Commit 24ce6bc4 authored by Grant Likely's avatar Grant Likely
Browse files

[POWERPC] mpc5200: make dts files conform to generic names recommended practice 



Modify mpc5200 dts files to match Open Firmware's Generic Names recommended
practice.

Signed-off-by: default avatarGrant Likely <grant.likely@secretlab.ca>
parent 66ffbe49

arch/powerpc/boot/dts/cm5200.dts

+27 −31
Original line number Diff line number Diff line
@@ -47,17 +47,14 @@ 
	soc5200@f0000000 {

		#address-cells = <1>;

		#size-cells = <1>;

		model = "fsl,mpc5200b";

		compatible = "fsl,mpc5200b";

		revision = "";			// from bootloader

		device_type = "soc";

		compatible = "fsl,mpc5200b-immr";

		ranges = <0 f0000000 0000c000>;

		reg = <f0000000 00000100>;

		bus-frequency = <0>;		// from bootloader

		system-frequency = <0>;		// from bootloader



		cdm@200 {

			compatible = "mpc5200b-cdm","mpc5200-cdm";

			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";

			reg = <200 38>;

		};
@@ -65,11 +62,11 @@ 
			// 5200 interrupts are encoded into two levels;

			interrupt-controller;

			#interrupt-cells = <3>;

			compatible = "mpc5200b-pic","mpc5200-pic";

			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";

			reg = <500 80>;

		};



		gpt@600 {	// General Purpose Timer

		timer@600 {	// General Purpose Timer

			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";

			reg = <600 10>;

			interrupts = <1 9 0>;
@@ -77,49 +74,49 @@ 
			fsl,has-wdt;

		};



		gpt@610 {	// General Purpose Timer

		timer@610 {	// General Purpose Timer

			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";

			reg = <610 10>;

			interrupts = <1 a 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@620 {	// General Purpose Timer

		timer@620 {	// General Purpose Timer

			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";

			reg = <620 10>;

			interrupts = <1 b 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@630 {	// General Purpose Timer

		timer@630 {	// General Purpose Timer

			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";

			reg = <630 10>;

			interrupts = <1 c 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@640 {	// General Purpose Timer

		timer@640 {	// General Purpose Timer

			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";

			reg = <640 10>;

			interrupts = <1 d 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@650 {	// General Purpose Timer

		timer@650 {	// General Purpose Timer

			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";

			reg = <650 10>;

			interrupts = <1 e 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@660 {	// General Purpose Timer

		timer@660 {	// General Purpose Timer

			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";

			reg = <660 10>;

			interrupts = <1 f 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@670 {	// General Purpose Timer

		timer@670 {	// General Purpose Timer

			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";

			reg = <670 10>;

			interrupts = <1 10 0>;
@@ -127,43 +124,42 @@ 
		};



		rtc@800 {	// Real time clock

			compatible = "mpc5200b-rtc","mpc5200-rtc";

			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";

			reg = <800 100>;

			interrupts = <1 5 0 1 6 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		gpio@b00 {

			compatible = "mpc5200b-gpio","mpc5200-gpio";

			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";

			reg = <b00 40>;

			interrupts = <1 7 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		gpio-wkup@c00 {

			compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup";

		gpio@c00 {

			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";

			reg = <c00 40>;

			interrupts = <1 8 0 0 3 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		spi@f00 {

			compatible = "mpc5200b-spi","mpc5200-spi";

			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";

			reg = <f00 20>;

			interrupts = <2 d 0 2 e 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		usb@1000 {

			device_type = "usb-ohci-be";

			compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be";

			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";

			reg = <1000 ff>;

			interrupts = <2 6 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		dma-controller@1200 {

			compatible = "mpc5200b-bestcomm","mpc5200-bestcomm";

			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";

			reg = <1200 80>;

			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0

			              3 4 0  3 5 0  3 6 0  3 7 0
@@ -173,13 +169,13 @@ 
		};



		xlb@1f00 {

			compatible = "mpc5200b-xlb","mpc5200-xlb";

			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";

			reg = <1f00 100>;

		};



		serial@2000 {		// PSC1

			device_type = "serial";

			compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";

