Commit 1b5a78e6 authored by Oleksij Rempel's avatar Oleksij Rempel Committed by Marc Kleine-Budde
Browse files

dt-binding: can: mcp25xxfd: document device tree bindings 



This patch adds the device-tree binding documentation for the Microchip
MCP25xxFD SPI CAN controller family.

Signed-off-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20200918172536.2074504-2-mkl@pengutronix.de
parent 728fc9ff

Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml

0 → 100644
+79 −0
Original line number Diff line number Diff line 
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

%YAML 1.2

---

$id: http://devicetree.org/schemas/net/can/microchip,mcp25xxfd.yaml#

$schema: http://devicetree.org/meta-schemas/core.yaml#



title:

  Microchip MCP2517FD and MCP2518FD stand-alone CAN controller device tree

  bindings



maintainers:

  - Marc Kleine-Budde <mkl@pengutronix.de>



properties:

  compatible:

    oneOf:

      - const: microchip,mcp2517fd

        description: for MCP2517FD

      - const: microchip,mcp2518fd

        description: for MCP2518FD

      - const: microchip,mcp25xxfd

        description: to autodetect chip variant



  reg:

    maxItems: 1



  interrupts-extended:

    maxItems: 1



  clocks:

    maxItems: 1



  vdd-supply:

    description: Regulator that powers the CAN controller.

    maxItems: 1



  xceiver-supply:

    description: Regulator that powers the CAN transceiver.

    maxItems: 1



  microchip,rx-int-gpios:

    description:

      GPIO phandle of GPIO connected to to INT1 pin of the MCP25XXFD, which

      signals a pending RX interrupt.

    maxItems: 1



  spi-max-frequency:

    description:

      Must be half or less of "clocks" frequency.

    maximum: 20000000



required:

  - compatible

  - reg

  - interrupts-extended

  - clocks



examples:

  - |

    #include <dt-bindings/gpio/gpio.h>

    #include <dt-bindings/interrupt-controller/irq.h>



    spi0 {

        #address-cells = <1>;

        #size-cells = <0>;



        can@0 {

            compatible = "microchip,mcp25xxfd";

            reg = <0>;

            clocks = <&can0_osc>;

            pinctrl-names = "default";

            pinctrl-0 = <&can0_pins>;

            spi-max-frequency = <20000000>;

            interrupts-extended = <&gpio 13 IRQ_TYPE_LEVEL_LOW>;

            microchip,rx-int-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;

            vdd-supply = <&reg5v0>;

            xceiver-supply = <&reg5v0>;

        };

    };