Loading Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt 0 → 100644 +18 −0 Original line number Diff line number Diff line Bindings for I2S controller built into xtfpga Xtensa bitstreams. Required properties: - compatible: shall be "cdns,xtfpga-i2s". - reg: memory region (address and length) with device registers. - interrupts: interrupt for the device. - clocks: phandle to the clk used as master clock. I2S bus clock is derived from it. Examples: i2s0: xtfpga-i2s@0d080000 { #sound-dai-cells = <0>; compatible = "cdns,xtfpga-i2s"; reg = <0x0d080000 0x40>; interrupts = <2 1>; clocks = <&cdce706 4>; }; MAINTAINERS +1 −0 Original line number Diff line number Diff line Loading @@ -10669,6 +10669,7 @@ M: Max Filippov <jcmvbkbc@gmail.com> L: linux-xtensa@linux-xtensa.org S: Maintained F: drivers/spi/spi-xtensa-xtfpga.c F: sound/soc/xtensa/xtfpga-i2s.c YAM DRIVER FOR AX.25 M: Jean-Paul Roubelat <jpr@f6fbb.org> Loading sound/soc/Kconfig +1 −0 Original line number Diff line number Diff line Loading @@ -55,6 +55,7 @@ source "sound/soc/spear/Kconfig" source "sound/soc/tegra/Kconfig" source "sound/soc/txx9/Kconfig" source "sound/soc/ux500/Kconfig" source "sound/soc/xtensa/Kconfig" # Supported codecs source "sound/soc/codecs/Kconfig" Loading sound/soc/Makefile +1 −0 Original line number Diff line number Diff line Loading @@ -36,3 +36,4 @@ obj-$(CONFIG_SND_SOC) += spear/ obj-$(CONFIG_SND_SOC) += tegra/ obj-$(CONFIG_SND_SOC) += txx9/ obj-$(CONFIG_SND_SOC) += ux500/ obj-$(CONFIG_SND_SOC) += xtensa/ sound/soc/codecs/wm8960.c +48 −3 Original line number Diff line number Diff line Loading @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/pm.h> #include <linux/clk.h> #include <linux/i2c.h> #include <linux/slab.h> #include <sound/core.h> Loading Loading @@ -117,6 +118,7 @@ static bool wm8960_volatile(struct device *dev, unsigned int reg) } struct wm8960_priv { struct clk *mclk; struct regmap *regmap; int (*set_bias_level)(struct snd_soc_codec *, enum snd_soc_bias_level level); Loading Loading @@ -618,16 +620,40 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); int ret; switch (level) { case SND_SOC_BIAS_ON: break; case SND_SOC_BIAS_PREPARE: switch (codec->dapm.bias_level) { case SND_SOC_BIAS_STANDBY: if (!IS_ERR(wm8960->mclk)) { ret = clk_prepare_enable(wm8960->mclk); if (ret) { dev_err(codec->dev, "Failed to enable MCLK: %d\n", ret); return ret; } } /* Set VMID to 2x50k */ snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80); break; case SND_SOC_BIAS_ON: if (!IS_ERR(wm8960->mclk)) clk_disable_unprepare(wm8960->mclk); break; default: break; } break; case SND_SOC_BIAS_STANDBY: if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { regcache_sync(wm8960->regmap); Loading Loading @@ -674,7 +700,7 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); int reg; int reg, ret; switch (level) { case SND_SOC_BIAS_ON: Loading Loading @@ -715,9 +741,22 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, WM8960_VREF, WM8960_VREF); msleep(100); if (!IS_ERR(wm8960->mclk)) { ret = clk_prepare_enable(wm8960->mclk); if (ret) { dev_err(codec->dev, "Failed to enable MCLK: %d\n", ret); return ret; } } break; case SND_SOC_BIAS_ON: if (!IS_ERR(wm8960->mclk)) clk_disable_unprepare(wm8960->mclk); /* Enable anti-pop mode */ snd_soc_update_bits(codec, WM8960_APOP1, WM8960_POBCTRL | WM8960_SOFT_ST | Loading Loading @@ -1002,6 +1041,12 @@ static int wm8960_i2c_probe(struct i2c_client *i2c, if (wm8960 == NULL) return -ENOMEM; wm8960->mclk = devm_clk_get(&i2c->dev, "mclk"); if (IS_ERR(wm8960->mclk)) { if (PTR_ERR(wm8960->mclk) == -EPROBE_DEFER) return -EPROBE_DEFER; } wm8960->regmap = devm_regmap_init_i2c(i2c, &wm8960_regmap); if (IS_ERR(wm8960->regmap)) return PTR_ERR(wm8960->regmap); Loading Loading
Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt 0 → 100644 +18 −0 Original line number Diff line number Diff line Bindings for I2S controller built into xtfpga Xtensa bitstreams. Required properties: - compatible: shall be "cdns,xtfpga-i2s". - reg: memory region (address and length) with device registers. - interrupts: interrupt for the device. - clocks: phandle to the clk used as master clock. I2S bus clock is derived from it. Examples: i2s0: xtfpga-i2s@0d080000 { #sound-dai-cells = <0>; compatible = "cdns,xtfpga-i2s"; reg = <0x0d080000 0x40>; interrupts = <2 1>; clocks = <&cdce706 4>; };
MAINTAINERS +1 −0 Original line number Diff line number Diff line Loading @@ -10669,6 +10669,7 @@ M: Max Filippov <jcmvbkbc@gmail.com> L: linux-xtensa@linux-xtensa.org S: Maintained F: drivers/spi/spi-xtensa-xtfpga.c F: sound/soc/xtensa/xtfpga-i2s.c YAM DRIVER FOR AX.25 M: Jean-Paul Roubelat <jpr@f6fbb.org> Loading
sound/soc/Kconfig +1 −0 Original line number Diff line number Diff line Loading @@ -55,6 +55,7 @@ source "sound/soc/spear/Kconfig" source "sound/soc/tegra/Kconfig" source "sound/soc/txx9/Kconfig" source "sound/soc/ux500/Kconfig" source "sound/soc/xtensa/Kconfig" # Supported codecs source "sound/soc/codecs/Kconfig" Loading
sound/soc/Makefile +1 −0 Original line number Diff line number Diff line Loading @@ -36,3 +36,4 @@ obj-$(CONFIG_SND_SOC) += spear/ obj-$(CONFIG_SND_SOC) += tegra/ obj-$(CONFIG_SND_SOC) += txx9/ obj-$(CONFIG_SND_SOC) += ux500/ obj-$(CONFIG_SND_SOC) += xtensa/
sound/soc/codecs/wm8960.c +48 −3 Original line number Diff line number Diff line Loading @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/pm.h> #include <linux/clk.h> #include <linux/i2c.h> #include <linux/slab.h> #include <sound/core.h> Loading Loading @@ -117,6 +118,7 @@ static bool wm8960_volatile(struct device *dev, unsigned int reg) } struct wm8960_priv { struct clk *mclk; struct regmap *regmap; int (*set_bias_level)(struct snd_soc_codec *, enum snd_soc_bias_level level); Loading Loading @@ -618,16 +620,40 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); int ret; switch (level) { case SND_SOC_BIAS_ON: break; case SND_SOC_BIAS_PREPARE: switch (codec->dapm.bias_level) { case SND_SOC_BIAS_STANDBY: if (!IS_ERR(wm8960->mclk)) { ret = clk_prepare_enable(wm8960->mclk); if (ret) { dev_err(codec->dev, "Failed to enable MCLK: %d\n", ret); return ret; } } /* Set VMID to 2x50k */ snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80); break; case SND_SOC_BIAS_ON: if (!IS_ERR(wm8960->mclk)) clk_disable_unprepare(wm8960->mclk); break; default: break; } break; case SND_SOC_BIAS_STANDBY: if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { regcache_sync(wm8960->regmap); Loading Loading @@ -674,7 +700,7 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); int reg; int reg, ret; switch (level) { case SND_SOC_BIAS_ON: Loading Loading @@ -715,9 +741,22 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, WM8960_VREF, WM8960_VREF); msleep(100); if (!IS_ERR(wm8960->mclk)) { ret = clk_prepare_enable(wm8960->mclk); if (ret) { dev_err(codec->dev, "Failed to enable MCLK: %d\n", ret); return ret; } } break; case SND_SOC_BIAS_ON: if (!IS_ERR(wm8960->mclk)) clk_disable_unprepare(wm8960->mclk); /* Enable anti-pop mode */ snd_soc_update_bits(codec, WM8960_APOP1, WM8960_POBCTRL | WM8960_SOFT_ST | Loading Loading @@ -1002,6 +1041,12 @@ static int wm8960_i2c_probe(struct i2c_client *i2c, if (wm8960 == NULL) return -ENOMEM; wm8960->mclk = devm_clk_get(&i2c->dev, "mclk"); if (IS_ERR(wm8960->mclk)) { if (PTR_ERR(wm8960->mclk) == -EPROBE_DEFER) return -EPROBE_DEFER; } wm8960->regmap = devm_regmap_init_i2c(i2c, &wm8960_regmap); if (IS_ERR(wm8960->regmap)) return PTR_ERR(wm8960->regmap); Loading