dt-bindings:net:wireless:mediatek,mt76: txt to yaml conversion

* MediaTek mt76xx devices

This node provides properties for configuring the MediaTek mt76xx wireless

device. The node is expected to be specified as a child node of the PCI

controller to which the wireless chip is connected.

Alternatively, it can specify the wireless part of the MT7628/MT7688 or

MT7622 SoC. For SoC, use the following compatible strings:

compatible:

- "mediatek,mt7628-wmac" for MT7628/MT7688

- "mediatek,mt7622-wmac" for MT7622

properties:

- reg: Address and length of the register set for the device.

- interrupts: Main device interrupt

MT7622 specific properties:

- power-domains: phandle to the power domain that the WMAC is part of

- mediatek,infracfg: phandle to the infrastructure bus fabric syscon node

Optional properties:

- ieee80211-freq-limit: See ieee80211.txt

- mediatek,mtd-eeprom: Specify a MTD partition + offset containing EEPROM data

- big-endian: if the radio eeprom partition is written in big-endian, specify

  this property

- mediatek,eeprom-merge-otp: Merge EEPROM data with OTP data. Can be used on

  boards where the flash calibration data is generic and specific calibration

  data should be pulled from the OTP ROM

The MAC address can as well be set with corresponding optional properties

defined in net/ethernet.txt.

Optional nodes:

- led: Properties for a connected LED

  Optional properties:

    - led-sources: See Documentation/devicetree/bindings/leds/common.txt

&pcie {

	pcie0 {

		wifi@0,0 {

			compatible = "mediatek,mt76";

			reg = <0x0000 0 0 0 0>;

			ieee80211-freq-limit = <5000000 6000000>;

			mediatek,mtd-eeprom = <&factory 0x8000>;

			big-endian;

			led {

				led-sources = <2>;

			};

		};

	};

};

MT7628 example:

wmac: wmac@10300000 {

	compatible = "mediatek,mt7628-wmac";

	reg = <0x10300000 0x100000>;

	interrupt-parent = <&cpuintc>;

	interrupts = <6>;

	mediatek,mtd-eeprom = <&factory 0x0000>;

};

MT7622 example:

wmac: wmac@18000000 {

	compatible = "mediatek,mt7622-wmac";

	reg = <0 0x18000000 0 0x100000>;

	interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;

	mediatek,infracfg = <&infracfg>;

	power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;

};

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.

%YAML 1.2

---

$id: http://devicetree.org/schemas/net/wireless/mediatek,mt76.yaml#

$schema: http://devicetree.org/meta-schemas/core.yaml#

title: MediaTek mt76 wireless devices Generic Binding

maintainers:

  - Felix Fietkau <nbd@nbd.name>

  - Lorenzo Bianconi <lorenzo@kernel.org>

  - Ryder Lee <ryder.lee@mediatek.com>

description: |

  This node provides properties for configuring the MediaTek mt76xx

  wireless device. The node is expected to be specified as a child

  node of the PCI controller to which the wireless chip is connected.

  Alternatively, it can specify the wireless part of the MT7628/MT7688

  or MT7622 SoC.

allOf:

  - $ref: ieee80211.yaml#

properties:

  compatible:

    enum:

      - mediatek,mt76

      - mediatek,mt7628-wmac

      - mediatek,mt7622-wmac

  reg:

    maxItems: 1

  interrupts:

    maxItems: 1

  power-domains:

    maxItems: 1

  mediatek,infracfg:

    $ref: /schemas/types.yaml#/definitions/phandle

    description:

      Phandle to the infrastructure bus fabric syscon node.

      This property is MT7622 specific

  ieee80211-freq-limit: true

  mediatek,mtd-eeprom:

    $ref: /schemas/types.yaml#/definitions/phandle-array

    description:

      Phandle to a MTD partition + offset containing EEPROM data

  big-endian:

    $ref: /schemas/types.yaml#/definitions/flag

    description:

      Specify if the radio eeprom partition is written in big-endian

  mediatek,eeprom-merge-otp:

    type: boolean

    description:

      Merge EEPROM data with OTP data. Can be used on boards where the flash

      calibration data is generic and specific calibration data should be

      pulled from the OTP ROM

  led:

    type: object

    $ref: /schemas/leds/common.yaml#

    additionalProperties: false

    properties:

      led-sources:

        maxItems: 1

required:

  - compatible

  - reg

additionalProperties: false

examples:

  - |

    pcie0 {

      #address-cells = <3>;

      #size-cells = <2>;

      wifi@0,0 {

        compatible = "mediatek,mt76";

        reg = <0x0000 0 0 0 0>;

        ieee80211-freq-limit = <5000000 6000000>;

        mediatek,mtd-eeprom = <&factory 0x8000>;

        big-endian;

        led {

          led-sources = <2>;

        };

      };

    };

  - |

    wifi@10300000 {

      compatible = "mediatek,mt7628-wmac";

      reg = <0x10300000 0x100000>;

      interrupt-parent = <&cpuintc>;

      interrupts = <6>;

      mediatek,mtd-eeprom = <&factory 0x0>;

    };

  - |

    #include <dt-bindings/interrupt-controller/arm-gic.h>

    #include <dt-bindings/interrupt-controller/irq.h>

    wifi@18000000 {

      compatible = "mediatek,mt7622-wmac";

      reg = <0x10300000 0x100000>;

      interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;

      mediatek,infracfg = <&infracfg>;

      power-domains = <&scpsys 3>;

    };