Commit 4191c340 authored by Lothar Waßmann's avatar Lothar Waßmann Committed by Shawn Guo
Browse files

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 



Convert mx23/mx28 dts files to use the padconfig defintions from
mxs-pinfunc.h.

Signed-off-by: default avatarLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent bc3875f1

arch/arm/boot/dts/imx23-evk.dts

+3 −3
Original line number Diff line number Diff line
@@ -50,9 +50,9 @@ 
						MX23_PAD_PWM4__GPIO_1_30

						MX23_PAD_SSP1_DETECT__SSP1_DETECT

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <0>;

					fsl,drive-strength = <MXS_DRIVE_4mA>;

					fsl,voltage = <MXS_VOLTAGE_HIGH>;

					fsl,pull-up = <MXS_PULL_DISABLE>;

				};

			};

arch/arm/boot/dts/imx23-olinuxino.dts

+6 −6
Original line number Diff line number Diff line
@@ -42,9 +42,9 @@ 
					fsl,pinmux-ids = <

						MX23_PAD_GPMI_ALE__GPIO_0_17

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <0>;

					fsl,drive-strength = <MXS_DRIVE_4mA>;

					fsl,voltage = <MXS_VOLTAGE_HIGH>;

					fsl,pull-up = <MXS_PULL_DISABLE>;

				};



				led_pin_gpio2_1: led_gpio2_1@0 {
@@ -52,9 +52,9 @@ 
					fsl,pinmux-ids = <

						MX23_PAD_SSP1_DETECT__GPIO_2_1

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <0>;

					fsl,drive-strength = <MXS_DRIVE_4mA>;

					fsl,voltage = <MXS_VOLTAGE_HIGH>;

					fsl,pull-up = <MXS_PULL_DISABLE>;

				};

			};

arch/arm/boot/dts/imx23-stmp378x_devb.dts

+3 −3
Original line number Diff line number Diff line
@@ -42,9 +42,9 @@ 
						MX23_PAD_PWM3__GPIO_1_29

						MX23_PAD_PWM4__GPIO_1_30

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <0>;

					fsl,drive-strength = <MXS_DRIVE_4mA>;

					fsl,voltage = <MXS_VOLTAGE_HIGH>;

					fsl,pull-up = <MXS_PULL_DISABLE>;

				};

			};

		};

arch/arm/boot/dts/imx23.dtsi

+29 −29
Original line number Diff line number Diff line
@@ -141,9 +141,9 @@ 
						MX23_PAD_PWM0__DUART_RX

						MX23_PAD_PWM1__DUART_TX

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <0>;

					fsl,drive-strength = <MXS_DRIVE_4mA>;

					fsl,voltage = <MXS_VOLTAGE_HIGH>;

					fsl,pull-up = <MXS_PULL_DISABLE>;

				};



				auart0_pins_a: auart0@0 {
@@ -154,9 +154,9 @@ 
						MX23_PAD_AUART1_CTS__AUART1_CTS

						MX23_PAD_AUART1_RTS__AUART1_RTS

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <0>;

					fsl,drive-strength = <MXS_DRIVE_4mA>;

					fsl,voltage = <MXS_VOLTAGE_HIGH>;

					fsl,pull-up = <MXS_PULL_DISABLE>;

				};



				auart0_2pins_a: auart0-2pins@0 {
@@ -165,9 +165,9 @@ 
						MX23_PAD_I2C_SCL__AUART1_TX

						MX23_PAD_I2C_SDA__AUART1_RX

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <0>;

					fsl,drive-strength = <MXS_DRIVE_4mA>;

					fsl,voltage = <MXS_VOLTAGE_HIGH>;

					fsl,pull-up = <MXS_PULL_DISABLE>;

				};



				gpmi_pins_a: gpmi-nand@0 {
@@ -191,9 +191,9 @@ 
						MX23_PAD_GPMI_CE1N__GPMI_CE1N

						MX23_PAD_GPMI_CE0N__GPMI_CE0N

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <0>;

					fsl,drive-strength = <MXS_DRIVE_4mA>;

					fsl,voltage = <MXS_VOLTAGE_HIGH>;

					fsl,pull-up = <MXS_PULL_DISABLE>;

				};



				gpmi_pins_fixup: gpmi-pins-fixup {
@@ -202,7 +202,7 @@ 
						MX23_PAD_GPMI_WRN__GPMI_WRN

