Loading drivers/scsi/ata_piix.c +34 −2 Original line number Diff line number Diff line Loading @@ -123,7 +123,8 @@ enum { ich6_sata = 4, ich6_sata_ahci = 5, ich6m_sata_ahci = 6, ich8_sata_ahci = 7, ich7m_sata_ahci = 7, ich8_sata_ahci = 8, /* constants for mapping table */ P0 = 0, /* port 0 */ Loading Loading @@ -188,7 +189,7 @@ static const struct pci_device_id piix_pci_tbl[] = { /* 82801GB/GR/GH (ICH7, identical to ICH6) */ { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, /* 2801GBM/GHM (ICH7M, identical to ICH6M) */ { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7m_sata_ahci }, /* Enterprise Southbridge 2 (where's the datasheet?) */ { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, /* SATA Controller 1 IDE (ICH8, no datasheet yet) */ Loading Loading @@ -336,6 +337,24 @@ static const struct piix_map_db ich6m_map_db = { }, }; static const struct piix_map_db ich7m_map_db = { .mask = 0x3, .port_enable = 0x5, .present_shift = 4, /* Map 01b isn't specified in the doc but some notebooks use * it anyway. ATM, the only case spotted carries subsystem ID * 1025:0107. This is the only difference from ich6m. */ .map = { /* PM PS SM SS MAP */ { P0, P2, RV, RV }, /* 00b */ { IDE, IDE, P1, P3 }, /* 01b */ { P0, P2, IDE, IDE }, /* 10b */ { RV, RV, RV, RV }, }, }; static const struct piix_map_db ich8_map_db = { .mask = 0x3, .port_enable = 0x3, Loading @@ -355,6 +374,7 @@ static const struct piix_map_db *piix_map_db_table[] = { [ich6_sata] = &ich6_map_db, [ich6_sata_ahci] = &ich6_map_db, [ich6m_sata_ahci] = &ich6m_map_db, [ich7m_sata_ahci] = &ich7m_map_db, [ich8_sata_ahci] = &ich8_map_db, }; Loading Loading @@ -444,6 +464,18 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, /* ich7m_sata_ahci */ { .sht = &piix_sht, .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, }, /* ich8_sata_ahci */ { .sht = &piix_sht, Loading drivers/scsi/sata_mv.c +1 −2 Original line number Diff line number Diff line Loading @@ -1961,8 +1961,7 @@ static void __mv_phy_reset(struct ata_port *ap, int can_sleep) timeout = jiffies + msecs_to_jiffies(200); do { sata_scr_read(ap, SCR_STATUS, &sstatus); sstatus &= 0x3; if ((sstatus == 3) || (sstatus == 0)) if (((sstatus & 0x3) == 3) || ((sstatus & 0x3) == 0)) break; __msleep(1, can_sleep); Loading Loading
drivers/scsi/ata_piix.c +34 −2 Original line number Diff line number Diff line Loading @@ -123,7 +123,8 @@ enum { ich6_sata = 4, ich6_sata_ahci = 5, ich6m_sata_ahci = 6, ich8_sata_ahci = 7, ich7m_sata_ahci = 7, ich8_sata_ahci = 8, /* constants for mapping table */ P0 = 0, /* port 0 */ Loading Loading @@ -188,7 +189,7 @@ static const struct pci_device_id piix_pci_tbl[] = { /* 82801GB/GR/GH (ICH7, identical to ICH6) */ { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, /* 2801GBM/GHM (ICH7M, identical to ICH6M) */ { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7m_sata_ahci }, /* Enterprise Southbridge 2 (where's the datasheet?) */ { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, /* SATA Controller 1 IDE (ICH8, no datasheet yet) */ Loading Loading @@ -336,6 +337,24 @@ static const struct piix_map_db ich6m_map_db = { }, }; static const struct piix_map_db ich7m_map_db = { .mask = 0x3, .port_enable = 0x5, .present_shift = 4, /* Map 01b isn't specified in the doc but some notebooks use * it anyway. ATM, the only case spotted carries subsystem ID * 1025:0107. This is the only difference from ich6m. */ .map = { /* PM PS SM SS MAP */ { P0, P2, RV, RV }, /* 00b */ { IDE, IDE, P1, P3 }, /* 01b */ { P0, P2, IDE, IDE }, /* 10b */ { RV, RV, RV, RV }, }, }; static const struct piix_map_db ich8_map_db = { .mask = 0x3, .port_enable = 0x3, Loading @@ -355,6 +374,7 @@ static const struct piix_map_db *piix_map_db_table[] = { [ich6_sata] = &ich6_map_db, [ich6_sata_ahci] = &ich6_map_db, [ich6m_sata_ahci] = &ich6m_map_db, [ich7m_sata_ahci] = &ich7m_map_db, [ich8_sata_ahci] = &ich8_map_db, }; Loading Loading @@ -444,6 +464,18 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, /* ich7m_sata_ahci */ { .sht = &piix_sht, .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, }, /* ich8_sata_ahci */ { .sht = &piix_sht, Loading
drivers/scsi/sata_mv.c +1 −2 Original line number Diff line number Diff line Loading @@ -1961,8 +1961,7 @@ static void __mv_phy_reset(struct ata_port *ap, int can_sleep) timeout = jiffies + msecs_to_jiffies(200); do { sata_scr_read(ap, SCR_STATUS, &sstatus); sstatus &= 0x3; if ((sstatus == 3) || (sstatus == 0)) if (((sstatus & 0x3) == 3) || ((sstatus & 0x3) == 0)) break; __msleep(1, can_sleep); Loading