Commit 3910c580 authored by Jonathan Albrieux's avatar Jonathan Albrieux Committed by Rob Herring
Browse files

dt-bindings: iio: imu: bmi160: convert format to yaml, add maintainer 



Converts documentation from txt format to yaml.

Signed-off-by: default avatarJonathan Albrieux <jonathan.albrieux@gmail.com>
Signed-off-by: default avatarRob Herring <robh@kernel.org>
parent 93579696

Documentation/devicetree/bindings/iio/imu/bmi160.txt

deleted100644 → 0
+0 −37
Original line number Diff line number Diff line 
Bosch BMI160 - Inertial Measurement Unit with Accelerometer, Gyroscope

and externally connectable Magnetometer



https://www.bosch-sensortec.com/bst/products/all_products/bmi160



Required properties:

 - compatible : should be "bosch,bmi160"

 - reg : the I2C address or SPI chip select number of the sensor

 - spi-max-frequency : set maximum clock frequency (only for SPI)



Optional properties:

 - interrupts : interrupt mapping for IRQ

 - interrupt-names : set to "INT1" if INT1 pin should be used as interrupt

   input, set to "INT2" if INT2 pin should be used instead

 - drive-open-drain : set if the specified interrupt pin should be configured as

   open drain. If not set, defaults to push-pull.



Examples:



bmi160@68 {

	compatible = "bosch,bmi160";

	reg = <0x68>;



	interrupt-parent = <&gpio4>;

	interrupts = <12 IRQ_TYPE_EDGE_RISING>;

	interrupt-names = "INT1";

};



bmi160@0 {

	compatible = "bosch,bmi160";

	reg = <0>;

	spi-max-frequency = <10000000>;



	interrupt-parent = <&gpio2>;

	interrupts = <12 IRQ_TYPE_LEVEL_LOW>;

	interrupt-names = "INT2";

};

Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml

0 → 100644
+75 −0
Original line number Diff line number Diff line 
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)

%YAML 1.2

---

$id: http://devicetree.org/schemas/iio/imu/bosch,bmi160.yaml#

$schema: http://devicetree.org/meta-schemas/core.yaml#



title: Bosch BMI160



maintainers:

  - Jonathan Cameron <jic23@kernel.org>



description: |

  Inertial Measurement Unit with Accelerometer, Gyroscope and externally

  connectable Magnetometer

  https://www.bosch-sensortec.com/bst/products/all_products/bmi160



properties:

  compatible:

    const: bosch,bmi160



  reg:

    maxItems: 1



  interrupts:

    maxItems: 1



  interrupt-names:

    enum:

      - INT1

      - INT2

    description: |

      set to "INT1" if INT1 pin should be used as interrupt input, set

      to "INT2" if INT2 pin should be used instead



  drive-open-drain:

    description: |

      set if the specified interrupt pin should be configured as

      open drain. If not set, defaults to push-pull.



required:

  - compatible

  - reg



examples:

  - |

    // Example for I2C

    #include <dt-bindings/interrupt-controller/irq.h>

    i2c {

        #address-cells = <1>;

        #size-cells = <0>;



        bmi160@68 {

                compatible = "bosch,bmi160";

                reg = <0x68>;

                interrupt-parent = <&gpio4>;

                interrupts = <12 IRQ_TYPE_EDGE_RISING>;

                interrupt-names = "INT1";

        };

    };

  - |

    // Example for SPI

    #include <dt-bindings/interrupt-controller/irq.h>

    spi {

        #address-cells = <1>;

        #size-cells = <0>;



        bmi160@0 {

                compatible = "bosch,bmi160";

                reg = <0>;

                spi-max-frequency = <10000000>;

                interrupt-parent = <&gpio2>;

                interrupts = <12 IRQ_TYPE_EDGE_RISING>;

                interrupt-names = "INT2";

        };

    };