Loading drivers/net/dsa/mv88e6xxx/chip.c +59 −16 Original line number Diff line number Diff line Loading @@ -632,25 +632,30 @@ static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port, dev_err(ds->dev, "p%d: failed to configure MAC\n", port); } static void mv88e6xxx_mac_link_force(struct dsa_switch *ds, int port, int link) static void mv88e6xxx_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) { struct mv88e6xxx_chip *chip = ds->priv; int err; const struct mv88e6xxx_ops *ops; int err = 0; ops = chip->info->ops; /* Internal PHYs propagate their configuration directly to the MAC. * External PHYs depend on whether the PPU is enabled for this port. * FIXME: we should be using the PPU enable state here. What about * an automedia port? */ if (!mv88e6xxx_phy_is_internal(ds, port) && ops->port_set_link) { mv88e6xxx_reg_lock(chip); err = chip->info->ops->port_set_link(chip, port, link); err = ops->port_set_link(chip, port, LINK_FORCED_DOWN); mv88e6xxx_reg_unlock(chip); if (err) dev_err(chip->dev, "p%d: failed to force MAC link\n", port); dev_err(chip->dev, "p%d: failed to force MAC link down\n", port); } static void mv88e6xxx_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) { if (mode == MLO_AN_FIXED) mv88e6xxx_mac_link_force(ds, port, LINK_FORCED_DOWN); } static void mv88e6xxx_mac_link_up(struct dsa_switch *ds, int port, Loading @@ -659,8 +664,46 @@ static void mv88e6xxx_mac_link_up(struct dsa_switch *ds, int port, int speed, int duplex, bool tx_pause, bool rx_pause) { if (mode == MLO_AN_FIXED) mv88e6xxx_mac_link_force(ds, port, LINK_FORCED_UP); struct mv88e6xxx_chip *chip = ds->priv; const struct mv88e6xxx_ops *ops; int err = 0; ops = chip->info->ops; /* Internal PHYs propagate their configuration directly to the MAC. * External PHYs depend on whether the PPU is enabled for this port. * FIXME: we should be using the PPU enable state here. What about * an automedia port? */ if (!mv88e6xxx_phy_is_internal(ds, port)) { mv88e6xxx_reg_lock(chip); /* FIXME: for an automedia port, should we force the link * down here - what if the link comes up due to "other" media * while we're bringing the port up, how is the exclusivity * handled in the Marvell hardware? E.g. port 4 on 88E6532 * shared between internal PHY and Serdes. */ if (ops->port_set_speed) { err = ops->port_set_speed(chip, port, speed); if (err && err != -EOPNOTSUPP) goto error; } if (ops->port_set_duplex) { err = ops->port_set_duplex(chip, port, duplex); if (err && err != -EOPNOTSUPP) goto error; } if (ops->port_set_link) err = ops->port_set_link(chip, port, LINK_FORCED_UP); error: mv88e6xxx_reg_unlock(chip); if (err && err != -EOPNOTSUPP) dev_err(ds->dev, "p%d: failed to configure MAC link up\n", port); } } static int mv88e6xxx_stats_snapshot(struct mv88e6xxx_chip *chip, int port) Loading Loading
drivers/net/dsa/mv88e6xxx/chip.c +59 −16 Original line number Diff line number Diff line Loading @@ -632,25 +632,30 @@ static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port, dev_err(ds->dev, "p%d: failed to configure MAC\n", port); } static void mv88e6xxx_mac_link_force(struct dsa_switch *ds, int port, int link) static void mv88e6xxx_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) { struct mv88e6xxx_chip *chip = ds->priv; int err; const struct mv88e6xxx_ops *ops; int err = 0; ops = chip->info->ops; /* Internal PHYs propagate their configuration directly to the MAC. * External PHYs depend on whether the PPU is enabled for this port. * FIXME: we should be using the PPU enable state here. What about * an automedia port? */ if (!mv88e6xxx_phy_is_internal(ds, port) && ops->port_set_link) { mv88e6xxx_reg_lock(chip); err = chip->info->ops->port_set_link(chip, port, link); err = ops->port_set_link(chip, port, LINK_FORCED_DOWN); mv88e6xxx_reg_unlock(chip); if (err) dev_err(chip->dev, "p%d: failed to force MAC link\n", port); dev_err(chip->dev, "p%d: failed to force MAC link down\n", port); } static void mv88e6xxx_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) { if (mode == MLO_AN_FIXED) mv88e6xxx_mac_link_force(ds, port, LINK_FORCED_DOWN); } static void mv88e6xxx_mac_link_up(struct dsa_switch *ds, int port, Loading @@ -659,8 +664,46 @@ static void mv88e6xxx_mac_link_up(struct dsa_switch *ds, int port, int speed, int duplex, bool tx_pause, bool rx_pause) { if (mode == MLO_AN_FIXED) mv88e6xxx_mac_link_force(ds, port, LINK_FORCED_UP); struct mv88e6xxx_chip *chip = ds->priv; const struct mv88e6xxx_ops *ops; int err = 0; ops = chip->info->ops; /* Internal PHYs propagate their configuration directly to the MAC. * External PHYs depend on whether the PPU is enabled for this port. * FIXME: we should be using the PPU enable state here. What about * an automedia port? */ if (!mv88e6xxx_phy_is_internal(ds, port)) { mv88e6xxx_reg_lock(chip); /* FIXME: for an automedia port, should we force the link * down here - what if the link comes up due to "other" media * while we're bringing the port up, how is the exclusivity * handled in the Marvell hardware? E.g. port 4 on 88E6532 * shared between internal PHY and Serdes. */ if (ops->port_set_speed) { err = ops->port_set_speed(chip, port, speed); if (err && err != -EOPNOTSUPP) goto error; } if (ops->port_set_duplex) { err = ops->port_set_duplex(chip, port, duplex); if (err && err != -EOPNOTSUPP) goto error; } if (ops->port_set_link) err = ops->port_set_link(chip, port, LINK_FORCED_UP); error: mv88e6xxx_reg_unlock(chip); if (err && err != -EOPNOTSUPP) dev_err(ds->dev, "p%d: failed to configure MAC link up\n", port); } } static int mv88e6xxx_stats_snapshot(struct mv88e6xxx_chip *chip, int port) Loading