Commit 1544df9a authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 

Pull ARM SoC driver updates from Arnd Bergmann:
 "The main change this time was the introduction of the drivers/genpd
  subsystem that gets split out from drivers/soc to keep common
  functionality together.

  The SCMI driver subsystem gets an update to version 3.2 of the
  specification. There are also updates to memory, reset and other
  firmware drivers.

  On the soc driver side, the updates are mostly cleanups across a
  number of Arm platforms. On driver for loongarch adds power management
  for DT based systems, another driver is for HiSilicon's Arm server
  chips with their HCCS system health interface.

  The remaining updates for the most part add support for additional
  hardware in existing drivers or contain minor cleanups. Most of these
  are for the Qualcomm Snapdragon platform"

* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
  bus: fsl-mc: Use common ranges functions
  soc: kunpeng_hccs: fix some sparse warnings about incorrect type
  soc: loongson2_pm: add power management support
  soc: dt-bindings: add loongson-2 pm
  soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
  genpd: rockchip: Add PD_VO entry for rv1126
  bus: ti-sysc: Fix cast to enum warning
  soc: kunpeng_hccs: add MAILBOX dependency
  MAINTAINERS: remove OXNAS entry
  dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
  irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
  soc: qcom: aoss: Tidy up qmp_send() callers
  soc: qcom: aoss: Format string in qmp_send()
  soc: qcom: aoss: Move length requirements from caller
  soc: kunpeng_hccs: fix size_t format string
  soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
  dt-bindings: firmware: qcom: scm: Updating VMID list
  firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
  firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
  firmware: imx: scu-irq: add imx_scu_irq_get_status
  ...
parents c66403f6 09959520

Documentation/ABI/testing/sysfs-devices-platform-kunpeng_hccs

0 → 100644
+81 −0
Original line number Diff line number Diff line 
What:		/sys/devices/platform/HISI04Bx:00/chipX/all_linked

What:		/sys/devices/platform/HISI04Bx:00/chipX/linked_full_lane

What:		/sys/devices/platform/HISI04Bx:00/chipX/crc_err_cnt

Date:		November 2023

KernelVersion:	6.6

Contact:	Huisong Li <lihuisong@huawei.org>

Description:

		The /sys/devices/platform/HISI04Bx:00/chipX/ directory

		contains read-only attributes exposing some summarization

		information of all HCCS ports under a specified chip.

		The X in 'chipX' indicates the Xth chip on platform.



		There are following attributes in this directory:



		================= ==== =========================================

		all_linked:       (RO) if all enabled ports on this chip are

				       linked (bool).

		linked_full_lane: (RO) if all linked ports on this chip are full

				       lane (bool).

		crc_err_cnt:      (RO) total CRC err count for all ports on this

				       chip.

		================= ==== =========================================



What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/all_linked

What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/linked_full_lane

What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/crc_err_cnt

Date:		November 2023

KernelVersion:	6.6

Contact:	Huisong Li <lihuisong@huawei.org>

Description:

		The /sys/devices/platform/HISI04Bx:00/chipX/dieY/ directory

		contains read-only attributes exposing some summarization

		information of all HCCS ports under a specified die.

		The Y in 'dieY' indicates the hardware id of the die on chip who

		has chip id X.



		There are following attributes in this directory:



		================= ==== =========================================

		all_linked:       (RO) if all enabled ports on this die are

				       linked (bool).

		linked_full_lane: (RO) if all linked ports on this die are full

				       lane (bool).

		crc_err_cnt:      (RO) total CRC err count for all ports on this

				       die.

		================= ==== =========================================



What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/type

What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/lane_mode

What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/enable

What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/cur_lane_num

What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/link_fsm

What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/lane_mask

What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/crc_err_cnt

Date:		November 2023

KernelVersion:	6.6

Contact:	Huisong Li <lihuisong@huawei.org>

Description:

		The /sys/devices/platform/HISI04Bx/chipX/dieX/hccsN/ directory

		contains read-only attributes exposing information about

		a HCCS port. The N value in 'hccsN' indicates this port id.

		The X in 'chipX' indicates the ID of the chip to which the

		HCCS port belongs. For example, X ranges from to 'n - 1' if the

		chip number on platform is n.

		The Y in 'dieY' indicates the hardware id of the die to which

		the hccs port belongs.

		Note: type, lane_mode and enable are fixed attributes on running

		platform.



		The HCCS port have the following attributes:



		============= ==== =============================================

		type:         (RO) port type (string), e.g. HCCS-v1 -> H32

		lane_mode:    (RO) the lane mode of this port (string), e.g. x8

		enable:       (RO) indicate if this port is enabled (bool).

		cur_lane_num: (RO) current lane number of this port.

		link_fsm:     (RO) link finite state machine of this port.

		lane_mask:    (RO) current lane mask of this port, every bit

			           indicates a lane.

		crc_err_cnt:  (RO) CRC err count on this port.

		============= ==== =============================================

Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml

+2 −2
Original line number Diff line number Diff line
@@ -82,7 +82,7 @@ additionalProperties: false 
examples:

  - |

    #include <dt-bindings/clock/qcom,rpmh.h>

    #include <dt-bindings/power/qcom-rpmpd.h>

    #include <dt-bindings/power/qcom,rpmhpd.h>

    clock-controller@af00000 {

      compatible = "qcom,sm8250-dispcc";

      reg = <0x0af00000 0x10000>;
@@ -103,7 +103,7 @@ examples: 
      #clock-cells = <1>;

      #reset-cells = <1>;

      #power-domain-cells = <1>;

      power-domains = <&rpmhpd SM8250_MMCX>;

      power-domains = <&rpmhpd RPMHPD_MMCX>;

      required-opps = <&rpmhpd_opp_low_svs>;

    };

...

Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml

+2 −2
Original line number Diff line number Diff line
@@ -51,7 +51,7 @@ unevaluatedProperties: false 
examples:

  - |

    #include <dt-bindings/clock/qcom,rpmh.h>

    #include <dt-bindings/power/qcom-rpmpd.h>

    #include <dt-bindings/power/qcom,rpmhpd.h>



    clock-controller@abf0000 {

      compatible = "qcom,sm8350-videocc";
@@ -59,7 +59,7 @@ examples: 
      clocks = <&rpmhcc RPMH_CXO_CLK>,

               <&rpmhcc RPMH_CXO_CLK_A>,

               <&sleep_clk>;

      power-domains = <&rpmhpd SM8350_MMCX>;

      power-domains = <&rpmhpd RPMHPD_MMCX>;

      required-opps = <&rpmhpd_opp_low_svs>;

      #clock-cells = <1>;

      #reset-cells = <1>;

Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml

+2 −2
Original line number Diff line number Diff line
@@ -64,7 +64,7 @@ examples: 
  - |

    #include <dt-bindings/clock/qcom,gcc-sm8450.h>

    #include <dt-bindings/clock/qcom,rpmh.h>

    #include <dt-bindings/power/qcom-rpmpd.h>

    #include <dt-bindings/power/qcom,rpmhpd.h>

    clock-controller@ade0000 {

      compatible = "qcom,sm8450-camcc";

      reg = <0xade0000 0x20000>;
@@ -72,7 +72,7 @@ examples: 
               <&rpmhcc RPMH_CXO_CLK>,

               <&rpmhcc RPMH_CXO_CLK_A>,

               <&sleep_clk>;

      power-domains = <&rpmhpd SM8450_MMCX>;

      power-domains = <&rpmhpd RPMHPD_MMCX>;

      required-opps = <&rpmhpd_opp_low_svs>;

      #clock-cells = <1>;

      #reset-cells = <1>;

Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml

+2 −2
Original line number Diff line number Diff line
@@ -76,7 +76,7 @@ examples: 
  - |

    #include <dt-bindings/clock/qcom,gcc-sm8450.h>

    #include <dt-bindings/clock/qcom,rpmh.h>

    #include <dt-bindings/power/qcom-rpmpd.h>

    #include <dt-bindings/power/qcom,rpmhpd.h>

    clock-controller@af00000 {

      compatible = "qcom,sm8450-dispcc";

      reg = <0x0af00000 0x10000>;
@@ -91,7 +91,7 @@ examples: 
      #clock-cells = <1>;

      #reset-cells = <1>;

      #power-domain-cells = <1>;

      power-domains = <&rpmhpd SM8450_MMCX>;

      power-domains = <&rpmhpd RPMHPD_MMCX>;

      required-opps = <&rpmhpd_opp_low_svs>;

    };

...