Commit 0fd3a8f5 authored by Tudor Ambarus's avatar Tudor Ambarus Committed by Alexandre Belloni
Browse files

ARM: dts: at91: sam9x60ek: Add sdmmc1 node 



sdmmc1 is not populated by default on sam9x60ek, but there are cases
where it is populated with wilc3000. Add the node, but keep it disabled.

Signed-off-by: default avatarTudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20200403061222.1277147-4-tudor.ambarus@microchip.com


Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@bootlin.com>
parent 471f0532

arch/arm/boot/dts/at91-sam9x60ek.dts

+21 −0
Original line number Diff line number Diff line
@@ -542,6 +542,18 @@ 
		};

	};



	sdmmc1 {

		pinctrl_sdmmc1_default: sdmmc1 {

			atmel,pins =

				<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA13 CK periph B */

				 AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA12 CMD periph B with pullup */

				 AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA11 DAT0 periph B with pullup */

				 AT91_PIOA  2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA2 DAT1 periph B with pullup */

				 AT91_PIOA  3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA3 DAT2 periph B with pullup */

				 AT91_PIOA  4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA4 DAT3 periph B with pullup */

		};

	};



	gpio_keys {

		pinctrl_key_gpio_default: pinctrl_key_gpio {

			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
@@ -568,6 +580,15 @@ 
	disable-wp;

};



&sdmmc1 {

	bus-width = <4>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_sdmmc1_default>;

	no-1-8-v;

	non-removable;

	status = "disabled"; /* Conflict with flx4. */

};



&qspi {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_qspi>;