Commit 1d59524b authored by Konrad Dybcio's avatar Konrad Dybcio Committed by Bjorn Andersson
Browse files

ARM: dts: qcom-msm8974-klte: Use &labels 



Use &labels to align with the style used in new DTS and apply tiny
style fixes.

Signed-off-by: default avatarKonrad Dybcio <konrad.dybcio@somainline.org>
[bjorn: Rebased on top of Krzysztof's fixes]
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-12-konrad.dybcio@somainline.org
parent 1c1574e2

arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts

+583 −619
Original line number Diff line number Diff line
@@ -13,7 +13,7 @@ 
	aliases {

		serial0 = &blsp1_uart1;

		mmc0 = &sdhc_1; /* SDC1 eMMC slot */

		mmc1 = &sdhc_2; /* SDC2 SD card slot */

		mmc1 = &sdhc_3; /* SDC2 SD card slot */

	};



	chosen {
@@ -52,197 +52,6 @@ 
		};

	};



	smd {

		rpm {

			rpm-requests {

				pma8084-regulators {

					compatible = "qcom,rpm-pma8084-regulators";

					status = "okay";



					pma8084_s1: s1 {

						regulator-min-microvolt = <675000>;

						regulator-max-microvolt = <1050000>;

						regulator-always-on;

					};



					pma8084_s2: s2 {

						regulator-min-microvolt = <500000>;

						regulator-max-microvolt = <1050000>;

					};



					pma8084_s3: s3 {

						regulator-min-microvolt = <1300000>;

						regulator-max-microvolt = <1300000>;

					};



					pma8084_s4: s4 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <1800000>;

					};



					pma8084_s5: s5 {

						regulator-min-microvolt = <2150000>;

						regulator-max-microvolt = <2150000>;

					};



					pma8084_s6: s6 {

						regulator-min-microvolt = <1050000>;

						regulator-max-microvolt = <1050000>;

					};



					pma8084_l1: l1 {

						regulator-min-microvolt = <1225000>;

						regulator-max-microvolt = <1225000>;

					};



					pma8084_l2: l2 {

						regulator-min-microvolt = <1200000>;

						regulator-max-microvolt = <1200000>;

					};



					pma8084_l3: l3 {

						regulator-min-microvolt = <1050000>;

						regulator-max-microvolt = <1200000>;

					};



					pma8084_l4: l4 {

						regulator-min-microvolt = <1200000>;

						regulator-max-microvolt = <1225000>;

					};



					pma8084_l5: l5 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <1800000>;

					};



					pma8084_l6: l6 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <1800000>;

					};



					pma8084_l7: l7 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <1800000>;

					};



					pma8084_l8: l8 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <1800000>;

					};



					pma8084_l9: l9 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <2950000>;

					};



					pma8084_l10: l10 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <2950000>;

					};



					pma8084_l11: l11 {

						regulator-min-microvolt = <1300000>;

						regulator-max-microvolt = <1300000>;

					};



					pma8084_l12: l12 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <1800000>;

						regulator-always-on;

					};



					pma8084_l13: l13 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <2950000>;

					};



					pma8084_l14: l14 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <1800000>;

					};



					pma8084_l15: l15 {

						regulator-min-microvolt = <2050000>;

						regulator-max-microvolt = <2050000>;

					};



					pma8084_l16: l16 {

						regulator-min-microvolt = <2700000>;

						regulator-max-microvolt = <2700000>;

					};



					pma8084_l17: l17 {

						regulator-min-microvolt = <2850000>;

						regulator-max-microvolt = <2850000>;

					};



					pma8084_l18: l18 {

						regulator-min-microvolt = <2850000>;

						regulator-max-microvolt = <2850000>;

					};



					pma8084_l19: l19 {

						regulator-min-microvolt = <3300000>;

						regulator-max-microvolt = <3300000>;

					};



					pma8084_l20: l20 {

						regulator-min-microvolt = <2950000>;

						regulator-max-microvolt = <2950000>;



						regulator-allow-set-load;

						regulator-system-load = <200000>;

					};



					pma8084_l21: l21 {

						regulator-min-microvolt = <2950000>;

						regulator-max-microvolt = <2950000>;



						regulator-allow-set-load;

						regulator-system-load = <200000>;

					};



					pma8084_l22: l22 {

						regulator-min-microvolt = <3000000>;

						regulator-max-microvolt = <3300000>;

