Commit 2480a2a8 authored by John Garry's avatar John Garry Committed by Zheng Zengkai
Browse files

scsi: hisi_sas: Fix rescan after deleting a disk 

mainline inclusion
from mainline-v5.19-rc1
commit e9dedc13
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WRGD
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e9dedc13bb11

----------------------------------------------------------------------

Removing an ATA device via sysfs means that the device may not be found
through re-scanning:

root@ubuntu:/home/john# lsscsi
[0:0:0:0] disk SanDisk LT0200MO P404 /dev/sda
[0:0:1:0] disk ATA HGST HUS724040AL A8B0 /dev/sdb
[0:0:8:0] enclosu 12G SAS Expander RevB -
root@ubuntu:/home/john# echo 1 > /sys/block/sdb/device/delete
root@ubuntu:/home/john# echo "- - -" > /sys/class/scsi_host/host0/scan
root@ubuntu:/home/john# lsscsi
[0:0:0:0] disk SanDisk LT0200MO P404 /dev/sda
[0:0:8:0] enclosu 12G SAS Expander RevB -
root@ubuntu:/home/john#

The problem is that the rescan of the device may conflict with the device
in being re-initialized, as follows:

 - In the rescan we call hisi_sas_slave_alloc() in store_scan() ->
   sas_user_scan() -> [__]scsi_scan_target() -> scsi_probe_and_add_lunc()
   -> scsi_alloc_sdev() -> hisi_sas_slave_alloc() -> hisi_sas_init_device()
   In hisi_sas_init_device() we issue an IT nexus reset for ATA devices

 - That IT nexus causes the remote PHY to go down and this triggers a bcast
   event

 - In parallel libsas processes the bcast event, finds that the phy is down
   and marks the device as gone

The hard reset issued in hisi_sas_init_device() is unncessary - as
described in the code comment - so remove it. Also set dev status as
HISI_SAS_DEV_NORMAL as the hisi_sas_init_device() call.

Link: https://lore.kernel.org/r/1652354134-171343-4-git-send-email-john.garry@huawei.com


Fixes: 36c6b761 ("scsi: hisi_sas: Initialise devices in .slave_alloc callback")
Tested-by: default avatarYihang Li <liyihang6@hisilicon.com>
Reviewed-by: default avatarXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: default avatarJohn Garry <john.garry@huawei.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: default avatarxiabing <xiabing12@h-partners.com>
Reviewed-by: default avatarJason Yan <yanaijie@huawei.com>
Signed-off-by: default avatarZheng Zengkai <zhengzengkai@huawei.com>
parent 09887c39

drivers/scsi/hisi_sas/hisi_sas_main.c

+18 −29
Original line number Diff line number Diff line
@@ -691,8 +691,6 @@ static int hisi_sas_init_device(struct domain_device *device) 
	struct hisi_sas_tmf_task tmf_task;

	int retry = HISI_SAS_DISK_RECOVER_CNT;

	struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);

	struct device *dev = hisi_hba->dev;

	struct sas_phy *local_phy;



	switch (device->dev_type) {

	case SAS_END_DEVICE:
@@ -713,30 +711,18 @@ static int hisi_sas_init_device(struct domain_device *device) 
	case SAS_SATA_PM_PORT:

	case SAS_SATA_PENDING:

		/*

		 * send HARD RESET to clear previous affiliation of

		 * STP target port

		 * If an expander is swapped when a SATA disk is attached then

		 * we should issue a hard reset to clear previous affiliation

		 * of STP target port, see SPL (chapter 6.19.4).

		 *

		 * However we don't need to issue a hard reset here for these

		 * reasons:

		 * a. When probing the device, libsas/libata already issues a

		 * hard reset in sas_probe_sata() -> ata_sas_async_probe().

		 * Note that in hisi_sas_debug_I_T_nexus_reset() we take care

		 * to issue a hard reset by checking the dev status (== INIT).

		 * b. When resetting the controller, this is simply unnecessary.

		 */

		local_phy = sas_get_local_phy(device);

		if (!scsi_is_sas_phy_local(local_phy) &&

		    !test_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags)) {

			unsigned long deadline = ata_deadline(jiffies, 20000);

			struct sata_device *sata_dev = &device->sata_dev;

			struct ata_host *ata_host = sata_dev->ata_host;

			struct ata_port_operations *ops = ata_host->ops;

			struct ata_port *ap = sata_dev->ap;

			struct ata_link *link;

			unsigned int classes;



			ata_for_each_link(link, ap, EDGE)

				rc = ops->hardreset(link, &classes,

						    deadline);

		}

		sas_put_local_phy(local_phy);

		if (rc) {

			dev_warn(dev, "SATA disk hardreset fail: %d\n", rc);

			return rc;

		}



		while (retry-- > 0) {

			rc = hisi_sas_softreset_ata_disk(device);

			if (!rc)
@@ -752,15 +738,19 @@ static int hisi_sas_init_device(struct domain_device *device) 


int hisi_sas_slave_alloc(struct scsi_device *sdev)

{

	struct domain_device *ddev;

	struct domain_device *ddev = sdev_to_domain_dev(sdev);

	struct hisi_sas_device *sas_dev = ddev->lldd_dev;

	int rc;



	rc = sas_slave_alloc(sdev);

	if (rc)

		return rc;

	ddev = sdev_to_domain_dev(sdev);



	return hisi_sas_init_device(ddev);

	rc = hisi_sas_init_device(ddev);

	if (rc)

		return rc;

	sas_dev->dev_status = HISI_SAS_DEV_NORMAL;

	return 0;

}

EXPORT_SYMBOL_GPL(hisi_sas_slave_alloc);
@@ -810,7 +800,6 @@ static int hisi_sas_dev_found(struct domain_device *device) 
	dev_info(dev, "dev[%d:%x] found\n",

		sas_dev->device_id, sas_dev->dev_type);



	sas_dev->dev_status = HISI_SAS_DEV_NORMAL;

	return 0;



err_out: