Commit 10816289 authored by Konrad Dybcio's avatar Konrad Dybcio Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: sdm845-*: Fix up comments 



Switch '//' comments to C-style /* */.
Make sure all multiline C-style commends begin with just '/*' with
the comment text starting on a new line.

Signed-off-by: default avatarKonrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107145522.6706-7-konrad.dybcio@linaro.org
parent b47fac7a

arch/arm64/boot/dts/qcom/sdm845-db845c.dts

+23 −15
Original line number Diff line number Diff line
@@ -120,9 +120,11 @@ 
		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;



		// TODO: make it possible to drive same GPIO from two clients

		// gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;

		// enable-active-high;

		/*

		 * TODO: make it possible to drive same GPIO from two clients

		 * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;

		 * enable-active-high;

		 */

	};



	pcie0_1p05v: pcie-0-1p05v-regulator {
@@ -133,9 +135,11 @@ 
		regulator-min-microvolt = <1050000>;

		regulator-max-microvolt = <1050000>;



		// TODO: make it possible to drive same GPIO from two clients

		// gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;

		// enable-active-high;

		/*

		 * TODO: make it possible to drive same GPIO from two clients

		 * gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;

		 * enable-active-high;

		 */

	};



	cam0_dvdd_1v2: reg_cam0_dvdd_1v2 {
@@ -195,9 +199,11 @@ 
		regulator-min-microvolt = <500000>;

		regulator-max-microvolt = <500000>;



		// TODO: make it possible to drive same GPIO from two clients

		// gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;

		// enable-active-high;

		/*

		 * TODO: make it possible to drive same GPIO from two clients

		 * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;

		 * enable-active-high;

		 */

	};



	vbat: vbat-regulator {
@@ -1196,7 +1202,7 @@ 
		compatible = "ovti,ov8856";

		reg = <0x10>;



		// CAM0_RST_N

		/* CAM0_RST_N */

		reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;

		pinctrl-names = "default";

		pinctrl-0 = <&cam0_default>;
@@ -1205,7 +1211,8 @@ 
		clock-names = "xvclk";

		clock-frequency = <19200000>;



		/* The &vreg_s4a_1p8 trace is powered on as a,

		/*

		 * The &vreg_s4a_1p8 trace is powered on as a,

		 * so it is represented by a fixed regulator.

		 *

		 * The 2.8V vdda-supply and 1.2V vddd-supply regulators
@@ -1233,10 +1240,10 @@ 
	camera@60 {

		compatible = "ovti,ov7251";



		// I2C address as per ov7251.txt linux documentation

		/* I2C address as per ov7251.txt linux documentation */

		reg = <0x60>;



		// CAM3_RST_N

		/* CAM3_RST_N */

		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&cam3_default>;
@@ -1245,7 +1252,8 @@ 
		clock-names = "xclk";

		clock-frequency = <24000000>;



		/* The &vreg_s4a_1p8 trace always powered on.

		/*

		 * The &vreg_s4a_1p8 trace always powered on.

		 *

		 * The 2.8V vdda-supply regulator is enabled when the

		 * vreg_s4a_1p8 trace is pulled high.
@@ -1261,7 +1269,7 @@ 
		port {

			ov7251_ep: endpoint {

				data-lanes = <0 1>;

//				remote-endpoint = <&csiphy3_ep>;

/*				remote-endpoint = <&csiphy3_ep>; */

			};

		};

	};

arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi

+3 −2
Original line number Diff line number Diff line
@@ -50,7 +50,8 @@ 
	};



	reserved-memory {

		/* The rmtfs_mem needs to be guarded due to "XPU limitations"

		/*

		 * The rmtfs_mem needs to be guarded due to "XPU limitations"

		 * it is otherwise possible for an allocation adjacent to the

		 * rmtfs_mem region to trigger an XPU violation, causing a crash.

		 */

arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts

+1 −1
Original line number Diff line number Diff line
@@ -43,7 +43,7 @@ 
		#size-cells = <2>;

		ranges;



		// Firmware initialized the display at 1280p instead of 1440p

		/* Firmware initialized the display at 1280p instead of 1440p */

		framebuffer0: framebuffer@80400000 {

			compatible = "simple-framebuffer";

			reg = <0 0x80400000 0 (1920 * 1280 * 4)>;