Commit 24645034 authored by Jagan Teki's avatar Jagan Teki Committed by Heiko Stuebner
Browse files

arm64: dts: rockchip: rk3399: Radxa ROCK 4C+ 



Add support for Radxa ROCK 4C+ SBC.

Key differences of 4C+ compared to previous ROCK Pi 4.
- Rockchip RK3399-T SoC
- DP from 4C replaced with micro HDMI 2K@60fps
- 4-lane MIPI DSI with 1920*1080
- RK817 Audio codec

Also, an official naming convention from Radxa mention to remove
Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not
Radxa ROCK Pi 4C+.

Signed-off-by: default avatarStephen Chen <stephen@radxa.com>
Signed-off-by: default avatarManoj Sai <abbaraju.manojsai@amarulasolutions.com>
Signed-off-by: default avatarJagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220902065057.97425-3-jagan@amarulasolutions.com
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 9176ba91

arch/arm64/boot/dts/rockchip/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -48,6 +48,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb 
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb

dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb

dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-plus.dtb

dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-4c-plus.dtb

dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb

dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a-plus.dtb

dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb

arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts

0 → 100644
+646 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/*

 * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd

 * Copyright (c) 2019 Radxa Limited

 * Copyright (c) 2022 Amarula Solutions(India)

 */



/dts-v1/;

#include "rk3399.dtsi"

#include "rk3399-t-opp.dtsi"



/ {

	model = "Radxa ROCK 4C+";

	compatible = "radxa,rock-4c-plus", "rockchip,rk3399";



	aliases {

		mmc0 = &sdmmc;

		mmc1 = &sdhci;

	};



	chosen {

		stdout-path = "serial2:1500000n8";

	};



	sdio_pwrseq: sdio-pwrseq {

		compatible = "mmc-pwrseq-simple";

		clocks = <&rk809 1>;

		clock-names = "ext_clock";

		pinctrl-names = "default";

		pinctrl-0 = <&wifi_enable_h>;

		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;

	};



	clkin_gmac: external-gmac-clock {

		compatible = "fixed-clock";

		clock-frequency = <125000000>;

		clock-output-names = "clkin_gmac";

		#clock-cells = <0>;

	};



	vcc5v0_sys: vcc5v0-sys-regulator {

		compatible = "regulator-fixed";

		regulator-name = "vcc5v0_sys";

		regulator-always-on;

		regulator-boot-on;

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

	};



	vcc5v0_host1: vcc5v0-host-regulator {

		compatible = "regulator-fixed";

		enable-active-high;

		gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&vcc5v0_host_en>;

		regulator-name = "vcc5v0_host1";

		regulator-always-on;

		regulator-boot-on;

		vin-supply = <&vcc5v0_host0_s0>;

	};



	vcc5v0_typec: vcc5v0-typec-regulator {

		compatible = "regulator-fixed";

		enable-active-high;

		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&vcc5v0_typec0_en>;

		regulator-name = "vcc5v0_typec";

		regulator-always-on;

		regulator-boot-on;

		vin-supply = <&vcc5v0_sys>;

	};



	vcc_lan: vcc3v3-phy-regulator {

		compatible = "regulator-fixed";

		regulator-name = "vcc_lan";

		regulator-always-on;

		regulator-boot-on;

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

	};

};



&cpu_l0 {

	cpu-supply = <&vdd_cpu_l>;

};



&cpu_l1 {

	cpu-supply = <&vdd_cpu_l>;

};



&cpu_l2 {

	cpu-supply = <&vdd_cpu_l>;

};



&cpu_l3 {

	cpu-supply = <&vdd_cpu_l>;

};



&cpu_b0 {

	cpu-supply = <&vdd_cpu_b>;

};



&cpu_b1 {

	cpu-supply = <&vdd_cpu_b>;

};



&emmc_phy {

	status = "okay";

};



&gmac {

	assigned-clocks = <&cru SCLK_RMII_SRC>;

	assigned-clock-parents = <&clkin_gmac>;

	clock_in_out = "input";

	phy-supply = <&vcc_lan>;

	phy-mode = "rgmii";

	pinctrl-names = "default";

	pinctrl-0 = <&rgmii_pins>;

	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;

	snps,reset-active-low;

	snps,reset-delays-us = <0 10000 50000>;

	tx_delay = <0x2a>;

	rx_delay = <0x21>;

	status = "okay";

};



&gpu {

	mali-supply = <&vdd_gpu>;

	status = "okay";

};



&hdmi {

	ddc-i2c-bus = <&i2c3>;

	pinctrl-names = "default";

	pinctrl-0 = <&hdmi_cec>;

	status = "okay";

};



&hdmi_sound {

	status = "okay";

};



&i2c0 {

	status = "okay";

	i2c-scl-falling-time-ns = <30>;

	i2c-scl-rising-time-ns = <180>;

	clock-frequency = <400000>;



	rk809: pmic@20 {

		compatible = "rockchip,rk809";

		reg = <0x20>;

		interrupt-parent = <&gpio1>;

		interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;

