Commit 33f6c688 authored by Tracey Dent's avatar Tracey Dent Committed by Greg Kroah-Hartman
Browse files

Staging: rtl8187se: r8180_hw: fixed a lot of checkpatch.pl issues 



Fixed numerous coding style issues using checkpatch.pl

Signed-off-by: default avatarTracey Dent <tdent48227@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 888b9de5

drivers/staging/rtl8187se/r8180_hw.h

+221 −211
Original line number Diff line number Diff line
@@ -87,7 +87,7 @@ 
#define INTA_RXOK (1)

#define INTA_MASK 0x3c



#define RXRING_ADDR 0xe4 // page 0

#define RXRING_ADDR 0xe4 /* page 0 */

#define PGSELECT 0x5e

#define PGSELECT_PG_SHIFT 0

#define RX_CONF 0x44
@@ -149,13 +149,13 @@ 
#define EPROM_CS_SHIFT 3

#define EPROM_CK_SHIFT 2

#define PHY_ADR 0x7c

#define SECURITY 0x5f //1209 this is sth wrong

#define SECURITY 0x5f /* 1209 this is sth wrong */

#define SECURITY_WEP_TX_ENABLE_SHIFT 1

#define SECURITY_WEP_RX_ENABLE_SHIFT 0

#define SECURITY_ENCRYP_104 1

#define SECURITY_ENCRYP_SHIFT 4

#define SECURITY_ENCRYP_MASK ((1<<4)|(1<<5))

#define KEY0 0x90  //1209 this is sth wrong

#define KEY0 0x90  /* 1209 this is sth wrong */

#define CONFIG2_ANTENNA_SHIFT 6

#define TX_BEACON_RING_ADDR 0x4c

#define CONFIG0_WEP40_SHIFT 7
@@ -177,11 +177,11 @@ 


#define CR 0x0037



#define RF_SW_CONFIG	        0x8			// store data which is transmitted to RF for driver

#define RF_SW_CONFIG	        0x8			/* store data which is transmitted to RF for driver	*/

#define RF_SW_CFG_SI		BIT1

#define EIFS			0x2D			// Extended InterFrame Space Timer, in unit of 4 us.

#define EIFS			0x2D			/* Extended InterFrame Space Timer, in unit of 4 us.	*/



#define BRSR			0x34			// Basic rate set

#define BRSR			0x34			/* Basic rate set										*/



#define IMR 0x006C

#define ISR 0x003C
@@ -201,8 +201,8 @@ 


#define CONFIG3 0x0059

#define CONFIG4 0x005A

	// SD3 szuyitasi: Mac0x57= CC -> B0 Mac0x60= D1 -> C6

	// Mac0x60 = 0x000004C6 power save parameters

	/* SD3 szuyitasi: Mac0x57= CC -> B0 Mac0x60= D1 -> C6	*/

	/* Mac0x60 = 0x000004C6 power save parameters			*/

	#define ANAPARM_ASIC_ON    0xB0054D00

	#define ANAPARM2_ASIC_ON  0x000004C6
@@ -256,9 +256,9 @@ 


#define CONFIG5 0x00D8



#define PHYPR			0xDA			//0xDA - 0x0B PHY Parameter Register.

#define PHYPR			0xDA			/* 0xDA - 0x0B PHY Parameter Register.	*/



#define FEMR			0x1D4	// Function Event Mask register

#define FEMR			0x1D4	/* Function Event Mask register	*/



#define FFER 0x00FC

#define FFER_END 0x00FF
@@ -285,61 +285,61 @@ 
#define CR_TE       ((1 << 2))

#define CR_MulRW    ((1 << 0))



#define IMR_Dot11hInt	((1<< 25))			// 802.11h Measurement Interrupt

#define IMR_BcnDmaInt	((1<< 24))			// Beacon DMA Interrupt // What differenct between BcnDmaInt and BcnInt???

#define IMR_WakeInt		((1<< 23))			// Wake Up Interrupt

#define IMR_TXFOVW		((1<< 22))			// Tx FIFO Overflow Interrupt

#define IMR_TimeOut1	((1<< 21))			// Time Out Interrupt 1

#define IMR_BcnInt		((1<< 20))			// Beacon Time out Interrupt

#define IMR_ATIMInt		((1<< 19))			// ATIM Time Out Interrupt

#define IMR_TBDER		((1<< 18))			// Tx Beacon Descriptor Error Interrupt

#define IMR_TBDOK		((1<< 17))			// Tx Beacon Descriptor OK Interrupt

#define IMR_THPDER		((1<< 16))			// Tx High Priority Descriptor Error Interrupt

#define IMR_THPDOK		((1<< 15))			// Tx High Priority Descriptor OK Interrupt

#define IMR_TVODER		((1<< 14))			// Tx AC_VO Descriptor Error Interrupt

#define IMR_TVODOK		((1<< 13))			// Tx AC_VO Descriptor OK Interrupt

#define IMR_FOVW		((1<< 12))			// Rx FIFO Overflow Interrupt

#define IMR_RDU			((1<< 11))			// Rx Descriptor Unavailable Interrupt

#define IMR_TVIDER		((1<< 10))			// Tx AC_VI Descriptor Error Interrupt

#define IMR_TVIDOK		((1<< 9))		// Tx AC_VI Descriptor OK Interrupt

#define IMR_RER			((1<< 8))		// Rx Error Interrupt

#define IMR_ROK			((1<< 7))		// Receive OK Interrupt

#define IMR_TBEDER		((1<< 6))			// Tx AC_BE Descriptor Error Interrupt

#define IMR_TBEDOK		((1<< 5))			// Tx AC_BE Descriptor OK Interrupt

#define IMR_TBKDER		((1<< 4))		// Tx AC_BK Descriptor Error Interrupt

#define IMR_TBKDOK		((1<< 3))			// Tx AC_BK Descriptor OK Interrupt

#define IMR_RQoSOK		((1<< 2))		// Rx QoS OK Interrupt

#define IMR_TimeOut2	((1<< 1))		// Time Out Interrupt 2

#define IMR_TimeOut3	((1<< 0))			// Time Out Interrupt 3

#define IMR_Dot11hInt	((1 << 25))			/*802.11h Measurement Interrupt					*/

#define IMR_BcnDmaInt	((1 << 24))			/*Beacon DMA Interrupt */ /*What differenct between BcnDmaInt and BcnInt???	*/

#define IMR_WakeInt		((1 << 23))			/*Wake Up Interrupt								*/

#define IMR_TXFOVW		((1 << 22))			/*Tx FIFO Overflow Interrupt					*/

#define IMR_TimeOut1	((1 << 21))			/*Time Out Interrupt 1							*/

#define IMR_BcnInt		((1 << 20))			/*Beacon Time out Interrupt						*/

#define IMR_ATIMInt		((1 << 19))			/*ATIM Time Out Interrupt						*/

#define IMR_TBDER		((1 << 18))			/*Tx Beacon Descriptor Error Interrupt			*/

#define IMR_TBDOK		((1 << 17))			/*Tx Beacon Descriptor OK Interrupt				*/

#define IMR_THPDER		((1 << 16))			/*Tx High Priority Descriptor Error Interrupt	*/

