Loading arch/arm/mach-prima2/rstc.c +28 −17 Original line number Diff line number Diff line Loading @@ -19,6 +19,7 @@ static DEFINE_MUTEX(rstc_lock); static struct of_device_id rstc_ids[] = { { .compatible = "sirf,prima2-rstc" }, { .compatible = "sirf,marco-rstc" }, {}, }; Loading @@ -42,16 +43,14 @@ early_initcall(sirfsoc_of_rstc_init); int sirfsoc_reset_device(struct device *dev) { const unsigned int *prop = of_get_property(dev->of_node, "reset-bit", NULL); unsigned int reset_bit; u32 reset_bit; if (!prop) return -ENODEV; reset_bit = be32_to_cpup(prop); if (of_property_read_u32(dev->of_node, "reset-bit", &reset_bit)) return -EINVAL; mutex_lock(&rstc_lock); if (of_device_is_compatible(dev->of_node, "sirf,prima2-rstc")) { /* * Writing 1 to this bit resets corresponding block. Writing 0 to this * bit de-asserts reset signal of the corresponding block. Loading @@ -63,6 +62,18 @@ int sirfsoc_reset_device(struct device *dev) msleep(10); writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 4); } else { /* * For MARCO and POLO * Writing 1 to SET register resets corresponding block. Writing 1 to CLEAR * register de-asserts reset signal of the corresponding block. * datasheet doesn't require explicit delay between the set and clear * of reset bit. it could be shorter if tests pass. */ writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8); msleep(10); writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4); } mutex_unlock(&rstc_lock); Loading Loading
arch/arm/mach-prima2/rstc.c +28 −17 Original line number Diff line number Diff line Loading @@ -19,6 +19,7 @@ static DEFINE_MUTEX(rstc_lock); static struct of_device_id rstc_ids[] = { { .compatible = "sirf,prima2-rstc" }, { .compatible = "sirf,marco-rstc" }, {}, }; Loading @@ -42,16 +43,14 @@ early_initcall(sirfsoc_of_rstc_init); int sirfsoc_reset_device(struct device *dev) { const unsigned int *prop = of_get_property(dev->of_node, "reset-bit", NULL); unsigned int reset_bit; u32 reset_bit; if (!prop) return -ENODEV; reset_bit = be32_to_cpup(prop); if (of_property_read_u32(dev->of_node, "reset-bit", &reset_bit)) return -EINVAL; mutex_lock(&rstc_lock); if (of_device_is_compatible(dev->of_node, "sirf,prima2-rstc")) { /* * Writing 1 to this bit resets corresponding block. Writing 0 to this * bit de-asserts reset signal of the corresponding block. Loading @@ -63,6 +62,18 @@ int sirfsoc_reset_device(struct device *dev) msleep(10); writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 4); } else { /* * For MARCO and POLO * Writing 1 to SET register resets corresponding block. Writing 1 to CLEAR * register de-asserts reset signal of the corresponding block. * datasheet doesn't require explicit delay between the set and clear * of reset bit. it could be shorter if tests pass. */ writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8); msleep(10); writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4); } mutex_unlock(&rstc_lock); Loading