		#clock-cells = <1>;

		clock-output-names = "rk808-clkout1", "rk808-clkout2";

		pinctrl-names = "default";

		pinctrl-0 = <&pmic_int_l>;

		rockchip,system-power-controller;

		wakeup-source;



		vcc1-supply = <&vcc5v0_sys>;

		vcc2-supply = <&vcc5v0_sys>;

		vcc3-supply = <&vcc5v0_sys>;

		vcc4-supply = <&vcc5v0_sys>;

		vcc5-supply = <&vcc_buck5>;

		vcc6-supply = <&vcc_buck5>;

		vcc7-supply = <&vcc5v0_sys>;

		vcc8-supply = <&vcc3v3_sys>;

		vcc9-supply = <&vcc5v0_sys>;



		regulators {

			vdd_log: DCDC_REG1 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <750000>;

				regulator-max-microvolt = <1350000>;

				regulator-initial-mode = <0x2>;

				regulator-name = "vdd_log";

				regulator-state-mem {

					regulator-off-in-suspend;

					regulator-suspend-microvolt = <900000>;

				};

			};



			vdd_cpu_l: DCDC_REG2 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <750000>;

				regulator-max-microvolt = <1350000>;

				regulator-ramp-delay = <6001>;

				regulator-initial-mode = <0x2>;

				regulator-name = "vdd_cpu_l";

				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vcc_ddr: DCDC_REG3 {

				regulator-always-on;

				regulator-boot-on;

				regulator-name = "vcc_ddr";

				regulator-initial-mode = <0x2>;

				regulator-state-mem {

					regulator-on-in-suspend;

				};

			};



			vcc3v3_sys: DCDC_REG4 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-initial-mode = <0x2>;

				regulator-name = "vcc3v3_sys";

				regulator-state-mem {

					regulator-on-in-suspend;

					regulator-suspend-microvolt = <3300000>;

				};

			};



			vcc_buck5: DCDC_REG5 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-name = "vcc_buck5";

				regulator-state-mem {

					regulator-on-in-suspend;

					regulator-suspend-microvolt = <3300000>;

				};

			};



			vcca_0v9: LDO_REG1 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <900000>;

				regulator-max-microvolt = <900000>;

				regulator-name = "vcca_0v9";

				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vcc_1v8: LDO_REG2 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-name = "vcc_1v8";

				regulator-state-mem {

					regulator-on-in-suspend;

					regulator-suspend-microvolt = <1800000>;

				};

			};



			vcc0v9_soc: LDO_REG3 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <900000>;

				regulator-max-microvolt = <900000>;

				regulator-name = "vcc0v9_soc";

				regulator-state-mem {

					regulator-on-in-suspend;

					regulator-suspend-microvolt = <900000>;

				};

			};



			vcca_1v8: LDO_REG4 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-name = "vcca_1v8";

				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vcc_mipi: LDO_REG5 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <3000000>;

				regulator-max-microvolt = <3000000>;

				regulator-name = "vcc_mipi";

				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vcc_1v5: LDO_REG6 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <1500000>;

				regulator-max-microvolt = <1500000>;

				regulator-name = "vcc_1v5";

				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vcc_3v0: LDO_REG7 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <3000000>;

				regulator-max-microvolt = <3000000>;

				regulator-name = "vcc_3v0";

				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vccio_sd: LDO_REG8 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <3300000>;

				regulator-name = "vccio_sd";

				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vcc_cam: LDO_REG9 {

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-name = "vcc_cam";

				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vcc5v0_host0_s0: SWITCH_REG1 {

				regulator-always-on;

				regulator-boot-on;

				regulator-name = "vcc5v0_host0_s0";

				regulator-state-mem {

					regulator-on-in-suspend;

				};

			};



			lcd_3v3: SWITCH_REG2 {

				regulator-always-on;

				regulator-boot-on;

				regulator-name = "lcd_3v3";

				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};

		};

	};



	vdd_cpu_b: regulator@40 {

		compatible = "silergy,syr827";

		reg = <0x40>;

		fcs,suspend-voltage-selector = <1>;

		regulator-compatible = "fan53555-reg";

		pinctrl-0 = <&vsel1_gpio>;

		vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;

		regulator-name = "vdd_cpu_b";

		regulator-min-microvolt = <712500>;

		regulator-max-microvolt = <1500000>;

		regulator-ramp-delay = <1000>;

		regulator-always-on;

		regulator-boot-on;

		vin-supply = <&vcc5v0_sys>;

		regulator-state-mem {

			regulator-off-in-suspend;

		};

	};



	vdd_gpu: regulator@41 {

		compatible = "silergy,syr828";

		reg = <0x41>;

		fcs,suspend-voltage-selector = <1>;

		regulator-compatible = "fan53555-reg";

		pinctrl-0 = <&vsel2_gpio>;

		vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;

		regulator-name = "vdd_gpu";

		regulator-min-microvolt = <712500>;

		regulator-max-microvolt = <1500000>;

		regulator-ramp-delay = <1000>;

		regulator-always-on;

		regulator-boot-on;

		vin-supply = <&vcc5v0_sys>;

		regulator-initial-mode = <1>; /* 1:force PWM 2:auto */

		regulator-state-mem {

			regulator-off-in-suspend;