#define IMR_THPDOK		((1 << 15))			/*Tx High Priority Descriptor OK Interrupt		*/

#define IMR_TVODER		((1 << 14))			/*Tx AC_VO Descriptor Error Interrupt			*/

#define IMR_TVODOK		((1 << 13))			/*Tx AC_VO Descriptor OK Interrupt				*/

#define IMR_FOVW		((1 << 12))			/*Rx FIFO Overflow Interrupt					*/

#define IMR_RDU			((1 << 11))			/*Rx Descriptor Unavailable Interrupt			*/

#define IMR_TVIDER		((1 << 10))			/*Tx AC_VI Descriptor Error Interrupt			*/

#define IMR_TVIDOK		((1 << 9))			/*Tx AC_VI Descriptor OK Interrupt				*/

#define IMR_RER			((1 << 8))			/*Rx Error Interrupt							*/

#define IMR_ROK			((1 << 7))			/*Receive OK Interrupt							*/

#define IMR_TBEDER		((1 << 6))			/*Tx AC_BE Descriptor Error Interrupt			*/

#define IMR_TBEDOK		((1 << 5))			/*Tx AC_BE Descriptor OK Interrupt				*/

#define IMR_TBKDER		((1 << 4))			/*Tx AC_BK Descriptor Error Interrupt			*/

#define IMR_TBKDOK		((1 << 3))			/*Tx AC_BK Descriptor OK Interrupt				*/

#define IMR_RQoSOK		((1 << 2))			/*Rx QoS OK Interrupt							*/

#define IMR_TimeOut2	((1 << 1))			/*Time Out Interrupt 2							*/

#define IMR_TimeOut3	((1 << 0))			/*Time Out Interrupt 3							*/

#define IMR_TMGDOK      ((1 << 30))

#define ISR_Dot11hInt	((1<< 25))			// 802.11h Measurement Interrupt

#define ISR_BcnDmaInt	((1<< 24))			// Beacon DMA Interrupt // What differenct between BcnDmaInt and BcnInt???

#define ISR_WakeInt		((1<< 23))			// Wake Up Interrupt

#define ISR_TXFOVW		((1<< 22))			// Tx FIFO Overflow Interrupt

#define ISR_TimeOut1	((1<< 21))			// Time Out Interrupt 1

#define ISR_BcnInt		((1<< 20))			// Beacon Time out Interrupt

#define ISR_ATIMInt		((1<< 19))			// ATIM Time Out Interrupt

#define ISR_TBDER		((1<< 18))			// Tx Beacon Descriptor Error Interrupt

#define ISR_TBDOK		((1<< 17))			// Tx Beacon Descriptor OK Interrupt

#define ISR_THPDER		((1<< 16))			// Tx High Priority Descriptor Error Interrupt

#define ISR_THPDOK		((1<< 15))			// Tx High Priority Descriptor OK Interrupt

#define ISR_TVODER		((1<< 14))			// Tx AC_VO Descriptor Error Interrupt

#define ISR_TVODOK		((1<< 13))			// Tx AC_VO Descriptor OK Interrupt

#define ISR_FOVW		((1<< 12))			// Rx FIFO Overflow Interrupt

#define ISR_RDU			((1<< 11))			// Rx Descriptor Unavailable Interrupt

#define ISR_TVIDER		((1<< 10))			// Tx AC_VI Descriptor Error Interrupt

#define ISR_TVIDOK		((1<< 9))		// Tx AC_VI Descriptor OK Interrupt

#define ISR_RER			((1<< 8))		// Rx Error Interrupt

#define ISR_ROK			((1<< 7))		// Receive OK Interrupt

#define ISR_TBEDER		((1<< 6))			// Tx AC_BE Descriptor Error Interrupt

#define ISR_TBEDOK		((1<< 5))			// Tx AC_BE Descriptor OK Interrupt

#define ISR_TBKDER		((1<< 4))		// Tx AC_BK Descriptor Error Interrupt

#define ISR_TBKDOK		((1<< 3))			// Tx AC_BK Descriptor OK Interrupt

#define ISR_RQoSOK		((1<< 2))		// Rx QoS OK Interrupt

#define ISR_TimeOut2	((1<< 1))		// Time Out Interrupt 2

#define ISR_TimeOut3	((1<< 0))			// Time Out Interrupt 3



//these definition is used for Tx/Rx test temporarily

#define ISR_Dot11hInt	((1 << 25))			/*802.11h Measurement Interrupt					*/

#define ISR_BcnDmaInt	((1 << 24))			/*Beacon DMA Interrupt	*/ /*What differenct between BcnDmaInt and BcnInt???	*/

#define ISR_WakeInt		((1 << 23))			/*Wake Up Interrupt								*/

#define ISR_TXFOVW		((1 << 22))			/*Tx FIFO Overflow Interrupt					*/

#define ISR_TimeOut1	((1 << 21))			/*Time Out Interrupt 1							*/

#define ISR_BcnInt		((1 << 20))			/*Beacon Time out Interrupt						*/

#define ISR_ATIMInt		((1 << 19))			/*ATIM Time Out Interrupt						*/

#define ISR_TBDER		((1 << 18))			/*Tx Beacon Descriptor Error Interrupt			*/

#define ISR_TBDOK		((1 << 17))			/*Tx Beacon Descriptor OK Interrupt				*/

#define ISR_THPDER		((1 << 16))			/*Tx High Priority Descriptor Error Interrupt	*/