			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";

			port-number = <0>;  // Logical port assignment

			reg = <2000 100>;

			interrupts = <2 1 0>;
@@ -188,7 +184,7 @@ 


		serial@2200 {		// PSC2

			device_type = "serial";

			compatible = "mpc5200-psc-uart";

			compatible = "fsl,mpc5200-psc-uart";

			port-number = <1>;  // Logical port assignment

			reg = <2200 100>;

			interrupts = <2 2 0>;
@@ -197,7 +193,7 @@ 


		serial@2400 {		// PSC3

			device_type = "serial";

			compatible = "mpc5200-psc-uart";

			compatible = "fsl,mpc5200-psc-uart";

			port-number = <2>;  // Logical port assignment

			reg = <2400 100>;

			interrupts = <2 3 0>;
@@ -206,7 +202,7 @@ 


		serial@2c00 {		// PSC6

			device_type = "serial";

			compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";

			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";

			port-number = <5>;  // Logical port assignment

			reg = <2c00 100>;

			interrupts = <2 4 0>;
@@ -215,15 +211,15 @@ 


		ethernet@3000 {

			device_type = "network";

			compatible = "mpc5200b-fec","mpc5200-fec";

			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";

			reg = <3000 800>;

			local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */

			local-mac-address = [ 00 00 00 00 00 00 ];

			interrupts = <2 5 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		i2c@3d40 {

			compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";

			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";

			reg = <3d40 40>;

			interrupts = <2 10 0>;

			interrupt-parent = <&mpc5200_pic>;
@@ -231,7 +227,7 @@ 
		};



		sram@8000 {

			compatible = "mpc5200b-sram","mpc5200-sram";

			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";

			reg = <8000 4000>;

		};

	};

arch/powerpc/boot/dts/lite5200.dts

+38 −56
Original line number Diff line number Diff line
@@ -10,15 +10,8 @@ 
 * option) any later version.

 */



/*

 * WARNING: Do not depend on this tree layout remaining static just yet.

 * The MPC5200 device tree conventions are still in flux

 * Keep an eye on the linuxppc-dev mailing list for more details

 */



/ {

	model = "fsl,lite5200";

	// revision = "1.0";

	compatible = "fsl,lite5200";

	#address-cells = <1>;

	#size-cells = <1>;
@@ -48,30 +41,27 @@ 
	soc5200@f0000000 {

		#address-cells = <1>;

		#size-cells = <1>;

		model = "fsl,mpc5200";

		compatible = "mpc5200";

		revision = "";			// from bootloader

		device_type = "soc";

		compatible = "fsl,mpc5200-immr";

		ranges = <0 f0000000 0000c000>;

		reg = <f0000000 00000100>;

		bus-frequency = <0>;		// from bootloader

		system-frequency = <0>;		// from bootloader



		cdm@200 {

			compatible = "mpc5200-cdm";

			compatible = "fsl,mpc5200-cdm";

			reg = <200 38>;

		};



		mpc5200_pic: pic@500 {

		mpc5200_pic: interrupt-controller@500 {

			// 5200 interrupts are encoded into two levels;

			interrupt-controller;

			#interrupt-cells = <3>;

			device_type = "interrupt-controller";

			compatible = "mpc5200-pic";

			compatible = "fsl,mpc5200-pic";

			reg = <500 80>;

		};



		gpt@600 {	// General Purpose Timer

		timer@600 {	// General Purpose Timer

			compatible = "fsl,mpc5200-gpt";

			cell-index = <0>;

			reg = <600 10>;
@@ -80,7 +70,7 @@ 
			fsl,has-wdt;

		};



		gpt@610 {	// General Purpose Timer

		timer@610 {	// General Purpose Timer

			compatible = "fsl,mpc5200-gpt";

			cell-index = <1>;

			reg = <610 10>;
@@ -88,7 +78,7 @@ 
			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@620 {	// General Purpose Timer

		timer@620 {	// General Purpose Timer

			compatible = "fsl,mpc5200-gpt";

			cell-index = <2>;

			reg = <620 10>;
@@ -96,7 +86,7 @@ 
			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@630 {	// General Purpose Timer

		timer@630 {	// General Purpose Timer

			compatible = "fsl,mpc5200-gpt";

			cell-index = <3>;

			reg = <630 10>;
@@ -104,7 +94,7 @@ 
			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@640 {	// General Purpose Timer

		timer@640 {	// General Purpose Timer

			compatible = "fsl,mpc5200-gpt";

