Commit 1517c6a3 authored by Jonathan Cameron's avatar Jonathan Cameron
Browse files

dt-bindings:iio:pressure:hoperf,hp03 yaml conversion 



One quirk in the txt file was that the xclr gpio was specified as
xclr-gpio rather than xclr-gpios. I've fixed that in the
yaml version.

Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Cc: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20201031134110.724233-9-jic23@kernel.org
parent b1b69ba7

Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml

0 → 100644
+47 −0
Original line number Diff line number Diff line 
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)

%YAML 1.2

---

$id: http://devicetree.org/schemas/iio/pressure/hoperf,hp03.yaml#

$schema: http://devicetree.org/meta-schemas/core.yaml#



title: HopeRF HP03 digital pressure/temperature sensors



maintainers:

  - Marek Vasut <marex@denx.de>



description: |

  Digital pressure and temperature sensor with an I2C interface.



properties:

  compatible:

    const: hoperf,hp03



  reg:

    maxItems: 1



  xclr-gpios:

    description:

      The XCLR pin is a reset of the ADC in the chip, it must be pulled

      HI before the conversion and readout of the value from the ADC

      registers and pulled LO afterward.

    maxItems: 1



required:

  - compatible

  - reg



additionalProperties: false



examples:

  - |

    i2c {

        #address-cells = <1>;

        #size-cells = <0>;



        pressure@77 {

            compatible = "hoperf,hp03";

            reg = <0x77>;

            xclr-gpios = <&portc 0 0x0>;

        };

    };

...

Documentation/devicetree/bindings/iio/pressure/hp03.txt

deleted100644 → 0
+0 −17
Original line number Diff line number Diff line 
HopeRF HP03 digital pressure/temperature sensors



Required properties:

- compatible: must be "hoperf,hp03"

- xclr-gpio: must be device tree identifier of the XCLR pin.

             The XCLR pin is a reset of the ADC in the chip,

             it must be pulled HI before the conversion and

             readout of the value from the ADC registers and

             pulled LO afterward.



Example:



hp03@77 {

	compatible = "hoperf,hp03";

	reg = <0x77>;

	xclr-gpio = <&portc 0 0x0>;

};