Commit 37744fee authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Rich Felker
Browse files

sh: remove sh5 support 



sh5 never became a product and has probably never really worked.

Remove it by recursively deleting all associated Kconfig options
and all corresponding files.

Reviewed-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarRich Felker <dalias@libc.org>
parent d1f56f31

arch/sh/Kconfig

+10 −52
Original line number Diff line number Diff line
@@ -54,15 +54,6 @@ config SUPERH 
	select HAVE_NMI

	select NEED_SG_DMA_LENGTH

	select ARCH_HAS_GIGANTIC_PAGE



	help

	  The SuperH is a RISC processor targeted for use in embedded systems

	  and consumer electronics; it was also used in the Sega Dreamcast

	  gaming console.  The SuperH port has a home page at

	  <http://www.linux-sh.org/>.



config SUPERH32

	def_bool "$(ARCH)" = "sh"

	select ARCH_32BIT_OFF_T

	select GUP_GET_PTE_LOW_HIGH if X2TLB

	select HAVE_KPROBES
@@ -81,19 +72,15 @@ config SUPERH32 
	select ARCH_HIBERNATION_POSSIBLE if MMU

	select SPARSE_IRQ

	select HAVE_STACKPROTECTOR



config SUPERH64

	def_bool "$(ARCH)" = "sh64"

	select HAVE_EXIT_THREAD

	select KALLSYMS

	help

	  The SuperH is a RISC processor targeted for use in embedded systems

	  and consumer electronics; it was also used in the Sega Dreamcast

	  gaming console.  The SuperH port has a home page at

	  <http://www.linux-sh.org/>.



config GENERIC_BUG

	def_bool y

	depends on BUG && SUPERH32



config GENERIC_CSUM

	def_bool y

	depends on SUPERH64

	depends on BUG



config GENERIC_HWEIGHT

	def_bool y
@@ -203,12 +190,6 @@ config CPU_SH4AL_DSP 
	select CPU_SH4A

	select CPU_HAS_DSP



config CPU_SH5

	bool

	select CPU_HAS_FPU

	select SYS_SUPPORTS_SH_TMU

	select SYS_SUPPORTS_HUGETLBFS if MMU



config CPU_SHX2

	bool
@@ -228,8 +209,6 @@ config CPU_HAS_PMU 
       default y

       bool



if SUPERH32



choice

	prompt "Processor sub-type selection"
@@ -518,27 +497,6 @@ config CPU_SUBTYPE_SH7366 


endchoice



endif



if SUPERH64



choice

	prompt "Processor sub-type selection"



# SH-5 Processor Support



config CPU_SUBTYPE_SH5_101

	bool "Support SH5-101 processor"

	select CPU_SH5



config CPU_SUBTYPE_SH5_103

	bool "Support SH5-103 processor"

	select CPU_SH5



endchoice



endif



source "arch/sh/mm/Kconfig"

 

source "arch/sh/Kconfig.cpu"
@@ -592,7 +550,7 @@ source "kernel/Kconfig.hz" 


config KEXEC

	bool "kexec system call (EXPERIMENTAL)"

	depends on SUPERH32 && MMU

	depends on MMU

	select KEXEC_CORE

	help

	  kexec is a system call that implements the ability to shutdown your
@@ -610,7 +568,7 @@ config KEXEC 


config CRASH_DUMP

	bool "kernel crash dumps (EXPERIMENTAL)"

	depends on SUPERH32 && BROKEN_ON_SMP

	depends on BROKEN_ON_SMP

	help

	  Generate crash dump after being started by kexec.

	  This should be normally only set in special crash dump kernels
@@ -624,7 +582,7 @@ config CRASH_DUMP 


config KEXEC_JUMP

	bool "kexec jump (EXPERIMENTAL)"

	depends on SUPERH32 && KEXEC && HIBERNATION

	depends on KEXEC && HIBERNATION

	help

	  Jump between original kernel and kexeced kernel and invoke

	  code via KEXEC
@@ -701,7 +659,7 @@ config HOTPLUG_CPU 


config GUSA

	def_bool y

	depends on !SMP && SUPERH32

	depends on !SMP

	help

	  This enables support for gUSA (general UserSpace Atomicity).

