Commit 39e0ce6c authored by Loic Poulain's avatar Loic Poulain Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes 



Add cci device to msm8916.dtsi.
Add default 96boards camera node for db410c (apq8016-sbc).

Signed-off-by: default avatarLoic Poulain <loic.poulain@linaro.org>
Signed-off-by: default avatarRobert Foss <robert.foss@linaro.org>
Reviewed-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200324155843.10719-3-robert.foss@linaro.org


Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 1c51a4ab

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi

+76 −0
Original line number Original line Diff line number Diff line
@@ -51,6 +51,30 @@ 
		stdout-path = "serial0";

		stdout-path = "serial0";

	};

	};





	camera_vdddo_1v8: camera_vdddo_1v8 {

		compatible = "regulator-fixed";

		regulator-name = "camera_vdddo";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

		regulator-always-on;

	};



	camera_vdda_2v8: camera_vdda_2v8 {

		compatible = "regulator-fixed";

		regulator-name = "camera_vdda";

		regulator-min-microvolt = <2800000>;

		regulator-max-microvolt = <2800000>;

		regulator-always-on;

	};



	camera_vddd_1v5: camera_vddd_1v5 {

		compatible = "regulator-fixed";

		regulator-name = "camera_vddd";

		regulator-min-microvolt = <1500000>;

		regulator-max-microvolt = <1500000>;

		regulator-always-on;

	};



	reserved-memory {

	reserved-memory {

		ramoops@bff00000{

		ramoops@bff00000{

			compatible = "ramoops";

			compatible = "ramoops";
@@ -538,6 +562,58 @@ 
	};

	};

};

};





&camss {

	status = "ok";

	ports {

		#address-cells = <1>;

		#size-cells = <0>;

		port@0 {

			reg = <0>;

			csiphy0_ep: endpoint {

				clock-lanes = <1>;

				data-lanes = <0 2>;

				remote-endpoint = <&ov5640_ep>;

				status = "okay";

			};

		};

	};

};



&cci {

	status = "ok";

};



&cci_i2c0 {

	camera_rear@3b {

		compatible = "ovti,ov5640";

		reg = <0x3b>;



		enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;

		reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;

		pinctrl-names = "default";

		pinctrl-0 = <&camera_rear_default>;



		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;

		clock-names = "xclk";

		clock-frequency = <23880000>;



		vdddo-supply = <&camera_vdddo_1v8>;

		vdda-supply = <&camera_vdda_2v8>;

		vddd-supply = <&camera_vddd_1v5>;



		/* No camera mezzanine by default */

		status = "disabled";



		port {

			ov5640_ep: endpoint {

				clock-lanes = <1>;

				data-lanes = <0 2>;

				remote-endpoint = <&csiphy0_ep>;

			};

		};

	};

};



&spmi_bus {

&spmi_bus {

	pm8916_0: pm8916@0 {

	pm8916_0: pm8916@0 {

		pon@800 {

		pon@800 {