Commit 1c46ae05 authored by Michael Chan's avatar Michael Chan Committed by David S. Miller
Browse files

[TG3]: Eliminate the unused TG3_FLAG_SPLIT_MODE flag. 



This flag to support multiple PCIX split completions was never used
because of hardware bugs.  This will make room for a new flag.

Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f11e6659

drivers/net/tg3.c

+1 −16
Original line number Diff line number Diff line
@@ -6321,8 +6321,6 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) 
		      RDMAC_MODE_ADDROFLOW_ENAB | RDMAC_MODE_FIFOOFLOW_ENAB |

		      RDMAC_MODE_FIFOURUN_ENAB | RDMAC_MODE_FIFOOREAD_ENAB |

		      RDMAC_MODE_LNGREAD_ENAB);

	if (tp->tg3_flags & TG3_FLAG_SPLIT_MODE)

		rdmac_mode |= RDMAC_MODE_SPLIT_ENABLE;



	/* If statement applies to 5705 and 5750 PCI devices only */

	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
@@ -6495,9 +6493,6 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) 
		} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {

			val &= ~(PCIX_CAPS_SPLIT_MASK | PCIX_CAPS_BURST_MASK);

			val |= (PCIX_CAPS_MAX_BURST_CPIOB << PCIX_CAPS_BURST_SHIFT);

			if (tp->tg3_flags & TG3_FLAG_SPLIT_MODE)

				val |= (tp->split_mode_max_reqs <<

					PCIX_CAPS_SPLIT_SHIFT);

		}

		tw32(TG3PCI_X_CAPS, val);

	}
@@ -10863,14 +10858,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) 
	grc_misc_cfg = tr32(GRC_MISC_CFG);

	grc_misc_cfg &= GRC_MISC_CFG_BOARD_ID_MASK;



	/* Broadcom's driver says that CIOBE multisplit has a bug */

#if 0

	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 &&

	    grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5704CIOBE) {

		tp->tg3_flags |= TG3_FLAG_SPLIT_MODE;

		tp->split_mode_max_reqs = SPLIT_MODE_5704_MAX_REQ;

	}

#endif

	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&

	    (grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788 ||

	     grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788M))
@@ -11968,14 +11955,12 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, 
		       i == 5 ? '\n' : ':');



	printk(KERN_INFO "%s: RXcsums[%d] LinkChgREG[%d] "

	       "MIirq[%d] ASF[%d] Split[%d] WireSpeed[%d] "

	       "TSOcap[%d] \n",

	       "MIirq[%d] ASF[%d] WireSpeed[%d] TSOcap[%d]\n",

	       dev->name,

	       (tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0,

	       (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) != 0,

	       (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT) != 0,

	       (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0,

	       (tp->tg3_flags & TG3_FLAG_SPLIT_MODE) != 0,

	       (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0,

	       (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);

	printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n",

drivers/net/tg3.h

+0 −4
Original line number Diff line number Diff line
@@ -2223,7 +2223,6 @@ struct tg3 { 
#define TG3_FLAG_40BIT_DMA_BUG		0x08000000

#define TG3_FLAG_BROKEN_CHECKSUMS	0x10000000

#define TG3_FLAG_GOT_SERDES_FLOWCTL	0x20000000

#define TG3_FLAG_SPLIT_MODE		0x40000000

#define TG3_FLAG_INIT_COMPLETE		0x80000000

	u32				tg3_flags2;

#define TG3_FLG2_RESTART_TIMER		0x00000001
@@ -2262,9 +2261,6 @@ struct tg3 { 
#define TG3_FLG2_NO_FWARE_REPORTED	0x40000000

#define TG3_FLG2_PHY_ADJUST_TRIM	0x80000000



	u32				split_mode_max_reqs;

#define SPLIT_MODE_5704_MAX_REQ		3



	struct timer_list		timer;

	u16				timer_counter;

	u16				timer_multiplier;