					};



					pma8084_l23: l23 {

						regulator-min-microvolt = <3000000>;

						regulator-max-microvolt = <3000000>;

					};



					pma8084_l24: l24 {

						regulator-min-microvolt = <3075000>;

						regulator-max-microvolt = <3075000>;

					};



					pma8084_l25: l25 {

						regulator-min-microvolt = <2100000>;

						regulator-max-microvolt = <2100000>;

					};



					pma8084_l26: l26 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <2050000>;

					};



					pma8084_l27: l27 {

						regulator-min-microvolt = <1000000>;

						regulator-max-microvolt = <1225000>;

					};



					pma8084_lvs1: lvs1 {};

					pma8084_lvs2: lvs2 {};

					pma8084_lvs3: lvs3 {};

					pma8084_lvs4: lvs4 {};



					pma8084_5vs1: 5vs1 {};

				};

			};

		};

	};



	i2c-gpio-touchkey {

		compatible = "i2c-gpio";

		#address-cells = <1>;
@@ -347,317 +156,45 @@ 
	};



	/delete-node/ vreg-boost;



	adsp-pil {

		cx-supply = <&pma8084_s2>;

	};

};



&soc {

	serial@f991e000 {

&blsp1_i2c2 {

	status = "okay";

	};



	/* blsp2_uart2 */

	serial@f995e000 {

		status = "okay";

	pinctrl-names = "default";

	pinctrl-0 = <&i2c2_pins>;



		pinctrl-names = "default", "sleep";

		pinctrl-0 = <&blsp2_uart2_pins_active>;

		pinctrl-1 = <&blsp2_uart2_pins_sleep>;

	touchscreen@20 {

		compatible = "syna,rmi4-i2c";

		reg = <0x20>;



		interrupt-parent = <&pma8084_gpios>;

		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;



		vdd-supply = <&max77826_ldo13>;

		vio-supply = <&pma8084_lvs2>;



		bluetooth {

			compatible = "brcm,bcm43540-bt";

			max-speed = <3000000>;

		pinctrl-names = "default";

			pinctrl-0 = <&bt_pins>;

			device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;

			shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;

			interrupt-parent = <&tlmm>;

			interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;

			interrupt-names = "host-wakeup";

		};

	};

		pinctrl-0 = <&touch_pin>;



	pinctrl@fd510000 {

		blsp2_uart2_pins_active: blsp2-uart2-pins-active {

			pins = "gpio45", "gpio46", "gpio47", "gpio48";

			function = "blsp_uart8";

			drive-strength = <8>;

			bias-disable;

		};

		syna,startup-delay-ms = <100>;



		blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep {

			pins = "gpio45", "gpio46", "gpio47", "gpio48";

			function = "gpio";

			drive-strength = <2>;

			bias-pull-down;

		};

		#address-cells = <1>;

		#size-cells = <0>;



		bt_pins: bt-pins {

			hostwake {

				pins = "gpio75";

				function = "gpio";

				drive-strength = <16>;

				input-enable;

		rmi4-f01@1 {

			reg = <0x1>;

			syna,nosleep-mode = <1>;

		};



			devwake {

				pins = "gpio91";

				function = "gpio";

				drive-strength = <2>;

		rmi4-f12@12 {

			reg = <0x12>;

			syna,sensor-type = <1>;

		};

	};



		sdhc1_pin_a: sdhc1-pin-active {

			clk {

				pins = "sdc1_clk";

				drive-strength = <4>;

				bias-disable;

};



			cmd-data {

				pins = "sdc1_cmd", "sdc1_data";

				drive-strength = <4>;

				bias-pull-up;

			};

		};



		sdhc2_pin_a: sdhc2-pin-active {

			clk-cmd-data {

				pins = "gpio35", "gpio36", "gpio37", "gpio38",

					"gpio39", "gpio40";

				function = "sdc3";

				drive-strength = <8>;

				bias-disable;

			};

		};



		sdhc2_cd_pin: sdhc2-cd {

			pins = "gpio62";

			function = "gpio";



			drive-strength = <2>;

			bias-disable;

		};



		sdhc3_pin_a: sdhc3-pin-active {

			clk {

				pins = "sdc2_clk";

				drive-strength = <6>;

				bias-disable;