#define ISR_THPDOK		((1 << 15))			/*Tx High Priority Descriptor OK Interrupt		*/

#define ISR_TVODER		((1 << 14))			/*Tx AC_VO Descriptor Error Interrupt			*/

#define ISR_TVODOK		((1 << 13))			/*Tx AC_VO Descriptor OK Interrupt				*/

#define ISR_FOVW		((1 << 12))			/*Rx FIFO Overflow Interrupt					*/

#define ISR_RDU			((1 << 11))			/*Rx Descriptor Unavailable Interrupt			*/

#define ISR_TVIDER		((1 << 10))			/*Tx AC_VI Descriptor Error Interrupt			*/

#define ISR_TVIDOK		((1 << 9))			/*Tx AC_VI Descriptor OK Interrupt				*/

#define ISR_RER			((1 << 8))			/*Rx Error Interrupt							*/

#define ISR_ROK			((1 << 7))			/*Receive OK Interrupt							*/

#define ISR_TBEDER		((1 << 6))			/*Tx AC_BE Descriptor Error Interrupt			*/

#define ISR_TBEDOK		((1 << 5))			/*Tx AC_BE Descriptor OK Interrupt				*/

#define ISR_TBKDER		((1 << 4))			/*Tx AC_BK Descriptor Error Interrupt			*/

#define ISR_TBKDOK		((1 << 3))			/*Tx AC_BK Descriptor OK Interrupt				*/

#define ISR_RQoSOK		((1 << 2))			/*Rx QoS OK Interrupt							*/

#define ISR_TimeOut2	((1 << 1))			/*Time Out Interrupt 2							*/

#define ISR_TimeOut3	((1 << 0))			/*Time Out Interrupt 3							*/



/* these definition is used for Tx/Rx test temporarily */

#define ISR_TLPDER  ISR_TVIDER

#define ISR_TLPDOK  ISR_TVIDOK

#define ISR_TNPDER  ISR_TVODER
@@ -359,7 +359,7 @@ 
#define TCR_HWVERID_MASK ((1 << 27)|(1 << 26)|(1 << 25))

#define TCR_HWVERID_SHIFT 25

#define TCR_SAT     ((1 << 24))

#define TCR_PLCP_LEN TCR_SAT // rtl8180

#define TCR_PLCP_LEN TCR_SAT /* rtl8180 */

#define TCR_MXDMA_MASK   ((1 << 23)|(1 << 22)|(1 << 21))

#define TCR_MXDMA_1024 6

#define TCR_MXDMA_2048 7
@@ -372,7 +372,7 @@ 
#define TCR_CRC     ((1 << 16))

#define TCR_DPRETRY_MASK   ((1 << 15)|(1 << 14)|(1 << 13)|(1 << 12)|(1 << 11)|(1 << 10)|(1 << 9)|(1 << 8))

#define TCR_RTSRETRY_MASK   ((1 << 0)|(1 << 1)|(1 << 2)|(1 << 3)|(1 << 4)|(1 << 5)|(1 << 6)|(1 << 7))

#define TCR_PROBE_NOTIMESTAMP_SHIFT 29 //rtl8185

#define TCR_PROBE_NOTIMESTAMP_SHIFT 29 /* rtl8185 */



#define RCR_ONLYERLPKT ((1 << 31))

#define RCR_CS_SHIFT   29
@@ -433,13 +433,13 @@ 
#define FFER_INTR    ((1 << 15))

#define FFER_GWAKE   ((1 << 4))



// Three wire mode.

/* Three wire mode.					*/

#define SW_THREE_WIRE			0

#define HW_THREE_WIRE			2

//RTL8187S by amy

/* RTL8187S by amy					*/

#define HW_THREE_WIRE_PI		5

#define HW_THREE_WIRE_SI		6

//by amy

/* by amy							*/

#define TCR_LRL_OFFSET		0

#define TCR_SRL_OFFSET		8

#define TCR_MXDMA_OFFSET	21
@@ -449,86 +449,96 @@ 
#define RCR_MXDMA_OFFSET				8

#define RCR_FIFO_OFFSET					13



#define AckTimeOutReg	0x79		// ACK timeout register, in unit of 4 us.