						MX23_PAD_GPMI_RDN__GPMI_RDN

					>;

					fsl,drive-strength = <2>;

					fsl,drive-strength = <MXS_DRIVE_12mA>;

				};



				mmc0_4bit_pins_a: mmc0-4bit@0 {
@@ -215,9 +215,9 @@ 
						MX23_PAD_SSP1_CMD__SSP1_CMD

						MX23_PAD_SSP1_SCK__SSP1_SCK

					>;

					fsl,drive-strength = <1>;

					fsl,voltage = <1>;

					fsl,pull-up = <1>;

					fsl,drive-strength = <MXS_DRIVE_8mA>;

					fsl,voltage = <MXS_VOLTAGE_HIGH>;

					fsl,pull-up = <MXS_PULL_ENABLE>;

				};



				mmc0_8bit_pins_a: mmc0-8bit@0 {
@@ -235,9 +235,9 @@ 
						MX23_PAD_SSP1_DETECT__SSP1_DETECT

						MX23_PAD_SSP1_SCK__SSP1_SCK

					>;

					fsl,drive-strength = <1>;

					fsl,voltage = <1>;

					fsl,pull-up = <1>;

					fsl,drive-strength = <MXS_DRIVE_8mA>;

					fsl,voltage = <MXS_VOLTAGE_HIGH>;

					fsl,pull-up = <MXS_PULL_ENABLE>;

				};



				mmc0_pins_fixup: mmc0-pins-fixup {
@@ -245,7 +245,7 @@ 
						MX23_PAD_SSP1_DETECT__SSP1_DETECT

						MX23_PAD_SSP1_SCK__SSP1_SCK

					>;

					fsl,pull-up = <0>;

					fsl,pull-up = <MXS_PULL_DISABLE>;

				};



				pwm2_pins_a: pwm2@0 {
@@ -253,9 +253,9 @@ 
					fsl,pinmux-ids = <

						MX23_PAD_PWM2__PWM2

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <0>;

					fsl,drive-strength = <MXS_DRIVE_4mA>;

					fsl,voltage = <MXS_VOLTAGE_HIGH>;

					fsl,pull-up = <MXS_PULL_DISABLE>;

				};



				lcdif_24bit_pins_a: lcdif-24bit@0 {
@@ -290,9 +290,9 @@ 
						MX23_PAD_LCD_HSYNC__LCD_HSYNC

						MX23_PAD_LCD_VSYNC__LCD_VSYNC

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <0>;

					fsl,drive-strength = <MXS_DRIVE_4mA>;

					fsl,voltage = <MXS_VOLTAGE_HIGH>;

					fsl,pull-up = <MXS_PULL_DISABLE>;

				};



				spi2_pins_a: spi2@0 {
@@ -303,9 +303,9 @@ 
						MX23_PAD_GPMI_D00__SSP2_DATA0

						MX23_PAD_GPMI_D03__SSP2_DATA3

					>;

					fsl,drive-strength = <1>;

					fsl,voltage = <1>;

					fsl,pull-up = <1>;

					fsl,drive-strength = <MXS_DRIVE_8mA>;

					fsl,voltage = <MXS_VOLTAGE_HIGH>;

					fsl,pull-up = <MXS_PULL_ENABLE>;

				};

			};

arch/arm/boot/dts/imx28-apf28dev.dts

+6 −6
Original line number Diff line number Diff line
@@ -49,9 +49,9 @@ 
						MX28_PAD_LCD_D21__GPIO_1_21

						MX28_PAD_LCD_D22__GPIO_1_22

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <0>;

					fsl,drive-strength = <MXS_DRIVE_4mA>;

					fsl,voltage = <MXS_VOLTAGE_HIGH>;

					fsl,pull-up = <MXS_PULL_DISABLE>;

				};



				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
@@ -62,9 +62,9 @@ 
						MX28_PAD_LCD_RS__LCD_DOTCLK

						MX28_PAD_LCD_CS__LCD_ENABLE

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <0>;

					fsl,drive-strength = <MXS_DRIVE_4mA>;

					fsl,voltage = <MXS_VOLTAGE_HIGH>;

					fsl,pull-up = <MXS_PULL_DISABLE>;

				};

			};