Commit 0e627545 authored by Mathias Nyman's avatar Mathias Nyman Committed by Greg Kroah-Hartman
Browse files

xhci: clear usb2 resume related variables in one place. 



Initially resume related USB2 variables were cleared once port
successfully resumed to U0. Later code was added to clean up
stale resume variables in case of port failed to resume to U0.

Clear the variables in one place after port is no longer resuming
or in suspended U3 state.

Signed-off-by: default avatarMathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230202150505.618915-11-mathias.nyman@linux.intel.com


Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent a909d629

drivers/usb/host/xhci-hub.c

+16 −22
Original line number Diff line number Diff line
@@ -1090,7 +1090,6 @@ static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status, 
	struct xhci_bus_state *bus_state;

	u32 link_state;

	u32 portnum;

	int ret;



	bus_state = &port->rhub->bus_state;

	link_state = portsc & PORT_PLS_MASK;
@@ -1106,23 +1105,30 @@ static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status, 
		if (link_state == XDEV_U2)

			*status |= USB_PORT_STAT_L1;

		if (link_state == XDEV_U0) {

			if (port->resume_timestamp)

				usb_hcd_end_port_resume(&port->rhub->hcd->self,

							portnum);

			port->resume_timestamp = 0;

			clear_bit(portnum, &bus_state->resuming_ports);

			if (bus_state->suspended_ports & (1 << portnum)) {

				bus_state->suspended_ports &= ~(1 << portnum);

				bus_state->port_c_suspend |= 1 << portnum;

			}

		}

		if (link_state == XDEV_RESUME) {

			ret = xhci_handle_usb2_port_link_resume(port, status,

								portsc, flags);

			if (ret)

				return;

			xhci_handle_usb2_port_link_resume(port, status, portsc,

							  flags);

		}

	}



	/*

	 * Clear usb2 resume signalling variables if port is no longer suspended

	 * or resuming. Port either resumed to U0/U1/U2, disconnected, or in a

	 * error state. Resume related variables should be cleared in all those cases.

	 */

	if ((link_state != XDEV_U3 &&

	     link_state != XDEV_RESUME) &&

	    (port->resume_timestamp ||

	     test_bit(portnum, &bus_state->resuming_ports))) {

		port->resume_timestamp = 0;

		clear_bit(portnum, &bus_state->resuming_ports);

		usb_hcd_end_port_resume(&port->rhub->hcd->self, portnum);

	}

}



/*
@@ -1177,18 +1183,6 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, 
	else

		xhci_get_usb2_port_status(port, &status, raw_port_status,

					  flags);

	/*

	 * Clear stale usb2 resume signalling variables in case port changed

	 * state during resume signalling. For example on error

	 */

	if ((port->resume_timestamp ||

	     test_bit(wIndex, &bus_state->resuming_ports)) &&

	    (raw_port_status & PORT_PLS_MASK) != XDEV_U3 &&

	    (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) {

		port->resume_timestamp = 0;

		clear_bit(wIndex, &bus_state->resuming_ports);

		usb_hcd_end_port_resume(&hcd->self, wIndex);

	}



	if (bus_state->port_c_suspend & (1 << wIndex))

		status |= USB_PORT_STAT_C_SUSPEND << 16;