#define AckTimeOutReg	0x79		/* ACK timeout register, in unit of 4 us. */



#define RFTiming			0x8C



#define TPPollStop		0x93



#define TXAGC_CTL		0x9C			// <RJ_TODO_8185B> TX_AGC_CONTROL (0x9C seems be removed at 8185B, see p37).

#define TXAGC_CTL		0x9C			/*< RJ_TODO_8185B> TX_AGC_CONTROL (0x9C seems be removed at 8185B, see p37). */

#define CCK_TXAGC		0x9D

#define OFDM_TXAGC		0x9E

#define ANTSEL			0x9F



#define ACM_CONTROL             0x00BF      // ACM Control Registe

#define ACM_CONTROL             0x00BF      /* ACM Control Registe */



#define	IntMig			0xE2			// Interrupt Migration (0xE2 ~ 0xE3)

#define	IntMig			0xE2			/* Interrupt Migration (0xE2 ~ 0xE3)	*/



#define TID_AC_MAP		0xE8			// TID to AC Mapping Register

#define TID_AC_MAP		0xE8			/* TID to AC Mapping Register			*/



#define ANAPARAM3		0xEE			// <RJ_TODO_8185B> How to use it?

#define ANAPARAM3		0xEE			/* <RJ_TODO_8185B> How to use it?		*/



#define AC_VO_PARAM		0xF0			// AC_VO Parameters Record

#define AC_VI_PARAM		0xF4			// AC_VI Parameters Record

#define AC_BE_PARAM		0xF8			// AC_BE Parameters Record

#define AC_BK_PARAM		0xFC			// AC_BK Parameters Record

#define AC_VO_PARAM		0xF0			/* AC_VO Parameters Record				*/

#define AC_VI_PARAM		0xF4			/* AC_VI Parameters Record				*/

#define AC_BE_PARAM		0xF8			/* AC_BE Parameters Record				*/

#define AC_BK_PARAM		0xFC			/* AC_BK Parameters Record				*/



#define GPIOCtrl			0x16B			// GPIO Control Register.

#define ARFR			0x1E0	// Auto Rate Fallback Register (0x1e0 ~ 0x1e2)

#define GPIOCtrl			0x16B			/*GPIO Control Register.			*/

#define ARFR			0x1E0	/* Auto Rate Fallback Register (0x1e0 ~ 0x1e2)	*/



#define RFSW_CTRL			0x272	// 0x272-0x273.

#define SW_3W_DB0			0x274	// Software 3-wire data buffer bit 31~0.

#define SW_3W_DB1			0x278	// Software 3-wire data buffer bit 63~32.

#define SW_3W_CMD0			0x27C	// Software 3-wire Control/Status Register.

#define SW_3W_CMD1			0x27D	// Software 3-wire Control/Status Register.

#define RFSW_CTRL			0x272	/* 0x272-0x273.								*/

#define SW_3W_DB0			0x274	/* Software 3-wire data buffer bit 31~0.		*/

#define SW_3W_DB1			0x278	/* Software 3-wire data buffer bit 63~32.	*/

#define SW_3W_CMD0			0x27C	/* Software 3-wire Control/Status Register.	*/

#define SW_3W_CMD1			0x27D	/* Software 3-wire Control/Status Register.	*/



#define PI_DATA_READ		0X360	// 0x360 - 0x361  Parallel Interface Data Register.

#define SI_DATA_READ		0x362	// 0x362 - 0x363  Serial Interface Data Register.