			cell-index = <4>;

			reg = <640 10>;
@@ -112,7 +102,7 @@ 
			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@650 {	// General Purpose Timer

		timer@650 {	// General Purpose Timer

			compatible = "fsl,mpc5200-gpt";

			cell-index = <5>;

			reg = <650 10>;
@@ -120,7 +110,7 @@ 
			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@660 {	// General Purpose Timer

		timer@660 {	// General Purpose Timer

			compatible = "fsl,mpc5200-gpt";

			cell-index = <6>;

			reg = <660 10>;
@@ -128,7 +118,7 @@ 
			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@670 {	// General Purpose Timer

		timer@670 {	// General Purpose Timer

			compatible = "fsl,mpc5200-gpt";

			cell-index = <7>;

			reg = <670 10>;
@@ -137,25 +127,23 @@ 
		};



		rtc@800 {	// Real time clock

			compatible = "mpc5200-rtc";

			compatible = "fsl,mpc5200-rtc";

			device_type = "rtc";

			reg = <800 100>;

			interrupts = <1 5 0 1 6 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		mscan@900 {

			device_type = "mscan";

			compatible = "mpc5200-mscan";

		can@900 {

			compatible = "fsl,mpc5200-mscan";

			cell-index = <0>;

			interrupts = <2 11 0>;

			interrupt-parent = <&mpc5200_pic>;

			reg = <900 80>;

		};



		mscan@980 {

			device_type = "mscan";

			compatible = "mpc5200-mscan";

		can@980 {

			compatible = "fsl,mpc5200-mscan";

			cell-index = <1>;

			interrupts = <2 12 0>;

			interrupt-parent = <&mpc5200_pic>;
@@ -163,38 +151,36 @@ 
		};



		gpio@b00 {

			compatible = "mpc5200-gpio";

			compatible = "fsl,mpc5200-gpio";

			reg = <b00 40>;

			interrupts = <1 7 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		gpio-wkup@c00 {

			compatible = "mpc5200-gpio-wkup";

		gpio@c00 {

			compatible = "fsl,mpc5200-gpio-wkup";

			reg = <c00 40>;

			interrupts = <1 8 0 0 3 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		spi@f00 {

			device_type = "spi";

			compatible = "mpc5200-spi";

			compatible = "fsl,mpc5200-spi";

			reg = <f00 20>;

			interrupts = <2 d 0 2 e 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		usb@1000 {

			device_type = "usb-ohci-be";

			compatible = "mpc5200-ohci","ohci-be";

			compatible = "fsl,mpc5200-ohci","ohci-be";

			reg = <1000 ff>;

			interrupts = <2 6 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		bestcomm@1200 {

		dma-controller@1200 {

			device_type = "dma-controller";

			compatible = "mpc5200-bestcomm";

			compatible = "fsl,mpc5200-bestcomm";

			reg = <1200 80>;

			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0

			              3 4 0  3 5 0  3 6 0  3 7 0
@@ -204,13 +190,13 @@ 
		};



		xlb@1f00 {

			compatible = "mpc5200-xlb";

			compatible = "fsl,mpc5200-xlb";

			reg = <1f00 100>;

		};



		serial@2000 {		// PSC1

			device_type = "serial";

			compatible = "mpc5200-psc-uart";

			compatible = "fsl,mpc5200-psc-uart";

			port-number = <0>;  // Logical port assignment

			cell-index = <0>;

			reg = <2000 100>;
@@ -220,8 +206,7 @@ 


		// PSC2 in ac97 mode example

		//ac97@2200 {		// PSC2

		//	device_type = "sound";

		//	compatible = "mpc5200-psc-ac97";

		//	compatible = "fsl,mpc5200-psc-ac97";

		//	cell-index = <1>;

		//	reg = <2200 100>;

		//	interrupts = <2 2 0>;
@@ -230,8 +215,7 @@ 


		// PSC3 in CODEC mode example

		//i2s@2400 {		// PSC3

		//	device_type = "sound";

		//	compatible = "mpc5200-psc-i2s";

		//	compatible = "fsl,mpc5200-psc-i2s";

		//	cell-index = <2>;

		//	reg = <2400 100>;