			};



			cmd-data {

				pins = "sdc2_cmd", "sdc2_data";

				drive-strength = <6>;

				bias-pull-up;

			};

		};



		i2c2_pins: i2c2 {

			mux {

				pins = "gpio6", "gpio7";

				function = "blsp_i2c2";



				drive-strength = <2>;

				bias-disable;

			};

		};



		i2c6_pins: i2c6 {

			mux {

				pins = "gpio29", "gpio30";

				function = "blsp_i2c6";



				drive-strength = <2>;

				bias-disable;

			};

		};



		i2c12_pins: i2c12 {

			mux {

				pins = "gpio87", "gpio88";

				function = "blsp_i2c12";



				drive-strength = <2>;

				bias-disable;

			};

		};



		i2c_touchkey_pins: i2c-touchkey {

			mux {

				pins = "gpio95", "gpio96";

				function = "gpio";

				input-enable;

				bias-pull-up;

			};

		};



		i2c_led_gpioex_pins: i2c-led-gpioex {

			mux {

				pins = "gpio120", "gpio121";

				function = "gpio";

				input-enable;

				bias-pull-down;

			};

		};



		gpioex_pin: gpioex {

			res {

				pins = "gpio145";

				function = "gpio";



				bias-pull-up;

				drive-strength = <2>;

			};

		};



		wifi_pin: wifi {

			int {

				pins = "gpio92";

				function = "gpio";



				input-enable;

				bias-pull-down;

			};

		};



		panel_te_pin: panel {

			te {

				pins = "gpio12";

				function = "mdp_vsync";



				drive-strength = <2>;

				bias-disable;

			};

		};

	};



	sdhci@f9824900 {

		status = "okay";



		vmmc-supply = <&pma8084_l20>;

		vqmmc-supply = <&pma8084_s4>;



		bus-width = <8>;

		non-removable;



		pinctrl-names = "default";

		pinctrl-0 = <&sdhc1_pin_a>;

	};



	sdhci@f9864900 {

		status = "okay";



		max-frequency = <100000000>;



		vmmc-supply = <&pma8084_l21>;

		vqmmc-supply = <&pma8084_l13>;



		bus-width = <4>;



		/* cd-gpio is intentionally disabled. If enabled, an SD card

		 * present during boot is not initialized correctly. Without

		 * cd-gpios the driver resorts to polling, so hotplug works.

		 */

		pinctrl-names = "default";

		pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>;

		// cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;

	};



	sdhci@f98a4900 {

		status = "okay";



		#address-cells = <1>;

		#size-cells = <0>;



		max-frequency = <100000000>;



		pinctrl-names = "default";

		pinctrl-0 = <&sdhc3_pin_a>;



		vmmc-supply = <&vreg_wlan>;

		vqmmc-supply = <&pma8084_s4>;



		bus-width = <4>;

		non-removable;



		wifi@1 {

			reg = <1>;

			compatible = "brcm,bcm4329-fmac";



			interrupt-parent = <&tlmm>;

			interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;

			interrupt-names = "host-wake";



			pinctrl-names = "default";

			pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;

		};

	};



	usb@f9a55000 {

		status = "okay";



		phys = <&usb_hs1_phy>;

		phy-select = <&tcsr 0xb000 0>;

		/*extcon = <&smbb>, <&usb_id>;*/

		/*vbus-supply = <&chg_otg>;*/



		hnp-disable;

		srp-disable;

		adp-disable;



		ulpi {

			phy@a {

				status = "okay";



				v1p8-supply = <&pma8084_l6>;

				v3p3-supply = <&pma8084_l24>;



				/*extcon = <&smbb>;*/

				qcom,init-seq = /bits/ 8 <0x1 0x64>;

			};

		};

	};



	i2c@f9924000 {

		status = "okay";



		pinctrl-names = "default";

		pinctrl-0 = <&i2c2_pins>;



		touchscreen@20 {

			compatible = "syna,rmi4-i2c";

			reg = <0x20>;



			interrupt-parent = <&pma8084_gpios>;

			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;



			vdd-supply = <&max77826_ldo13>;

			vio-supply = <&pma8084_lvs2>;



			pinctrl-names = "default";

			pinctrl-0 = <&touch_pin>;



			syna,startup-delay-ms = <100>;



			#address-cells = <1>;

			#size-cells = <0>;



			rmi4-f01@1 {

				reg = <0x1>;

				syna,nosleep-mode = <1>;

