Commit 30fe0f9b authored by Kalle Valo's avatar Kalle Valo
Browse files

atmel: move under atmel vendor directory 



Part of reorganising wireless drivers directory and Kconfig.

Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent 30db0ca8

MAINTAINERS

+1 −1
Original line number Diff line number Diff line
@@ -1992,7 +1992,7 @@ L: linux-wireless@vger.kernel.org 
W:	http://www.thekelleys.org.uk/atmel

W:	http://atmelwlandriver.sourceforge.net/

S:	Maintained

F:	drivers/net/wireless/atmel*

F:	drivers/net/wireless/atmel/atmel*



ATMEL MAXTOUCH DRIVER

M:	Nick Dyer <nick.dyer@itdev.co.uk>

drivers/net/wireless/Kconfig

+1 −43
Original line number Diff line number Diff line
@@ -18,6 +18,7 @@ menuconfig WLAN 
if WLAN



source "drivers/net/wireless/admtek/Kconfig"

source "drivers/net/wireless/atmel/Kconfig"

source "drivers/net/wireless/cisco/Kconfig"



config PCMCIA_RAYCS
@@ -54,49 +55,6 @@ config LIBERTAS_THINFIRM_USB 
	---help---

	  A driver for Marvell Libertas 8388 USB devices using thinfirm.



config ATMEL

      tristate "Atmel at76c50x chipset  802.11b support"

      depends on CFG80211 && (PCI || PCMCIA)

      select WIRELESS_EXT

      select WEXT_PRIV

      select FW_LOADER

      select CRC32

       ---help---

        A driver 802.11b wireless cards based on the Atmel fast-vnet

        chips. This driver supports standard Linux wireless extensions.



        Many  cards based on this chipset do not have flash memory

        and need their firmware loaded at start-up. If yours is

        one of these, you will need to provide a firmware image

        to be loaded into the card by the driver. The Atmel

        firmware package can be downloaded from

        <http://www.thekelleys.org.uk/atmel>



config PCI_ATMEL

      tristate "Atmel at76c506 PCI cards"

      depends on ATMEL && PCI

       ---help---

        Enable support for PCI and mini-PCI cards containing the

        Atmel at76c506 chip.



config PCMCIA_ATMEL

	tristate "Atmel at76c502/at76c504 PCMCIA cards"

	depends on ATMEL && PCMCIA

	select WIRELESS_EXT

	select FW_LOADER

	select CRC32

	---help---

	  Enable support for PCMCIA cards containing the

	  Atmel at76c502 and at76c504 chips.



config AT76C50X_USB

        tristate "Atmel at76c503/at76c505/at76c505a USB cards"

        depends on MAC80211 && USB

        select FW_LOADER

        ---help---

          Enable support for USB Wireless devices using Atmel at76c503,

          at76c505 or at76c505a chips.



config PCMCIA_WL3501

	tristate "Planet WL3501 PCMCIA cards"

	depends on CFG80211 && PCMCIA

drivers/net/wireless/Makefile

+1 −6
Original line number Diff line number Diff line
@@ -3,6 +3,7 @@ 
#



obj-$(CONFIG_WLAN_VENDOR_ADMTEK) += admtek/

obj-$(CONFIG_WLAN_VENDOR_ATMEL) += atmel/

obj-$(CONFIG_WLAN_VENDOR_CISCO) += cisco/



obj-$(CONFIG_IPW2100) += ipw2x00/
@@ -10,12 +11,6 @@ obj-$(CONFIG_IPW2200) += ipw2x00/ 


obj-$(CONFIG_HERMES)		+= orinoco/



obj-$(CONFIG_ATMEL)             += atmel.o

obj-$(CONFIG_PCI_ATMEL)         += atmel_pci.o 

obj-$(CONFIG_PCMCIA_ATMEL)      += atmel_cs.o



obj-$(CONFIG_AT76C50X_USB)      += at76c50x-usb.o



obj-$(CONFIG_PRISM54)		+= prism54/



obj-$(CONFIG_HOSTAP)		+= hostap/

drivers/net/wireless/atmel/Kconfig

0 → 100644
+57 −0
Original line number Diff line number Diff line 
config WLAN_VENDOR_ATMEL

	bool "Atmel devices"

	default y

	---help---

	  If you have a wireless card belonging to this class, say Y.



	  Note that the answer to this question doesn't directly affect the

	  kernel: saying N will just cause the configurator to skip all

	  the questions about  cards. If you say Y, you will be asked for

	  your specific card in the following questions.



if WLAN_VENDOR_ATMEL



config ATMEL

      tristate "Atmel at76c50x chipset  802.11b support"

      depends on CFG80211 && (PCI || PCMCIA)

      select WIRELESS_EXT

      select WEXT_PRIV

      select FW_LOADER

      select CRC32

       ---help---

        A driver 802.11b wireless cards based on the Atmel fast-vnet

        chips. This driver supports standard Linux wireless extensions.



        Many  cards based on this chipset do not have flash memory

        and need their firmware loaded at start-up. If yours is

        one of these, you will need to provide a firmware image

        to be loaded into the card by the driver. The Atmel

        firmware package can be downloaded from

        <http://www.thekelleys.org.uk/atmel>



config PCI_ATMEL

      tristate "Atmel at76c506 PCI cards"

      depends on ATMEL && PCI

       ---help---

        Enable support for PCI and mini-PCI cards containing the

        Atmel at76c506 chip.



config PCMCIA_ATMEL

	tristate "Atmel at76c502/at76c504 PCMCIA cards"

	depends on ATMEL && PCMCIA

	select WIRELESS_EXT

	select FW_LOADER

	select CRC32

	---help---

	  Enable support for PCMCIA cards containing the

	  Atmel at76c502 and at76c504 chips.



config AT76C50X_USB

        tristate "Atmel at76c503/at76c505/at76c505a USB cards"

        depends on MAC80211 && USB

        select FW_LOADER

        ---help---

          Enable support for USB Wireless devices using Atmel at76c503,

          at76c505 or at76c505a chips.



endif # WLAN_VENDOR_ATMEL

drivers/net/wireless/atmel/Makefile

0 → 100644
+5 −0
Original line number Diff line number Diff line 
obj-$(CONFIG_ATMEL)             += atmel.o

obj-$(CONFIG_PCI_ATMEL)         += atmel_pci.o 

obj-$(CONFIG_PCMCIA_ATMEL)      += atmel_cs.o



obj-$(CONFIG_AT76C50X_USB)      += at76c50x-usb.o