		//	interrupts = <2 3 0>;
@@ -241,7 +225,7 @@ 
		// PSC4 in uart mode example

		//serial@2600 {		// PSC4

		//	device_type = "serial";

		//	compatible = "mpc5200-psc-uart";

		//	compatible = "fsl,mpc5200-psc-uart";

		//	cell-index = <3>;

		//	reg = <2600 100>;

		//	interrupts = <2 b 0>;
@@ -251,7 +235,7 @@ 
		// PSC5 in uart mode example

		//serial@2800 {		// PSC5

		//	device_type = "serial";

		//	compatible = "mpc5200-psc-uart";

		//	compatible = "fsl,mpc5200-psc-uart";

		//	cell-index = <4>;

		//	reg = <2800 100>;

		//	interrupts = <2 c 0>;
@@ -260,8 +244,7 @@ 


		// PSC6 in spi mode example

		//spi@2c00 {		// PSC6

		//	device_type = "spi";

		//	compatible = "mpc5200-psc-spi";

		//	compatible = "fsl,mpc5200-psc-spi";

		//	cell-index = <5>;

		//	reg = <2c00 100>;

		//	interrupts = <2 4 0>;
@@ -270,16 +253,16 @@ 


		ethernet@3000 {

			device_type = "network";

			compatible = "mpc5200-fec";

			compatible = "fsl,mpc5200-fec";

			reg = <3000 800>;

			mac-address = [ 02 03 04 05 06 07 ]; // Bad!

			local-mac-address = [ 00 00 00 00 00 00 ];

			interrupts = <2 5 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		ata@3a00 {

			device_type = "ata";

			compatible = "mpc5200-ata";

			compatible = "fsl,mpc5200-ata";

			reg = <3a00 100>;

			interrupts = <2 7 0>;

			interrupt-parent = <&mpc5200_pic>;
@@ -288,7 +271,7 @@ 
		i2c@3d00 {

			#address-cells = <1>;

			#size-cells = <0>;

			compatible = "mpc5200-i2c","fsl-i2c";

			compatible = "fsl,mpc5200-i2c","fsl-i2c";

			cell-index = <0>;

			reg = <3d00 40>;

			interrupts = <2 f 0>;
@@ -299,7 +282,7 @@ 
		i2c@3d40 {

			#address-cells = <1>;

			#size-cells = <0>;

			compatible = "mpc5200-i2c","fsl-i2c";

			compatible = "fsl,mpc5200-i2c","fsl-i2c";

			cell-index = <1>;

			reg = <3d40 40>;

			interrupts = <2 10 0>;
@@ -307,8 +290,7 @@ 
			fsl5200-clocking;

		};

		sram@8000 {

			device_type = "sram";

			compatible = "mpc5200-sram","sram";

			compatible = "fsl,mpc5200-sram","sram";

			reg = <8000 4000>;

		};

	};
@@ -318,7 +300,7 @@ 
		#size-cells = <2>;

		#address-cells = <3>;

		device_type = "pci";

		compatible = "mpc5200-pci";

		compatible = "fsl,mpc5200-pci";

		reg = <f0000d00 100>;

		interrupt-map-mask = <f800 0 0 7>;

		interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3

arch/powerpc/boot/dts/lite5200b.dts

+39 −52
Original line number Diff line number Diff line
@@ -18,7 +18,6 @@ 


/ {

	model = "fsl,lite5200b";

	// revision = "1.0";

	compatible = "fsl,lite5200b";

	#address-cells = <1>;

	#size-cells = <1>;
@@ -48,30 +47,27 @@ 
	soc5200@f0000000 {

		#address-cells = <1>;

		#size-cells = <1>;

		model = "fsl,mpc5200b";

		compatible = "mpc5200";

		revision = "";			// from bootloader

		device_type = "soc";

		compatible = "fsl,mpc5200b-immr";

		ranges = <0 f0000000 0000c000>;

		reg = <f0000000 00000100>;

		bus-frequency = <0>;		// from bootloader

		system-frequency = <0>;		// from bootloader



		cdm@200 {

			compatible = "mpc5200b-cdm","mpc5200-cdm";

			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";

			reg = <200 38>;

		};



		mpc5200_pic: pic@500 {

		mpc5200_pic: interrupt-controller@500 {

			// 5200 interrupts are encoded into two levels;

			interrupt-controller;

