Commit 0b4de252 authored by Hakan Jansson's avatar Hakan Jansson Committed by Luiz Augusto von Dentz
Browse files

dt-bindings: net: broadcom-bluetooth: Add property for autobaud mode 



Add property, "brcm,requires-autobaud-mode", to enable autobaud mode
selection.

Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading.
Autobaud mode can also be required on some boards where the controller
device is using a non-standard baud rate when first powered on.

Signed-off-by: default avatarHakan Jansson <hakan.jansson@infineon.com>
Reviewed-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent bde63e9e

Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml

+7 −0
Original line number Diff line number Diff line
@@ -92,6 +92,13 @@ properties: 
       pcm-sync-mode: slave, master

       pcm-clock-mode: slave, master



  brcm,requires-autobaud-mode:

    type: boolean

    description:

      Set this property if autobaud mode is required. Autobaud mode is required

      if the device's initial baud rate in normal mode is not supported by the

      host or if the device requires autobaud mode startup before loading FW.



  interrupts:

    items:

      - description: Handle to the line HOST_WAKE used to wake