Commit 21ce14a8 authored by Horatiu Vultur's avatar Horatiu Vultur Committed by David S. Miller
Browse files

net: lan966x: Add offload support for cbs



Lan966x switch supports credit based shaper in hardware according to
IEEE Std 802.1Q-2018 Section 8.6.8.2. Add support for cbs configuration
on egress port of lan966x switch.

Signed-off-by: default avatarHoratiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 94644b6d
Loading
Loading
Loading
Loading
+1 −1
Original line number Diff line number Diff line
@@ -10,4 +10,4 @@ lan966x-switch-objs := lan966x_main.o lan966x_phylink.o lan966x_port.o \
			lan966x_vlan.o lan966x_fdb.o lan966x_mdb.o \
			lan966x_ptp.o lan966x_fdma.o lan966x_lag.o \
			lan966x_tc.o lan966x_mqprio.o lan966x_taprio.o \
			lan966x_tbf.o
			lan966x_tbf.o lan966x_cbs.o
+70 −0
Original line number Diff line number Diff line
// SPDX-License-Identifier: GPL-2.0+

#include "lan966x_main.h"

int lan966x_cbs_add(struct lan966x_port *port,
		    struct tc_cbs_qopt_offload *qopt)
{
	struct lan966x *lan966x = port->lan966x;
	u32 cir, cbs;
	u8 se_idx;

	/* Check for invalid values */
	if (qopt->idleslope <= 0 ||
	    qopt->sendslope >= 0 ||
	    qopt->locredit >= qopt->hicredit)
		return -EINVAL;

	se_idx = SE_IDX_QUEUE + port->chip_port * NUM_PRIO_QUEUES + qopt->queue;
	cir = qopt->idleslope;
	cbs = (qopt->idleslope - qopt->sendslope) *
		(qopt->hicredit - qopt->locredit) /
		-qopt->sendslope;

	/* Rate unit is 100 kbps */
	cir = DIV_ROUND_UP(cir, 100);
	/* Avoid using zero rate */
	cir = cir ?: 1;
	/* Burst unit is 4kB */
	cbs = DIV_ROUND_UP(cbs, 4096);
	/* Avoid using zero burst */
	cbs = cbs ?: 1;

	/* Check that actually the result can be written */
	if (cir > GENMASK(15, 0) ||
	    cbs > GENMASK(6, 0))
		return -EINVAL;

	lan_rmw(QSYS_SE_CFG_SE_AVB_ENA_SET(1) |
		QSYS_SE_CFG_SE_FRM_MODE_SET(1),
		QSYS_SE_CFG_SE_AVB_ENA |
		QSYS_SE_CFG_SE_FRM_MODE,
		lan966x, QSYS_SE_CFG(se_idx));

	lan_wr(QSYS_CIR_CFG_CIR_RATE_SET(cir) |
	       QSYS_CIR_CFG_CIR_BURST_SET(cbs),
	       lan966x, QSYS_CIR_CFG(se_idx));

	return 0;
}

int lan966x_cbs_del(struct lan966x_port *port,
		    struct tc_cbs_qopt_offload *qopt)
{
	struct lan966x *lan966x = port->lan966x;
	u8 se_idx;

	se_idx = SE_IDX_QUEUE + port->chip_port * NUM_PRIO_QUEUES + qopt->queue;

	lan_rmw(QSYS_SE_CFG_SE_AVB_ENA_SET(1) |
		QSYS_SE_CFG_SE_FRM_MODE_SET(0),
		QSYS_SE_CFG_SE_AVB_ENA |
		QSYS_SE_CFG_SE_FRM_MODE,
		lan966x, QSYS_SE_CFG(se_idx));

	lan_wr(QSYS_CIR_CFG_CIR_RATE_SET(0) |
	       QSYS_CIR_CFG_CIR_BURST_SET(0),
	       lan966x, QSYS_CIR_CFG(se_idx));

	return 0;
}
+5 −0
Original line number Diff line number Diff line
@@ -471,6 +471,11 @@ int lan966x_tbf_add(struct lan966x_port *port,
int lan966x_tbf_del(struct lan966x_port *port,
		    struct tc_tbf_qopt_offload *qopt);

int lan966x_cbs_add(struct lan966x_port *port,
		    struct tc_cbs_qopt_offload *qopt);
int lan966x_cbs_del(struct lan966x_port *port,
		    struct tc_cbs_qopt_offload *qopt);

static inline void __iomem *lan_addr(void __iomem *base[],
				     int id, int tinst, int tcnt,
				     int gbase, int ginst,
+9 −0
Original line number Diff line number Diff line
@@ -37,6 +37,13 @@ static int lan966x_tc_setup_qdisc_tbf(struct lan966x_port *port,
	return -EOPNOTSUPP;
}

static int lan966x_tc_setup_qdisc_cbs(struct lan966x_port *port,
				      struct tc_cbs_qopt_offload *qopt)
{
	return qopt->enable ? lan966x_cbs_add(port, qopt) :
			      lan966x_cbs_del(port, qopt);
}

int lan966x_tc_setup(struct net_device *dev, enum tc_setup_type type,
		     void *type_data)
{
@@ -49,6 +56,8 @@ int lan966x_tc_setup(struct net_device *dev, enum tc_setup_type type,
		return lan966x_tc_setup_qdisc_taprio(port, type_data);
	case TC_SETUP_QDISC_TBF:
		return lan966x_tc_setup_qdisc_tbf(port, type_data);
	case TC_SETUP_QDISC_CBS:
		return lan966x_tc_setup_qdisc_cbs(port, type_data);
	default:
		return -EOPNOTSUPP;
	}