Commit 2338c76a authored by Kishon Vijay Abraham I's avatar Kishon Vijay Abraham I Committed by Tony Lindgren
Browse files

ARM: dts: am4372/dra7/omap5: Use "syscon-phy-power" instead of "ctrl-module" 



Add "syscon-phy-power" property and remove the deprecated "ctrl-module"
property from SATA and USB PHY node. Also remove the unused control
module dt nodes.

Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 4b4f52ed

arch/arm/boot/dts/am4372.dtsi

+2 −14
Original line number Diff line number Diff line
@@ -896,18 +896,6 @@ 
			status = "disabled";

		};



		am43xx_control_usb2phy1: control-phy@44e10620 {

			compatible = "ti,control-phy-usb2-am437";

			reg = <0x44e10620 0x4>;

			reg-names = "power";

		};



		am43xx_control_usb2phy2: control-phy@0x44e10628 {

			compatible = "ti,control-phy-usb2-am437";

			reg = <0x44e10628 0x4>;

			reg-names = "power";

		};



		ocp2scp0: ocp2scp@483a8000 {

			compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";

			#address-cells = <1>;
@@ -918,7 +906,7 @@ 
			usb2_phy1: phy@483a8000 {

				compatible = "ti,am437x-usb2";

				reg = <0x483a8000 0x8000>;

				ctrl-module = <&am43xx_control_usb2phy1>;

				syscon-phy-power = <&scm_conf 0x620>;

				clocks = <&usb_phy0_always_on_clk32k>,

					 <&usb_otg_ss0_refclk960m>;

				clock-names = "wkupclk", "refclk";
@@ -937,7 +925,7 @@ 
			usb2_phy2: phy@483e8000 {

				compatible = "ti,am437x-usb2";

				reg = <0x483e8000 0x8000>;

				ctrl-module = <&am43xx_control_usb2phy2>;

				syscon-phy-power = <&scm_conf 0x628>;

				clocks = <&usb_phy1_always_on_clk32k>,

					 <&usb_otg_ss1_refclk960m>;

				clock-names = "wkupclk", "refclk";

arch/arm/boot/dts/dra7.dtsi

+4 −30
Original line number Diff line number Diff line
@@ -1173,14 +1173,6 @@ 
			status = "disabled";

		};



		omap_control_sata: control-phy@4a002374 {

			compatible = "ti,control-phy-pipe3";

			reg = <0x4a002374 0x4>;

			reg-names = "power";

			clocks = <&sys_clkin1>;

			clock-names = "sysclk";

		};



		/* OCP2SCP3 */

		ocp2scp@4a090000 {

			compatible = "ti,omap-ocp2scp";
@@ -1195,7 +1187,7 @@ 
				      <0x4A096400 0x64>, /* phy_tx */

				      <0x4A096800 0x40>; /* pll_ctrl */

				reg-names = "phy_rx", "phy_tx", "pll_ctrl";

				ctrl-module = <&omap_control_sata>;

				syscon-phy-power = <&scm_conf 0x374>;

				clocks = <&sys_clkin1>, <&sata_ref_clk>;

				clock-names = "sysclk", "refclk";

				syscon-pllreset = <&scm_conf 0x3fc>;
@@ -1263,24 +1255,6 @@ 
			clocks = <&sys_32k_ck>;

		};



		omap_control_usb2phy1: control-phy@4a002300 {

			compatible = "ti,control-phy-usb2";

			reg = <0x4a002300 0x4>;

			reg-names = "power";

		};



		omap_control_usb3phy1: control-phy@4a002370 {

			compatible = "ti,control-phy-pipe3";

			reg = <0x4a002370 0x4>;

			reg-names = "power";

		};



		omap_control_usb2phy2: control-phy@0x4a002e74 {

			compatible = "ti,control-phy-usb2-dra7";

			reg = <0x4a002e74 0x4>;

			reg-names = "power";

		};