			};



			rmi4-f12@12 {

				reg = <0x12>;

				syna,sensor-type = <1>;

			};

		};

	};



	i2c@f9928000 {

&blsp1_i2c6 {

	status = "okay";



	pinctrl-names = "default";
@@ -756,7 +293,11 @@ 
	};

};



	i2c@f9968000 {

&blsp1_uart2 {

	status = "okay";

};



&blsp2_i2c6 {

	status = "okay";



	pinctrl-names = "default";
@@ -777,39 +318,36 @@ 
	};

};



	adreno@fdb00000 {

		status = "ok";

	};

&blsp2_uart2 {

	status = "okay";



	mdss@fd900000 {

		status = "ok";

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&blsp2_uart2_pins_active>;

	pinctrl-1 = <&blsp2_uart2_pins_sleep>;



		mdp@fd900000 {

			status = "ok";

	bluetooth {

		compatible = "brcm,bcm43540-bt";

		max-speed = <3000000>;

		pinctrl-names = "default";

		pinctrl-0 = <&bt_pins>;

		device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;

		shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;

		interrupt-parent = <&tlmm>;

		interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;

		interrupt-names = "host-wakeup";

	};

};



		dsi@fd922800 {

			status = "ok";

&dsi0 {

	status = "okay";



	vdda-supply = <&pma8084_l2>;

	vdd-supply = <&pma8084_l22>;

	vddio-supply = <&pma8084_l12>;



			#address-cells = <1>;

			#size-cells = <0>;



			ports {

				port@1 {

					endpoint {

						remote-endpoint = <&panel_in>;

						data-lanes = <0 1 2 3>;

					};

				};

			};



			panel: panel@0 {

				reg = <0>;

				compatible = "samsung,s6e3fa2";

	panel: panel@0 {

		reg = <0>;

		compatible = "samsung,s6e3fa2";



		pinctrl-names = "default";

		pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
@@ -828,24 +366,48 @@ 
	};

};



		dsi-phy@fd922a00 {

			status = "ok";

&dsi0_out {

	remote-endpoint = <&panel_in>;

	data-lanes = <0 1 2 3>;

};



&dsi0_phy {

	status = "okay";



	vddio-supply = <&pma8084_l12>;

};



&gpu {

	status = "okay";

};



	remoteproc@fc880000 {

		cx-supply = <&pma8084_s2>;

		mss-supply = <&pma8084_s6>;

		mx-supply = <&pma8084_s1>;

		pll-supply = <&pma8084_l12>;

&mdss {

	status = "okay";

};



&otg {

	status = "okay";



	phys = <&usb_hs1_phy>;

	phy-select = <&tcsr 0xb000 0>;



	hnp-disable;

	srp-disable;

	adp-disable;



	ulpi {

		phy@a {

			status = "okay";



			v1p8-supply = <&pma8084_l6>;

			v3p3-supply = <&pma8084_l24>;



			qcom,init-seq = /bits/ 8 <0x1 0x64>;

		};

	};

};



&spmi_bus {

	pma8084@0 {

		gpios@c000 {

&pma8084_gpios {

	gpio_keys_pin_a: gpio-keys-active {

		pins = "gpio2", "gpio3", "gpio5";

		function = "normal";
@@ -895,7 +457,6 @@ 
		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;

	};





	fuelgauge_pin: fuelgauge-int-pin {

		pins = "gpio21";

		function = "normal";
@@ -904,5 +465,408 @@ 
		power-source = <PMA8084_GPIO_S4>;

	};

};



&remoteproc_adsp {

	cx-supply = <&pma8084_s2>;

};



&remoteproc_mss {

	cx-supply = <&pma8084_s2>;

	mss-supply = <&pma8084_s6>;

	mx-supply = <&pma8084_s1>;

	pll-supply = <&pma8084_l12>;

};



&rpm_requests {

	pma8084-regulators {

		compatible = "qcom,rpm-pma8084-regulators";



		pma8084_s1: s1 {

			regulator-min-microvolt = <675000>;

			regulator-max-microvolt = <1050000>;

			regulator-always-on;

		};



		pma8084_s2: s2 {

			regulator-min-microvolt = <500000>;

			regulator-max-microvolt = <1050000>;

		};



		pma8084_s3: s3 {

			regulator-min-microvolt = <1300000>;

			regulator-max-microvolt = <1300000>;