			#interrupt-cells = <3>;

			device_type = "interrupt-controller";

			compatible = "mpc5200b-pic","mpc5200-pic";

			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";

			reg = <500 80>;

		};



		gpt@600 {	// General Purpose Timer

		timer@600 {	// General Purpose Timer

			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";

			cell-index = <0>;

			reg = <600 10>;
@@ -80,7 +76,7 @@ 
			fsl,has-wdt;

		};



		gpt@610 {	// General Purpose Timer

		timer@610 {	// General Purpose Timer

			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";

			cell-index = <1>;

			reg = <610 10>;
@@ -88,7 +84,7 @@ 
			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@620 {	// General Purpose Timer

		timer@620 {	// General Purpose Timer

			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";

			cell-index = <2>;

			reg = <620 10>;
@@ -96,7 +92,7 @@ 
			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@630 {	// General Purpose Timer

		timer@630 {	// General Purpose Timer

			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";

			cell-index = <3>;

			reg = <630 10>;
@@ -104,7 +100,7 @@ 
			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@640 {	// General Purpose Timer

		timer@640 {	// General Purpose Timer

			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";

			cell-index = <4>;

			reg = <640 10>;
@@ -112,7 +108,7 @@ 
			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@650 {	// General Purpose Timer

		timer@650 {	// General Purpose Timer

			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";

			cell-index = <5>;

			reg = <650 10>;
@@ -120,7 +116,7 @@ 
			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@660 {	// General Purpose Timer

		timer@660 {	// General Purpose Timer

			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";

			cell-index = <6>;

			reg = <660 10>;
@@ -128,7 +124,7 @@ 
			interrupt-parent = <&mpc5200_pic>;

		};



		gpt@670 {	// General Purpose Timer

		timer@670 {	// General Purpose Timer

			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";

			cell-index = <7>;

			reg = <670 10>;
@@ -137,25 +133,23 @@ 
		};



		rtc@800 {	// Real time clock

			compatible = "mpc5200b-rtc","mpc5200-rtc";

			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";

			device_type = "rtc";

			reg = <800 100>;

			interrupts = <1 5 0 1 6 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		mscan@900 {

			device_type = "mscan";

			compatible = "mpc5200b-mscan","mpc5200-mscan";

		can@900 {

			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";

			cell-index = <0>;

			interrupts = <2 11 0>;

			interrupt-parent = <&mpc5200_pic>;

			reg = <900 80>;

		};



		mscan@980 {

			device_type = "mscan";

			compatible = "mpc5200b-mscan","mpc5200-mscan";

		can@980 {

			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";

			cell-index = <1>;

			interrupts = <2 12 0>;

			interrupt-parent = <&mpc5200_pic>;
@@ -163,38 +157,36 @@ 
		};



		gpio@b00 {

			compatible = "mpc5200b-gpio","mpc5200-gpio";

			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";

			reg = <b00 40>;

			interrupts = <1 7 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		gpio-wkup@c00 {

			compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup";

		gpio@c00 {

			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";

			reg = <c00 40>;

			interrupts = <1 8 0 0 3 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		spi@f00 {

			device_type = "spi";

			compatible = "mpc5200b-spi","mpc5200-spi";

			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";

			reg = <f00 20>;

			interrupts = <2 d 0 2 e 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		usb@1000 {

			device_type = "usb-ohci-be";

			compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be";

			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";

			reg = <1000 ff>;

			interrupts = <2 6 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		bestcomm@1200 {

		dma-controller@1200 {

			device_type = "dma-controller";

			compatible = "mpc5200b-bestcomm","mpc5200-bestcomm";

			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";

			reg = <1200 80>;

			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0

			              3 4 0  3 5 0  3 6 0  3 7 0
@@ -204,13 +196,13 @@ 
		};



		xlb@1f00 {

			compatible = "mpc5200b-xlb","mpc5200-xlb";

			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";

			reg = <1f00 100>;

		};



		serial@2000 {		// PSC1

			device_type = "serial";

			compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";

			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";

			port-number = <0>;  // Logical port assignment

			cell-index = <0>;

			reg = <2000 100>;
@@ -220,8 +212,7 @@ 


		// PSC2 in ac97 mode example

		//ac97@2200 {		// PSC2

		//	device_type = "sound";