#define PI_DATA_READ		0X360	/* 0x360 - 0x361  Parallel Interface Data Register.	*/

#define SI_DATA_READ		0x362	/* 0x362 - 0x363  Serial Interface Data Register.	*/



//----------------------------------------------------------------------------

//       8185B TPPollStop bits 				(offset 0x93, 1 byte)

//----------------------------------------------------------------------------

/*

----------------------------------------------------------------------------

		8185B TPPollStop bits					(offset 0x93, 1 byte)

----------------------------------------------------------------------------

*/

#define TPPOLLSTOP_BQ			(0x01 << 7)

#define TPPOLLSTOP_AC_VIQ		(0x01 << 4)



#define MSR_LINK_ENEDCA	   (1<<4)



//----------------------------------------------------------------------------

//       8187B AC_XX_PARAM bits

//----------------------------------------------------------------------------

/*

----------------------------------------------------------------------------

		8187B AC_XX_PARAM bits

----------------------------------------------------------------------------

*/

#define AC_PARAM_TXOP_LIMIT_OFFSET		16

#define AC_PARAM_ECW_MAX_OFFSET			12

#define AC_PARAM_ECW_MIN_OFFSET			8

#define AC_PARAM_AIFS_OFFSET			0



//----------------------------------------------------------------------------

//       8187B ACM_CONTROL bits						(Offset 0xBF, 1 Byte)

//----------------------------------------------------------------------------

#define VOQ_ACM_EN				(0x01 << 7) //BIT7

#define VIQ_ACM_EN				(0x01 << 6) //BIT6

#define BEQ_ACM_EN				(0x01 << 5) //BIT5

#define ACM_HW_EN				(0x01 << 4) //BIT4

#define VOQ_ACM_CTL				(0x01 << 2) //BIT2 // Set to 1 when AC_VO used time reaches or exceeds the admitted time

#define VIQ_ACM_CTL				(0x01 << 1) //BIT1 // Set to 1 when AC_VI used time reaches or exceeds the admitted time

#define BEQ_ACM_CTL				(0x01 << 0) //BIT0 // Set to 1 when AC_BE used time reaches or exceeds the admitted time





//----------------------------------------------------------------------------

//       8185B SW_3W_CMD bits					(Offset 0x27C-0x27D, 16bit)

//----------------------------------------------------------------------------

/*

----------------------------------------------------------------------------

		8187B ACM_CONTROL bits					(Offset 0xBF, 1 Byte)

----------------------------------------------------------------------------

*/

#define VOQ_ACM_EN				(0x01 << 7)	/*BIT7	*/

#define VIQ_ACM_EN				(0x01 << 6)	/*BIT6	*/

#define BEQ_ACM_EN				(0x01 << 5)	/*BIT5	*/

#define ACM_HW_EN				(0x01 << 4)	/*BIT4	*/

#define VOQ_ACM_CTL				(0x01 << 2)	/*BIT2	*/	/* Set to 1 when AC_VO used time reaches or exceeds the admitted time	*/

#define VIQ_ACM_CTL				(0x01 << 1)	/*BIT1	*/	/* Set to 1 when AC_VI used time reaches or exceeds the admitted time	*/

#define BEQ_ACM_CTL				(0x01 << 0)	/*BIT0	*/	/* Set to 1 when AC_BE used time reaches or exceeds the admitted time	*/





/*

----------------------------------------------------------------------------

		8185B SW_3W_CMD bits					(Offset 0x27C-0x27D, 16bit)

----------------------------------------------------------------------------

*/

#define SW_3W_CMD0_HOLD		((1 << 7))

#define SW_3W_CMD1_RE		 	((1<< 0)) // BIT8

#define SW_3W_CMD1_WE		((1<< 1)) // BIT9

#define SW_3W_CMD1_DONE		((1<< 2)) // BIT10

#define SW_3W_CMD1_RE		((1 << 0)) /* BIT8		*/

#define SW_3W_CMD1_WE		((1 << 1)) /* BIT9		*/

#define SW_3W_CMD1_DONE		((1 << 2)) /* BIT10		*/



#define BB_HOST_BANG_RW		(1 << 3)



//----------------------------------------------------------------------------

//       8185B RATE_FALLBACK_CTL bits				(Offset 0xBE, 8bit)

//----------------------------------------------------------------------------

/*

----------------------------------------------------------------------------

		8185B RATE_FALLBACK_CTL bits			(Offset 0xBE, 8bit)

----------------------------------------------------------------------------

*/

#define RATE_FALLBACK_CTL_ENABLE				((1 << 7))

#define RATE_FALLBACK_CTL_ENABLE_RTSCTS		((1 << 6))

// Auto rate fallback per 2^n retry.