		};



		pma8084_s4: s4 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};



		pma8084_s5: s5 {

			regulator-min-microvolt = <2150000>;

			regulator-max-microvolt = <2150000>;

		};



		pma8084_s6: s6 {

			regulator-min-microvolt = <1050000>;

			regulator-max-microvolt = <1050000>;

		};



		pma8084_l1: l1 {

			regulator-min-microvolt = <1225000>;

			regulator-max-microvolt = <1225000>;

		};



		pma8084_l2: l2 {

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

		};



		pma8084_l3: l3 {

			regulator-min-microvolt = <1050000>;

			regulator-max-microvolt = <1200000>;

		};



		pma8084_l4: l4 {

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1225000>;

		};



		pma8084_l5: l5 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};



		pma8084_l6: l6 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};



		pma8084_l7: l7 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};



		pma8084_l8: l8 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};



		pma8084_l9: l9 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <2950000>;

		};



		pma8084_l10: l10 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <2950000>;

		};



		pma8084_l11: l11 {

			regulator-min-microvolt = <1300000>;

			regulator-max-microvolt = <1300000>;

		};



		pma8084_l12: l12 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-always-on;

		};



		pma8084_l13: l13 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <2950000>;

		};



		pma8084_l14: l14 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};



		pma8084_l15: l15 {

			regulator-min-microvolt = <2050000>;

			regulator-max-microvolt = <2050000>;

		};



		pma8084_l16: l16 {

			regulator-min-microvolt = <2700000>;

			regulator-max-microvolt = <2700000>;

		};



		pma8084_l17: l17 {

			regulator-min-microvolt = <2850000>;

			regulator-max-microvolt = <2850000>;

		};



		pma8084_l18: l18 {

			regulator-min-microvolt = <2850000>;

			regulator-max-microvolt = <2850000>;

		};



		pma8084_l19: l19 {

			regulator-min-microvolt = <3300000>;

			regulator-max-microvolt = <3300000>;

		};



		pma8084_l20: l20 {

			regulator-min-microvolt = <2950000>;

			regulator-max-microvolt = <2950000>;

			regulator-system-load = <200000>;

			regulator-allow-set-load;

		};



		pma8084_l21: l21 {

			regulator-min-microvolt = <2950000>;

			regulator-max-microvolt = <2950000>;

			regulator-system-load = <200000>;

			regulator-allow-set-load;

		};



		pma8084_l22: l22 {

			regulator-min-microvolt = <3000000>;

			regulator-max-microvolt = <3300000>;

		};



		pma8084_l23: l23 {

			regulator-min-microvolt = <3000000>;

			regulator-max-microvolt = <3000000>;

		};



		pma8084_l24: l24 {

			regulator-min-microvolt = <3075000>;

			regulator-max-microvolt = <3075000>;

		};



		pma8084_l25: l25 {

			regulator-min-microvolt = <2100000>;

			regulator-max-microvolt = <2100000>;

		};



		pma8084_l26: l26 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <2050000>;

		};



		pma8084_l27: l27 {

			regulator-min-microvolt = <1000000>;

			regulator-max-microvolt = <1225000>;

		};



		pma8084_lvs1: lvs1 {};

		pma8084_lvs2: lvs2 {};

		pma8084_lvs3: lvs3 {};

		pma8084_lvs4: lvs4 {};



		pma8084_5vs1: 5vs1 {};

	};

};



&sdhc_1 {

	status = "okay";



	vmmc-supply = <&pma8084_l20>;

	vqmmc-supply = <&pma8084_s4>;



	pinctrl-names = "default";

	pinctrl-0 = <&sdhc1_pin_a>;

};



&sdhc_2 {

	status = "okay";

	max-frequency = <100000000>;



	pinctrl-names = "default";

	pinctrl-0 = <&sdhc3_pin_a>;



	vmmc-supply = <&vreg_wlan>;

	vqmmc-supply = <&pma8084_s4>;



	non-removable;



	#address-cells = <1>;

	#size-cells = <0>;



	wifi@1 {

		reg = <1>;

		compatible = "brcm,bcm4329-fmac";



		interrupt-parent = <&tlmm>;

		interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;

		interrupt-names = "host-wake";



		pinctrl-names = "default";

		pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;

	};

};



&sdhc_3 {

	status = "okay";

	max-frequency = <100000000>;



	vmmc-supply = <&pma8084_l21>;

	vqmmc-supply = <&pma8084_l13>;



	/*

	 * cd-gpio is intentionally disabled. If enabled, an SD card

	 * present during boot is not initialized correctly. Without

	 * cd-gpios the driver resorts to polling, so hotplug works.

