Commit 0ed99ecc authored by Robert Hancock's avatar Robert Hancock Committed by David S. Miller
Browse files

net: phy: marvell: update abilities and advertising when switching to SGMII 



With some SFP modules, such as Finisar FCLF8522P2BTL, the PHY hardware
strapping defaults to 1000BaseX mode, but the kernel prefers to set them
for SGMII mode. When this happens and the PHY is soft reset, the BMSR
status register is updated, but this happens after the kernel has already
read the PHY abilities during probing. This results in support not being
detected for, and the PHY not advertising support for, 10 and 100 Mbps
modes, preventing the link from working with a non-gigabit link partner.

When the PHY is being configured for SGMII mode, call genphy_read_abilities
again in order to re-read the capabilities, and update the advertising
field accordingly.

Signed-off-by: default avatarRobert Hancock <robert.hancock@calian.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 48cec73a

drivers/net/phy/marvell.c

+15 −1
Original line number Diff line number Diff line
@@ -961,7 +961,21 @@ static int m88e1111_config_init(struct phy_device *phydev) 
	if (err < 0)

		return err;



	return genphy_soft_reset(phydev);

	err = genphy_soft_reset(phydev);

	if (err < 0)

		return err;



	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {

		/* If the HWCFG_MODE was changed from another mode (such as

		 * 1000BaseX) to SGMII, the state of the support bits may have

		 * also changed now that the PHY has been reset.

		 * Update the PHY abilities accordingly.

		 */

		err = genphy_read_abilities(phydev);

		linkmode_or(phydev->advertising, phydev->advertising,

			    phydev->supported);

	}

	return err;

}



static int m88e1111_get_downshift(struct phy_device *phydev, u8 *data)