media: dt-bindings: media: i2c: document OV02A10 DT bindings

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)

# Copyright (c) 2020 MediaTek Inc.

%YAML 1.2

---

$id: http://devicetree.org/schemas/media/i2c/ovti,ov02a10.yaml#

$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Omnivision OV02A10 CMOS Sensor Device Tree Bindings

maintainers:

  - Dongchun Zhu <dongchun.zhu@mediatek.com>

description: |-

  The Omnivision OV02A10 is a low-cost, high performance, 1/5-inch, 2 megapixel

  image sensor, which is the latest production derived from Omnivision's CMOS

  image sensor technology. Ihis chip supports high frame rate speeds up to 30fps

  @ 1600x1200 (UXGA) resolution transferred over a 1-lane MIPI interface. The

  sensor output is available via CSI-2 serial data output.

properties:

  compatible:

    const: ovti,ov02a10

  reg:

    maxItems: 1

  clocks:

    maxItems: 1

  clock-names:

    description:

      External clock for the sensor.

    items:

      - const: eclk

  clock-frequency:

    description:

      Frequency of the eclk clock in Hz.

  dovdd-supply:

    description:

      Definition of the regulator used as Digital I/O voltage supply.

  avdd-supply:

    description:

      Definition of the regulator used as Analog voltage supply.

  dvdd-supply:

    description:

      Definition of the regulator used as Digital core voltage supply.

  powerdown-gpios:

    description:

      Must be the device tree identifier of the GPIO connected to the

      PD_PAD pin. This pin is used to place the OV02A10 into standby mode

      or shutdown mode. As the line needs to be high for the powerdown mode

      to be active, it should be marked GPIO_ACTIVE_HIGH.

    maxItems: 1

  reset-gpios:

    description:

      Must be the device tree identifier of the GPIO connected to the

      RST_PD pin. If specified, it will be asserted during driver probe.

      As the line needs to be low for the reset to be active, it should be

      marked GPIO_ACTIVE_LOW.

    maxItems: 1

  rotation:

    description:

      Definition of the sensor's placement.

    allOf:

      - $ref: "/schemas/types.yaml#/definitions/uint32"

      - enum:

          - 0    # Sensor Mounted Upright

          - 180  # Sensor Mounted Upside Down

        default: 0

  # See ../video-interfaces.txt for details

  port:

    type: object

    additionalProperties: false

    description:

      Output port node, single endpoint describing the CSI-2 transmitter.

    properties:

      endpoint:

        type: object

        additionalProperties: false

        properties:

          link-frequencies: true

          ovti,mipi-clock-voltage:

            allOf:

              - $ref: "/schemas/types.yaml#/definitions/uint32"

            description:

              Definition of MIPI clock voltage unit. This entry corresponds to

              the link speed defined by the 'link-frequencies' property.

              If present, the value shall be in the range of 0-4.

            default: 4

          remote-endpoint: true

        required:

          - link-frequencies

          - remote-endpoint

    required:

      - endpoint

required:

  - compatible

  - reg

  - clocks

  - clock-names

  - clock-frequency

  - dovdd-supply

  - avdd-supply

  - dvdd-supply

  - powerdown-gpios

  - reset-gpios

  - port

additionalProperties: false

examples:

  - |

    #include <dt-bindings/gpio/gpio.h>

    i2c {

        #address-cells = <1>;

        #size-cells = <0>;

        ov02a10: camera-sensor@3d {

            compatible = "ovti,ov02a10";

            reg = <0x3d>;

            powerdown-gpios = <&pio 107 GPIO_ACTIVE_HIGH>;

            reset-gpios = <&pio 109 GPIO_ACTIVE_LOW>;

            clocks = <&ov02a10_clk>;

            clock-names = "eclk";

            clock-frequency = <24000000>;

            rotation = <180>;

            dovdd-supply = <&ov02a10_dovdd>;

            avdd-supply = <&ov02a10_avdd>;

            dvdd-supply = <&ov02a10_dvdd>;

            port {

                wcam_out: endpoint {

                    link-frequencies = /bits/ 64 <390000000>;

                    ovti,mipi-clock-voltage = <3>;

                    remote-endpoint = <&mipi_in_wcam>;

                };

            };

        };

    };

...

S:	Maintained

F:	drivers/char/pcmcia/cm4040_cs.*

OMNIVISION OV02A10 SENSOR DRIVER

M:	Dongchun Zhu <dongchun.zhu@mediatek.com>

L:	linux-media@vger.kernel.org

S:	Maintained

T:	git git://linuxtv.org/media_tree.git

F:	Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml

OMNIVISION OV13858 SENSOR DRIVER

M:	Sakari Ailus <sakari.ailus@linux.intel.com>

L:	linux-media@vger.kernel.org