Commit 13265568 authored by Cai Huoqing's avatar Cai Huoqing Committed by David S. Miller
Browse files

net: hinic: Add control command support for VF PMD driver in DPDK 



HINIC has a mailbox for PF-VF communication and the VF driver
could send port control command to PF driver via mailbox.

The control command only can be set to register in PF,
so add support in PF driver for VF PMD driver control
command when VF PMD driver work with linux PF driver.

Then, no need to add handlers to nic_vf_cmd_msg_handler[],
because the host driver just forwards it to the firmware.
Actually the firmware works on a coprocessor MGMT_CPU(inside the NIC)
which will recv and deal with these commands.

Signed-off-by: default avatarCai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ac33d7ae

drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h

+66 −0
Original line number Diff line number Diff line
@@ -51,6 +51,9 @@ enum hinic_port_cmd { 
	HINIC_PORT_CMD_ADD_VLAN = 0x3,

	HINIC_PORT_CMD_DEL_VLAN = 0x4,



	HINIC_PORT_CMD_SET_ETS = 0x7,

	HINIC_PORT_CMD_GET_ETS = 0x8,



	HINIC_PORT_CMD_SET_PFC = 0x5,



	HINIC_PORT_CMD_SET_MAC = 0x9,
@@ -59,6 +62,8 @@ enum hinic_port_cmd { 


	HINIC_PORT_CMD_SET_RX_MODE = 0xC,



	HINIC_PORT_CMD_SET_ANTI_ATTACK_RATE = 0xD,



	HINIC_PORT_CMD_GET_PAUSE_INFO = 0x14,

	HINIC_PORT_CMD_SET_PAUSE_INFO = 0x15,
@@ -81,6 +86,7 @@ enum hinic_port_cmd { 
	HINIC_PORT_CMD_GET_RSS_TEMPLATE_INDIR_TBL = 0x25,



	HINIC_PORT_CMD_SET_PORT_STATE = 0x29,

	HINIC_PORT_CMD_GET_PORT_STATE = 0x30,



	HINIC_PORT_CMD_SET_RSS_TEMPLATE_TBL = 0x2B,
@@ -100,17 +106,29 @@ enum hinic_port_cmd { 