	 */

	pinctrl-names = "default";

	pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>;

	/* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */

};



&tlmm {

	blsp2_uart2_pins_active: blsp2-uart2-pins-active {

		pins = "gpio45", "gpio46", "gpio47", "gpio48";

		function = "blsp_uart8";

		drive-strength = <8>;

		bias-disable;

	};



	blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep {

		pins = "gpio45", "gpio46", "gpio47", "gpio48";

		function = "gpio";

		drive-strength = <2>;

		bias-pull-down;

	};



	bt_pins: bt-pins {

		hostwake {

			pins = "gpio75";

			function = "gpio";

			drive-strength = <16>;

			input-enable;

		};



		devwake {

			pins = "gpio91";

			function = "gpio";

			drive-strength = <2>;

		};

	};



	sdhc1_pin_a: sdhc1-pin-active {

		clk {

			pins = "sdc1_clk";

			drive-strength = <4>;

			bias-disable;

		};



		cmd-data {

			pins = "sdc1_cmd", "sdc1_data";

			drive-strength = <4>;

			bias-pull-up;

		};

	};



	sdhc2_pin_a: sdhc2-pin-active {

		clk-cmd-data {

			pins = "gpio35", "gpio36", "gpio37", "gpio38",

				"gpio39", "gpio40";

			function = "sdc3";

			drive-strength = <8>;

			bias-disable;

		};

	};



	sdhc2_cd_pin: sdhc2-cd {

		pins = "gpio62";

		function = "gpio";



		drive-strength = <2>;

		bias-disable;

	};



	sdhc3_pin_a: sdhc3-pin-active {

		clk {

			pins = "sdc2_clk";

			drive-strength = <6>;

			bias-disable;

		};



		cmd-data {

			pins = "sdc2_cmd", "sdc2_data";

			drive-strength = <6>;

			bias-pull-up;

		};

	};



	i2c2_pins: i2c2 {

		mux {

			pins = "gpio6", "gpio7";

			function = "blsp_i2c2";



			drive-strength = <2>;

			bias-disable;

		};

	};



	i2c6_pins: i2c6 {

		mux {

			pins = "gpio29", "gpio30";

			function = "blsp_i2c6";



			drive-strength = <2>;

			bias-disable;

		};

	};



	i2c12_pins: i2c12 {

		mux {

			pins = "gpio87", "gpio88";

			function = "blsp_i2c12";



			drive-strength = <2>;

			bias-disable;

		};

	};



	i2c_touchkey_pins: i2c-touchkey {

		mux {

			pins = "gpio95", "gpio96";

			function = "gpio";

			input-enable;

			bias-pull-up;

		};

	};



	i2c_led_gpioex_pins: i2c-led-gpioex {

		mux {

			pins = "gpio120", "gpio121";

			function = "gpio";

			input-enable;

			bias-pull-down;

		};

	};



	gpioex_pin: gpioex {

		res {

			pins = "gpio145";

			function = "gpio";



			bias-pull-up;

			drive-strength = <2>;

		};

	};



	wifi_pin: wifi {

		int {

			pins = "gpio92";

			function = "gpio";



			input-enable;

			bias-pull-down;

		};

	};



	panel_te_pin: panel {

		te {

			pins = "gpio12";

			function = "mdp_vsync";



			drive-strength = <2>;

			bias-disable;

		};

	};

};

arch/arm/boot/dts/qcom-msm8974.dtsi

+2 −2
Original line number Diff line number Diff line
@@ -339,7 +339,7 @@ 
		clock-frequency = <19200000>;

	};



	adsp-pil {

	remoteproc_adsp: adsp-pil {

		compatible = "qcom,msm8974-adsp-pil";



		interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
@@ -840,7 +840,7 @@ 
			clock-names = "core";

		};



		remoteproc@fc880000 {

		remoteproc_mss: remoteproc@fc880000 {

			compatible = "qcom,msm8974-mss-pil";

			reg = <0xfc880000 0x100>, <0xfc820000 0x020>;

			reg-names = "qdsp6", "rmb";