		//	compatible = "mpc5200b-psc-ac97","mpc5200-psc-ac97";

		//	compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";

		//	cell-index = <1>;

		//	reg = <2200 100>;

		//	interrupts = <2 2 0>;
@@ -230,8 +221,7 @@ 


		// PSC3 in CODEC mode example

		//i2s@2400 {		// PSC3

		//	device_type = "sound";

		//	compatible = "mpc5200b-psc-i2s"; //not 5200 compatible

		//	compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible

		//	cell-index = <2>;

		//	reg = <2400 100>;

		//	interrupts = <2 3 0>;
@@ -241,7 +231,7 @@ 
		// PSC4 in uart mode example

		//serial@2600 {		// PSC4

		//	device_type = "serial";

		//	compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";

		//	compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";

		//	cell-index = <3>;

		//	reg = <2600 100>;

		//	interrupts = <2 b 0>;
@@ -251,7 +241,7 @@ 
		// PSC5 in uart mode example

		//serial@2800 {		// PSC5

		//	device_type = "serial";

		//	compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";

		//	compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";

		//	cell-index = <4>;

		//	reg = <2800 100>;

		//	interrupts = <2 c 0>;
@@ -260,8 +250,7 @@ 


		// PSC6 in spi mode example

		//spi@2c00 {		// PSC6

		//	device_type = "spi";

		//	compatible = "mpc5200b-psc-spi","mpc5200-psc-spi";

		//	compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";

		//	cell-index = <5>;

		//	reg = <2c00 100>;

		//	interrupts = <2 4 0>;
@@ -270,9 +259,9 @@ 


		ethernet@3000 {

			device_type = "network";

			compatible = "mpc5200b-fec","mpc5200-fec";

			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";

			reg = <3000 400>;

			mac-address = [ 02 03 04 05 06 07 ]; // Bad!

			local-mac-address = [ 00 00 00 00 00 00 ];

			interrupts = <2 5 0>;

			interrupt-parent = <&mpc5200_pic>;

			phy-handle = <&phy0>;
@@ -281,8 +270,7 @@ 
		mdio@3000 {

			#address-cells = <1>;

			#size-cells = <0>;

			device_type = "mdio";

			compatible = "mpc5200b-fec-phy";

			compatible = "fsl,mpc5200b-mdio";

			reg = <3000 400>;	// fec range, since we need to setup fec interrupts

			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.

			interrupt-parent = <&mpc5200_pic>;
@@ -295,7 +283,7 @@ 


		ata@3a00 {

			device_type = "ata";

			compatible = "mpc5200b-ata","mpc5200-ata";

			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";

			reg = <3a00 100>;

			interrupts = <2 7 0>;

			interrupt-parent = <&mpc5200_pic>;
@@ -304,7 +292,7 @@ 
		i2c@3d00 {

			#address-cells = <1>;

			#size-cells = <0>;

			compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";

			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";

			cell-index = <0>;

			reg = <3d00 40>;

			interrupts = <2 f 0>;
@@ -315,7 +303,7 @@ 
		i2c@3d40 {

			#address-cells = <1>;

			#size-cells = <0>;

			compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";

			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";

			cell-index = <1>;

			reg = <3d40 40>;

			interrupts = <2 10 0>;
@@ -323,8 +311,7 @@ 
			fsl5200-clocking;

		};

		sram@8000 {

			device_type = "sram";

			compatible = "mpc5200b-sram","mpc5200-sram","sram";

			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram";

			reg = <8000 4000>;

		};

	};
@@ -334,7 +321,7 @@ 
		#size-cells = <2>;

		#address-cells = <3>;

		device_type = "pci";

		compatible = "mpc5200b-pci","mpc5200-pci";

		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";

		reg = <f0000d00 100>;

		interrupt-map-mask = <f800 0 0 7>;

		interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot

arch/powerpc/boot/dts/motionpro.dts

+28 −38

File changed.

Preview size limit exceeded, changes collapsed.

arch/powerpc/boot/dts/tqm5200.dts

+17 −26
Original line number Diff line number Diff line
@@ -10,12 +10,6 @@ 
 * option) any later version.

 */



/*

 * WARNING: Do not depend on this tree layout remaining static just yet.