/* Auto rate fallback per 2^n retry. */

#define RATE_FALLBACK_CTL_AUTO_STEP0	0x00

#define RATE_FALLBACK_CTL_AUTO_STEP1	0x01

#define RATE_FALLBACK_CTL_AUTO_STEP2	0x02
@@ -537,37 +547,37 @@ 


#define RTL8225z2_ANAPARAM_OFF	0x55480658

#define RTL8225z2_ANAPARAM2_OFF	0x72003f70

//by amy for power save

/* by amy for power save		*/

#define RF_CHANGE_BY_HW BIT30

#define RF_CHANGE_BY_PS BIT29

#define RF_CHANGE_BY_IPS BIT28

//by amy for power save

//by amy for antenna

/* by amy for power save		*/

/* by amy for antenna			*/

#define EEPROM_SW_REVD_OFFSET 0x3f

// BIT[8-9] is for SW Antenna Diversity. Only the value EEPROM_SW_AD_ENABLE means enable, other values are diable.

/*  BIT[8-9] is for SW Antenna Diversity. Only the value EEPROM_SW_AD_ENABLE means enable, other values are diable.					*/

#define EEPROM_SW_AD_MASK			0x0300

#define EEPROM_SW_AD_ENABLE			0x0100



// BIT[10-11] determine if Antenna 1 is the Default Antenna. Only the value EEPROM_DEF_ANT_1 means TRUE, other values are FALSE.

/* BIT[10-11] determine if Antenna 1 is the Default Antenna. Only the value EEPROM_DEF_ANT_1 means TRUE, other values are FALSE.	*/

#define EEPROM_DEF_ANT_MASK			0x0C00

#define EEPROM_DEF_ANT_1			0x0400

//by amy for antenna

//{by amy 080312

//0x7C, 0x7D Crystal calibration and Tx Power tracking mechanism. Added by Roger. 2007.12.10.

/*by amy for antenna																				*/

/* {by amy 080312																					*/

/* 0x7C, 0x7D Crystal calibration and Tx Power tracking mechanism. Added by Roger. 2007.12.10.		*/

#define EEPROM_RSV						0x7C

#define EEPROM_XTAL_CAL_XOUT_MASK	0x0F	// 0x7C[3:0], Crystal calibration for Xout.

#define EEPROM_XTAL_CAL_XIN_MASK		0xF0	// 0x7C[7:4], Crystal calibration for Xin.

#define EEPROM_THERMAL_METER_MASK	0x0F00	// 0x7D[3:0], Thermal meter reference level.

#define EEPROM_XTAL_CAL_ENABLE		0x1000	// 0x7D[4], Crystal calibration enabled/disabled BIT.

#define EEPROM_THERMAL_METER_ENABLE	0x2000	// 0x7D[5], Thermal meter enabled/disabled BIT.

#define EN_LPF_CAL			0x238	// Enable LPF Calibration.

#define EEPROM_XTAL_CAL_XOUT_MASK	0x0F	/* 0x7C[3:0], Crystal calibration for Xout.				*/

#define EEPROM_XTAL_CAL_XIN_MASK		0xF0	/* 0x7C[7:4], Crystal calibration for Xin.			*/

#define EEPROM_THERMAL_METER_MASK	0x0F00	/* 0x7D[3:0], Thermal meter reference level.			*/

#define EEPROM_XTAL_CAL_ENABLE		0x1000	/* 0x7D[4], Crystal calibration enabled/disabled BIT.	*/

#define EEPROM_THERMAL_METER_ENABLE	0x2000	/* 0x7D[5], Thermal meter enabled/disabled BIT.			*/

#define EN_LPF_CAL			0x238	/* Enable LPF Calibration.										*/

#define PWR_METER_EN		BIT1

// <RJ_TODO_8185B> where are false alarm counters in 8185B?

/* <RJ_TODO_8185B> where are false alarm counters in 8185B? */

#define CCK_FALSE_ALARM		0xD0

//by amy 080312}

/* by amy 080312} */



//YJ,add for Country IE, 080630

/* YJ,add for Country IE, 080630 */

#define EEPROM_COUNTRY_CODE  0x2E

//YJ,add,080630,end

/* YJ,add,080630,end */



#endif