmg600_flash_resource.end =

		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;



	gpiod_add_lookup_table(&dsmg600_i2c_gpiod_table);

	i2c_register_board_info(0, dsmg600_i2c_board_info,

				ARRAY_SIZE(dsmg600_i2c_board_info));



	/* The UART is required on the DSM-G600 (Redboot cannot use the

	 * NIC) -- do it here so that it does *not* get removed if

	 * platform_add_devices fails!

         */

        (void)platform_device_register(&dsmg600_uart);



	platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));



	pm_power_off = dsmg600_power_off;

}



MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")

	/* Maintainer: www.nslu2-linux.org */

	.atag_offset	= 0x100,

	.map_io		= ixp4xx_map_io,

	.init_early	= ixp4xx_init_early,

	.init_irq	= ixp4xx_init_irq,

	.init_time	= dsmg600_timer_init,

	.init_machine	= dsmg600_init,

#if defined(CONFIG_PCI)

	.dma_zone_size	= SZ_64M,

#endif

	.restart	= ixp4xx_restart,

MACHINE_END