		/* OCP2SCP1 */

		ocp2scp@4a080000 {

			compatible = "ti,omap-ocp2scp";
@@ -1293,7 +1267,7 @@ 
			usb2_phy1: phy@4a084000 {

				compatible = "ti,omap-usb2";

				reg = <0x4a084000 0x400>;

				ctrl-module = <&omap_control_usb2phy1>;

				syscon-phy-power = <&scm_conf 0x300>;

				clocks = <&usb_phy1_always_on_clk32k>,

					 <&usb_otg_ss1_refclk960m>;

				clock-names =	"wkupclk",
@@ -1305,7 +1279,7 @@ 
				compatible = "ti,dra7x-usb2-phy2",

					     "ti,omap-usb2";

				reg = <0x4a085000 0x400>;

				ctrl-module = <&omap_control_usb2phy2>;

				syscon-phy-power = <&scm_conf 0xe74>;

				clocks = <&usb_phy2_always_on_clk32k>,

					 <&usb_otg_ss2_refclk960m>;

				clock-names =	"wkupclk",
@@ -1319,7 +1293,7 @@ 
				      <0x4a084800 0x64>,

				      <0x4a084c00 0x40>;

				reg-names = "phy_rx", "phy_tx", "pll_ctrl";

				ctrl-module = <&omap_control_usb3phy1>;

				syscon-phy-power = <&scm_conf 0x370>;

				clocks = <&usb_phy3_always_on_clk32k>,

					 <&sys_clkin1>,

					 <&usb_otg_ss1_refclk960m>;

arch/arm/boot/dts/omap5.dtsi

+3 −23
Original line number Diff line number Diff line
@@ -852,18 +852,6 @@ 
			hw-caps-temp-alert;

		};



		omap_control_usb2phy: control-phy@4a002300 {

			compatible = "ti,control-phy-usb2";

			reg = <0x4a002300 0x4>;

			reg-names = "power";

		};



		omap_control_usb3phy: control-phy@4a002370 {

			compatible = "ti,control-phy-pipe3";

			reg = <0x4a002370 0x4>;

			reg-names = "power";

		};



		usb3: omap_dwc3@4a020000 {

			compatible = "ti,dwc3";

			ti,hwmods = "usb_otg_ss";
@@ -899,7 +887,7 @@ 
			usb2_phy: usb2phy@4a084000 {

				compatible = "ti,omap-usb2";

				reg = <0x4a084000 0x7c>;

				ctrl-module = <&omap_control_usb2phy>;

				syscon-phy-power = <&scm_conf 0x300>;

				clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;

				clock-names = "wkupclk", "refclk";

				#phy-cells = <0>;
@@ -911,7 +899,7 @@ 
				      <0x4a084800 0x64>,

				      <0x4a084c00 0x40>;

				reg-names = "phy_rx", "phy_tx", "pll_ctrl";

				ctrl-module = <&omap_control_usb3phy>;

				syscon-phy-power = <&scm_conf 0x370>;

				clocks = <&usb_phy_cm_clk32k>,

					 <&sys_clkin>,

					 <&usb_otg_ss_refclk960m>;
@@ -967,14 +955,6 @@ 
			#thermal-sensor-cells = <1>;

		};



		omap_control_sata: control-phy@4a002374 {

			compatible = "ti,control-phy-pipe3";

			reg = <0x4a002374 0x4>;

			reg-names = "power";

			clocks = <&sys_clkin>;

			clock-names = "sysclk";

		};



		/* OCP2SCP3 */

		ocp2scp@4a090000 {

			compatible = "ti,omap-ocp2scp";
@@ -989,7 +969,7 @@ 
				      <0x4A096400 0x64>, /* phy_tx */

				      <0x4A096800 0x40>; /* pll_ctrl */

				reg-names = "phy_rx", "phy_tx", "pll_ctrl";

				ctrl-module = <&omap_control_sata>;

				syscon-phy-power = <&scm_conf 0x374>;

				clocks = <&sys_clkin>, <&sata_ref_clk>;

				clock-names = "sysclk", "refclk";

				#phy-cells = <0>;