		};

	};

};



&i2c3 {

	i2c-scl-rising-time-ns = <450>;

	i2c-scl-falling-time-ns = <15>;

	status = "okay";

};



&i2s2 {

	status = "okay";

};



&io_domains {

	bt656-supply = <&vcc_3v0>;

	gpio1830-supply = <&vcc_3v0>;

	sdmmc-supply = <&vccio_sd>;

	status = "okay";

};



&pinctrl {

	bt {

		bt_enable_h: bt-enable-h {

			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;

		};



		bt_host_wake_l: bt-host-wake-l {

			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;

		};



		bt_wake_l: bt-wake-l {

			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;

		};

	};



	pmic {

		pmic_int_l: pmic-int-l {

			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;

		};



		vsel1_gpio: vsel1-gpio {

			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;

		};



		vsel2_gpio: vsel2-gpio {

			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;

		};

	};



	sdmmc {

		sdmmc_bus4: sdmmc-bus4 {

			rockchip,pins = <4 8 1 &pcfg_pull_up_8ma>,

					<4 9 1 &pcfg_pull_up_8ma>,

					<4 10 1 &pcfg_pull_up_8ma>,

					<4 11 1 &pcfg_pull_up_8ma>;

		};



		sdmmc_clk: sdmmc-clk {

			rockchip,pins = <4 12 1 &pcfg_pull_none_18ma>;

		};



		sdmmc_cmd: sdmmc-cmd {

			rockchip,pins = <4 13 1 &pcfg_pull_up_8ma>;

		};

	};



	usb-typec {

		vcc5v0_typec0_en: vcc5v0-typec-en {

			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;

		};

	};



	usb2 {

		vcc5v0_host_en: vcc5v0-host-en {

			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;

		};

	};



	wifi {

		wifi_enable_h: wifi-enable-h {

			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;

		};



		wifi_host_wake_l: wifi-host-wake-l {

			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;

		};

	};

};



&pmu_io_domains {

	pmu1830-supply = <&vcc_3v0>;

	status = "okay";

};



&saradc {

	status = "okay";

	vref-supply = <&vcc_1v8>;

};



&sdhci {

	max-frequency = <150000000>;

	bus-width = <8>;

	mmc-hs400-1_8v;

	non-removable;

	mmc-hs400-enhanced-strobe;

	status = "okay";

};



&sdio0 {

	#address-cells = <1>;

	#size-cells = <0>;

	bus-width = <4>;

	clock-frequency = <50000000>;

	cap-sdio-irq;

	cap-sd-highspeed;

	keep-power-in-suspend;

	mmc-pwrseq = <&sdio_pwrseq>;

	non-removable;

	pinctrl-names = "default";

	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;

	sd-uhs-sdr104;

	status = "okay";



	brcmf: wifi@1 {

		compatible = "brcm,bcm4329-fmac";

		reg = <1>;

		interrupt-parent = <&gpio0>;

		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;

		interrupt-names = "host-wake";

		pinctrl-names = "default";

		pinctrl-0 = <&wifi_host_wake_l>;

	};

};



&sdmmc {

	bus-width = <4>;

	cap-mmc-highspeed;

	cap-sd-highspeed;

	card-detect-delay = <800>;

	disable-wp;

	pinctrl-names = "default";

	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;

	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;

	vqmmc-supply = <&vccio_sd>;

	status = "okay";

};



&tcphy0 {

	status = "okay";

};



&tcphy1 {

	status = "okay";

};



&u2phy0 {

	status = "okay";



	u2phy0_otg: otg-port {

		status = "okay";

	};



	u2phy0_host: host-port {

		phy-supply = <&vcc5v0_host1>;

		status = "okay";

	};

};



&u2phy1 {

	status = "okay";



	u2phy1_otg: otg-port {

		status = "okay";

	};



	u2phy1_host: host-port {

		phy-supply = <&vcc5v0_host1>;

		status = "okay";

	};

};



&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;

	status = "okay";



	bluetooth {

		compatible = "brcm,bcm4345c5";

		clocks = <&rk809 1>;

		clock-names = "lpo";

		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;

		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;

		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;

		max-speed = <1500000>;

		pinctrl-names = "default";

		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;

		vbat-supply = <&vcc3v3_sys>;

		vddio-supply = <&vcc_1v8>;

	};

};



&uart2 {

	status = "okay";

};



&usb_host0_ehci {

	status = "okay";

};



&usb_host0_ohci {

	status = "okay";

};



&usb_host1_ehci {

	status = "okay";

};



&usb_host1_ohci {

	status = "okay";

};



&usbdrd3_0 {

	extcon = <&u2phy0>;

	status = "okay";

};



&usbdrd_dwc3_0 {

	status = "okay";

	dr_mode = "host";

};



&usbdrd3_1 {

	status = "okay";

};



&usbdrd_dwc3_1 {

	status = "okay";

	dr_mode = "host";

};



&vopb {

	status = "okay";

};



&vopb_mmu {

	status = "okay";

};



&vopl {

	status = "okay";

};



&vopl_mmu {

	status = "okay";

};