	HINIC_PORT_CMD_RSS_CFG = 0x42,



	HINIC_PORT_CMD_GET_PHY_TYPE = 0x44,



	HINIC_PORT_CMD_FWCTXT_INIT = 0x45,



	HINIC_PORT_CMD_GET_LOOPBACK_MODE = 0x48,

	HINIC_PORT_CMD_SET_LOOPBACK_MODE = 0x49,



	HINIC_PORT_CMD_GET_JUMBO_FRAME_SIZE = 0x4A,

	HINIC_PORT_CMD_SET_JUMBO_FRAME_SIZE = 0x4B,



	HINIC_PORT_CMD_ENABLE_SPOOFCHK = 0x4E,



	HINIC_PORT_CMD_GET_MGMT_VERSION = 0x58,



	HINIC_PORT_CMD_GET_PORT_TYPE = 0x5B,



	HINIC_PORT_CMD_SET_FUNC_STATE = 0x5D,



	HINIC_PORT_CMD_GET_PORT_ID_BY_FUNC_ID = 0x5E,



	HINIC_PORT_CMD_GET_DMA_CS = 0x64,

	HINIC_PORT_CMD_SET_DMA_CS = 0x65,



	HINIC_PORT_CMD_GET_GLOBAL_QPN = 0x66,



	HINIC_PORT_CMD_SET_VF_RATE = 0x69,
@@ -125,25 +143,73 @@ enum hinic_port_cmd { 


	HINIC_PORT_CMD_SET_RQ_IQ_MAP = 0x73,



	HINIC_PORT_CMD_SET_PFC_THD = 0x75,



	HINIC_PORT_CMD_LINK_STATUS_REPORT = 0xA0,



	HINIC_PORT_CMD_SET_LOSSLESS_ETH	= 0xA3,



	HINIC_PORT_CMD_UPDATE_MAC = 0xA4,



	HINIC_PORT_CMD_GET_CAP = 0xAA,



	HINIC_PORT_CMD_UP_TC_ADD_FLOW = 0xAF,

	HINIC_PORT_CMD_UP_TC_DEL_FLOW = 0xB0,

	HINIC_PORT_CMD_UP_TC_GET_FLOW = 0xB1,



	HINIC_PORT_CMD_UP_TC_FLUSH_TCAM = 0xB2,



	HINIC_PORT_CMD_UP_TC_CTRL_TCAM_BLOCK = 0xB3,



	HINIC_PORT_CMD_UP_TC_ENABLE = 0xB4,



	HINIC_PORT_CMD_UP_TC_GET_TCAM_BLOCK = 0xB5,



	HINIC_PORT_CMD_SET_IPSU_MAC = 0xCB,

	HINIC_PORT_CMD_GET_IPSU_MAC = 0xCC,



	HINIC_PORT_CMD_SET_XSFP_STATUS = 0xD4,



	HINIC_PORT_CMD_GET_LINK_MODE = 0xD9,



	HINIC_PORT_CMD_SET_SPEED = 0xDA,



	HINIC_PORT_CMD_SET_AUTONEG = 0xDB,



	HINIC_PORT_CMD_CLEAR_QP_RES = 0xDD,



	HINIC_PORT_CMD_SET_SUPER_CQE = 0xDE,



	HINIC_PORT_CMD_SET_VF_COS = 0xDF,

	HINIC_PORT_CMD_GET_VF_COS = 0xE1,



	HINIC_PORT_CMD_CABLE_PLUG_EVENT	= 0xE5,



	HINIC_PORT_CMD_LINK_ERR_EVENT = 0xE6,



	HINIC_PORT_CMD_SET_COS_UP_MAP = 0xE8,



	HINIC_PORT_CMD_RESET_LINK_CFG = 0xEB,



	HINIC_PORT_CMD_GET_STD_SFP_INFO = 0xF0,



	HINIC_PORT_CMD_FORCE_PKT_DROP = 0xF3,



	HINIC_PORT_CMD_SET_LRO_TIMER = 0xF4,



	HINIC_PORT_CMD_SET_VHD_CFG = 0xF7,



	HINIC_PORT_CMD_SET_LINK_FOLLOW = 0xF8,



	HINIC_PORT_CMD_SET_VF_MAX_MIN_RATE = 0xF9,



	HINIC_PORT_CMD_GET_SFP_ABS = 0xFB,



	HINIC_PORT_CMD_Q_FILTER	= 0xFC,



	HINIC_PORT_CMD_TCAM_FILTER = 0xFE,



	HINIC_PORT_CMD_SET_VLAN_FILTER = 0xFF,

};



/* cmd of mgmt CPU message for HILINK module */

drivers/net/ethernet/huawei/hinic/hinic_sriov.c

+18 −0
Original line number Diff line number Diff line
@@ -489,6 +489,24 @@ static struct vf_cmd_check_handle nic_cmd_support_vf[] = { 
	{HINIC_PORT_CMD_UPDATE_MAC, hinic_mbox_check_func_id_8B},

	{HINIC_PORT_CMD_GET_CAP, hinic_mbox_check_func_id_8B},

	{HINIC_PORT_CMD_GET_LINK_MODE, hinic_mbox_check_func_id_8B},

	{HINIC_PORT_CMD_GET_VF_COS, NULL},

	{HINIC_PORT_CMD_SET_VHD_CFG, hinic_mbox_check_func_id_8B},

	{HINIC_PORT_CMD_SET_VLAN_FILTER, hinic_mbox_check_func_id_8B},

	{HINIC_PORT_CMD_Q_FILTER, hinic_mbox_check_func_id_8B},

	{HINIC_PORT_CMD_TCAM_FILTER, NULL},

	{HINIC_PORT_CMD_UP_TC_ADD_FLOW, NULL},

	{HINIC_PORT_CMD_UP_TC_DEL_FLOW, NULL},

	{HINIC_PORT_CMD_UP_TC_FLUSH_TCAM, hinic_mbox_check_func_id_8B},

	{HINIC_PORT_CMD_UP_TC_CTRL_TCAM_BLOCK, hinic_mbox_check_func_id_8B},

	{HINIC_PORT_CMD_UP_TC_ENABLE, hinic_mbox_check_func_id_8B},

	{HINIC_PORT_CMD_CABLE_PLUG_EVENT, NULL},

	{HINIC_PORT_CMD_LINK_ERR_EVENT, NULL},

	{HINIC_PORT_CMD_SET_PORT_STATE, hinic_mbox_check_func_id_8B},

	{HINIC_PORT_CMD_SET_ETS, NULL},

	{HINIC_PORT_CMD_SET_ANTI_ATTACK_RATE, NULL},

	{HINIC_PORT_CMD_RESET_LINK_CFG, hinic_mbox_check_func_id_8B},

	{HINIC_PORT_CMD_SET_LINK_FOLLOW, NULL},

	{HINIC_PORT_CMD_CLEAR_QP_RES, NULL},

};



#define CHECK_IPSU_15BIT	0X8000