Commit 1953feb0 authored by Wenpeng Liang's avatar Wenpeng Liang Committed by David S. Miller
Browse files

net: phy: correct format of block comments 



Block comments should not use a trailing */ on a separate line and every
line of a block comment should start with an '*'.

Signed-off-by: default avatarWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: default avatarWeihang Li <liweihang@huawei.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 775f2547

drivers/net/phy/national.c

+4 −2
Original line number Diff line number Diff line
@@ -68,7 +68,8 @@ static int ns_ack_interrupt(struct phy_device *phydev) 
		return ret;



	/* Clear the interrupt status bit by writing a “1”

	 * to the corresponding bit in INT_CLEAR (2:0 are reserved) */

	 * to the corresponding bit in INT_CLEAR (2:0 are reserved)

	 */

	ret = phy_write(phydev, DP83865_INT_CLEAR, ret & ~0x7);



	return ret;
@@ -150,7 +151,8 @@ static int ns_config_init(struct phy_device *phydev) 
{

	ns_giga_speed_fallback(phydev, ALL_FALLBACK_ON);

	/* In the latest MAC or switches design, the 10 Mbps loopback

	   is desired to be turned off. */

	 * is desired to be turned off.

	 */

	ns_10_base_t_hdx_loopack(phydev, hdx_loopback_off);

	return ns_ack_interrupt(phydev);

}

drivers/net/phy/phy-core.c

+2 −1
Original line number Diff line number Diff line
@@ -76,7 +76,8 @@ EXPORT_SYMBOL_GPL(phy_duplex_to_str); 


/* A mapping of all SUPPORTED settings to speed/duplex.  This table

 * must be grouped by speed and sorted in descending match priority

 * - iow, descending speed. */

 * - iow, descending speed.

 */



#define PHY_SETTING(s, d, b) { .speed = SPEED_ ## s, .duplex = DUPLEX_ ## d, \

			       .bit = ETHTOOL_LINK_MODE_ ## b ## _BIT}

drivers/net/phy/phylink.c

+6 −3
Original line number Diff line number Diff line
@@ -182,7 +182,8 @@ static int phylink_parse_fixedlink(struct phylink *pl, 
			pl->link_config.duplex = DUPLEX_FULL;



		/* We treat the "pause" and "asym-pause" terminology as

		 * defining the link partner's ability. */

		 * defining the link partner's ability.

		 */

		if (fwnode_property_read_bool(fixed_node, "pause"))

			__set_bit(ETHTOOL_LINK_MODE_Pause_BIT,

				  pl->link_config.lp_advertising);
@@ -685,7 +686,8 @@ static void phylink_resolve(struct work_struct *w) 
			phylink_mac_pcs_get_state(pl, &link_state);



			/* If we have a phy, the "up" state is the union of

			 * both the PHY and the MAC */

			 * both the PHY and the MAC

			 */

			if (pl->phydev)

				link_state.link &= pl->phy_state.link;
@@ -694,7 +696,8 @@ static void phylink_resolve(struct work_struct *w) 
				link_state.interface = pl->phy_state.interface;



				/* If we have a PHY, we need to update with

				 * the PHY flow control bits. */

				 * the PHY flow control bits.

				 */

				link_state.pause = pl->phy_state.pause;

				mac_config = true;

			}

drivers/net/phy/vitesse.c

+2 −1
Original line number Diff line number Diff line
@@ -249,7 +249,8 @@ static int vsc73xx_config_aneg(struct phy_device *phydev) 


/* This adds a skew for both TX and RX clocks, so the skew should only be

 * applied to "rgmii-id" interfaces. It may not work as expected

 * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces. */

 * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces.

 */

static int vsc8601_add_skew(struct phy_device *phydev)

{

	int ret;

drivers/net/phy/lxt.c

+2 −2

File changed.

Contains only whitespace changes.