	  This is the default implementation for both UP and non-ll/sc

arch/sh/Kconfig.cpu

+0 −9
Original line number Diff line number Diff line
@@ -13,7 +13,6 @@ config CPU_LITTLE_ENDIAN 


config CPU_BIG_ENDIAN

	bool "Big Endian"

	depends on !CPU_SH5



endchoice
@@ -27,10 +26,6 @@ config SH_FPU 


	  This option must be set in order to enable the FPU.



config SH64_FPU_DENORM_FLUSH

	bool "Flush floating point denorms to zero"

	depends on SH_FPU && SUPERH64



config SH_FPU_EMU

	def_bool n

	prompt "FPU emulation support"
@@ -77,10 +72,6 @@ config SPECULATIVE_EXECUTION 


	  If unsure, say N.



config SH64_ID2815_WORKAROUND

	bool "Include workaround for SH5-101 cut2 silicon defect ID2815"

	depends on CPU_SUBTYPE_SH5_101



config CPU_HAS_INTEVT

	bool

arch/sh/Kconfig.debug

+3 −10
Original line number Diff line number Diff line
@@ -5,7 +5,6 @@ config TRACE_IRQFLAGS_SUPPORT 


config SH_STANDARD_BIOS

	bool "Use LinuxSH standard BIOS"

	depends on SUPERH32

	help

	  Say Y here if your target has the gdb-sh-stub

	  package from www.m17n.org (or any conforming standard LinuxSH BIOS)
@@ -19,7 +18,7 @@ config SH_STANDARD_BIOS 


config STACK_DEBUG

	bool "Check for stack overflows"

	depends on DEBUG_KERNEL && SUPERH32

	depends on DEBUG_KERNEL

	help

	  This option will cause messages to be printed if free stack space

	  drops below a certain limit. Saying Y here will add overhead to
@@ -38,7 +37,7 @@ config 4KSTACKS 


config IRQSTACKS

	bool "Use separate kernel stacks when processing interrupts"

	depends on DEBUG_KERNEL && SUPERH32 && BROKEN

	depends on DEBUG_KERNEL && BROKEN

	help

	  If you say Y here the kernel will use separate kernel stacks

	  for handling hard and soft interrupts.  This can help avoid
@@ -46,7 +45,7 @@ config IRQSTACKS 


config DUMP_CODE

	bool "Show disassembly of nearby code in register dumps"

	depends on DEBUG_KERNEL && SUPERH32

	depends on DEBUG_KERNEL

	default y if DEBUG_BUGVERBOSE

	default n

	help
@@ -59,7 +58,6 @@ config DUMP_CODE 
config DWARF_UNWINDER

	bool "Enable the DWARF unwinder for stacktraces"

	select FRAME_POINTER

	depends on SUPERH32

	default n

	help

	  Enabling this option will make stacktraces more accurate, at
@@ -77,11 +75,6 @@ config SH_NO_BSS_INIT 
	  For all other cases, say N. If this option seems perplexing, or

	  you aren't sure, say N.



config SH64_SR_WATCH

	bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"

	depends on SUPERH64



config MCOUNT

	def_bool y

	depends on SUPERH32

	depends on STACK_DEBUG || FUNCTION_TRACER

arch/sh/Makefile

+7 −22
Original line number Diff line number Diff line
@@ -11,7 +11,7 @@ 
#

ifneq ($(SUBARCH),$(ARCH))

  ifeq ($(CROSS_COMPILE),)

    CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux-  $(UTS_MACHINE)-linux-gnu-  $(UTS_MACHINE)-unknown-linux-gnu-)

    CROSS_COMPILE := $(call cc-cross-prefix, sh-linux- sh-linux-gnu- sh-unknown-linux-gnu-)

  endif

endif
@@ -29,12 +29,9 @@ isa-$(CONFIG_CPU_SH3) := sh3 
isa-$(CONFIG_CPU_SH4)			:= sh4

isa-$(CONFIG_CPU_SH4A)			:= sh4a

isa-$(CONFIG_CPU_SH4AL_DSP)		:= sh4al

isa-$(CONFIG_CPU_SH5)			:= shmedia



ifeq ($(CONFIG_SUPERH32),y)

isa-$(CONFIG_SH_DSP)			:= $(isa-y)-dsp

isa-y					:= $(isa-y)-up

endif



cflags-$(CONFIG_CPU_SH2)		:= $(call cc-option,-m2,)

cflags-$(CONFIG_CPU_J2)			+= $(call cc-option,-mj2,)
@@ -47,7 +44,6 @@ cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \ 
cflags-$(CONFIG_CPU_SH4A)		+= $(call cc-option,-m4a,) \