 * The MPC5200 device tree conventions are still in flux

 * Keep an eye on the linuxppc-dev mailing list for more details

 */



/ {

	model = "tqc,tqm5200";

	compatible = "tqc,tqm5200";
@@ -47,29 +41,26 @@ 
	soc5200@f0000000 {

		#address-cells = <1>;

		#size-cells = <1>;

		model = "fsl,mpc5200";

		compatible = "fsl,mpc5200";

		revision = "";			// from bootloader

		device_type = "soc";

		compatible = "fsl,mpc5200-immr";

		ranges = <0 f0000000 0000c000>;

		reg = <f0000000 00000100>;

		bus-frequency = <0>;		// from bootloader

		system-frequency = <0>;		// from bootloader



		cdm@200 {

			compatible = "mpc5200-cdm";

			compatible = "fsl,mpc5200-cdm";

			reg = <200 38>;

		};



		mpc5200_pic: pic@500 {

		mpc5200_pic: interrupt-controller@500 {

			// 5200 interrupts are encoded into two levels;

			interrupt-controller;

			#interrupt-cells = <3>;

			compatible = "mpc5200-pic";

			compatible = "fsl,mpc5200-pic";

			reg = <500 80>;

		};



		gpt@600 {	// General Purpose Timer

		timer@600 {	// General Purpose Timer

			compatible = "fsl,mpc5200-gpt";

			reg = <600 10>;

			interrupts = <1 9 0>;
@@ -78,21 +69,21 @@ 
		};



		gpio@b00 {

			compatible = "mpc5200-gpio";

			compatible = "fsl,mpc5200-gpio";

			reg = <b00 40>;

			interrupts = <1 7 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		usb@1000 {

			compatible = "mpc5200-ohci","ohci-be";

			compatible = "fsl,mpc5200-ohci","ohci-be";

			reg = <1000 ff>;

			interrupts = <2 6 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		dma-controller@1200 {

			compatible = "mpc5200-bestcomm";

			compatible = "fsl,mpc5200-bestcomm";

			reg = <1200 80>;

			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0

			              3 4 0  3 5 0  3 6 0  3 7 0
@@ -102,13 +93,13 @@ 
		};



		xlb@1f00 {

			compatible = "mpc5200-xlb";

			compatible = "fsl,mpc5200-xlb";

			reg = <1f00 100>;

		};



		serial@2000 {		// PSC1

			device_type = "serial";

			compatible = "mpc5200-psc-uart";

			compatible = "fsl,mpc5200-psc-uart";

			port-number = <0>;  // Logical port assignment

			reg = <2000 100>;

			interrupts = <2 1 0>;
@@ -117,7 +108,7 @@ 


		serial@2200 {		// PSC2

			device_type = "serial";

			compatible = "mpc5200-psc-uart";

			compatible = "fsl,mpc5200-psc-uart";

			port-number = <1>;  // Logical port assignment

			reg = <2200 100>;

			interrupts = <2 2 0>;
@@ -126,7 +117,7 @@ 


		serial@2400 {		// PSC3

			device_type = "serial";

			compatible = "mpc5200-psc-uart";

			compatible = "fsl,mpc5200-psc-uart";

			port-number = <2>;  // Logical port assignment

			reg = <2400 100>;

			interrupts = <2 3 0>;
@@ -135,22 +126,22 @@ 


		ethernet@3000 {

			device_type = "network";

			compatible = "mpc5200-fec";

			compatible = "fsl,mpc5200-fec";

			reg = <3000 800>;

			local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */

			local-mac-address = [ 00 00 00 00 00 00 ];

			interrupts = <2 5 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		ata@3a00 {

			compatible = "mpc5200-ata";

			compatible = "fsl,mpc5200-ata";

			reg = <3a00 100>;

			interrupts = <2 7 0>;

			interrupt-parent = <&mpc5200_pic>;

		};



		i2c@3d40 {

			compatible = "mpc5200-i2c","fsl-i2c";

			compatible = "fsl,mpc5200-i2c","fsl-i2c";

			reg = <3d40 40>;

			interrupts = <2 10 0>;

			interrupt-parent = <&mpc5200_pic>;
@@ -158,7 +149,7 @@ 
		};



		sram@8000 {

			compatible = "mpc5200-sram";

			compatible = "fsl,mpc5200-sram";

			reg = <8000 4000>;

		};

	};