					   $(call cc-option,-m4a-nofpu,)

cflags-$(CONFIG_CPU_SH4AL_DSP)		+= $(call cc-option,-m4al,)

cflags-$(CONFIG_CPU_SH5)		:= $(call cc-option,-m5-32media-nofpu,)



ifeq ($(cflags-y),)

#
@@ -88,7 +84,7 @@ OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \ 
		   -R .stab -R .stabstr -S



# Give the various platforms the opportunity to set default image types

defaultimage-$(CONFIG_SUPERH32)			:= zImage

defaultimage-y					:= zImage

defaultimage-$(CONFIG_SH_SH7785LCR)		:= uImage

defaultimage-$(CONFIG_SH_RSK)			:= uImage

defaultimage-$(CONFIG_SH_URQUELL)		:= uImage
@@ -107,31 +103,22 @@ KBUILD_IMAGE := $(boot)/$(defaultimage-y) 
# Choosing incompatible machines durings configuration will result in

# error messages during linking.

#

ifdef CONFIG_SUPERH32

UTS_MACHINE		:= sh

BITS			:= 32

LDFLAGS_vmlinux		+= -e _stext

else

UTS_MACHINE		:= sh64

BITS			:= 64

LDFLAGS_vmlinux		+= --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \

			   --defsym phys_stext_shmedia=phys_stext+1 \

			   -e phys_stext_shmedia

endif



ifdef CONFIG_CPU_LITTLE_ENDIAN

ld-bfd			:= elf32-$(UTS_MACHINE)-linux

ld-bfd			:= elf32-sh-linux

LDFLAGS_vmlinux		+= --defsym jiffies=jiffies_64 --oformat $(ld-bfd)

KBUILD_LDFLAGS		+= -EL

else

ld-bfd			:= elf32-$(UTS_MACHINE)big-linux

ld-bfd			:= elf32-shbig-linux

LDFLAGS_vmlinux		+= --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd)

KBUILD_LDFLAGS		+= -EB

endif



export ld-bfd BITS

export ld-bfd



head-y	:= arch/sh/kernel/head_$(BITS).o

head-y	:= arch/sh/kernel/head_32.o



core-y				+= arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/

core-$(CONFIG_SH_FPU_EMU)	+= arch/sh/math-emu/
@@ -185,7 +172,6 @@ cpuincdir-$(CONFIG_CPU_SH2) += cpu-sh2 
cpuincdir-$(CONFIG_CPU_SH3)	+= cpu-sh3

cpuincdir-$(CONFIG_CPU_SH4A)	+= cpu-sh4a

cpuincdir-$(CONFIG_CPU_SH4)	+= cpu-sh4

cpuincdir-$(CONFIG_CPU_SH5)	+= cpu-sh5

cpuincdir-y			+= cpu-common	# Must be last



drivers-y			+= arch/sh/drivers/
@@ -206,8 +192,7 @@ ifeq ($(CONFIG_DWARF_UNWINDER),y) 
  KBUILD_CFLAGS += -fasynchronous-unwind-tables

endif



libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)

libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)

libs-y			:= arch/sh/lib/	$(libs-y)



BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.xz uImage.lzo \

	       uImage.srec uImage.bin zImage vmlinux.bin vmlinux.srec \

arch/sh/boot/compressed/Makefile

+4 −8
Original line number Diff line number Diff line
@@ -8,9 +8,9 @@ 
targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \

		   vmlinux.bin.bz2 vmlinux.bin.lzma \

		   vmlinux.bin.xz vmlinux.bin.lzo \

		   head_$(BITS).o misc.o piggy.o

		   head_32.o misc.o piggy.o



OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o

OBJECTS = $(obj)/head_32.o $(obj)/misc.o $(obj)/cache.o



GCOV_PROFILE := n
@@ -39,15 +39,11 @@ LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \ 
#

# Pull in the necessary libgcc bits from the in-kernel implementation.

#

lib1funcs-$(CONFIG_SUPERH32)	:= ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S \

				   lshrsi3.S

lib1funcs-y	:= ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S lshrsi3.S

lib1funcs-obj   := \

	$(addsuffix .o, $(basename $(addprefix $(obj)/, $(lib1funcs-y))))



lib1funcs-dir		:= $(srctree)/arch/$(SRCARCH)/lib

ifeq ($(BITS),64)

	lib1funcs-dir 	:= $(addsuffix $(BITS), $(lib1funcs-dir))

endif



KBUILD_CFLAGS += -I$(lib1funcs-dir) -DDISABLE_BRANCH_PROFILING