Commit 0ab1b2d1 authored by Jonathan Marek's avatar Jonathan Marek Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: add sm8150 hdk dts 



Add initial HDK855 dts, based on sm8150-mtp, with a few changes.

Signed-off-by: default avatarJonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200609194030.17756-8-jonathan@marek.ca


Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 46a6f297

arch/arm64/boot/dts/qcom/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -45,5 +45,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb 
dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-mtp.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-beryllium.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-mtp.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-mtp.dtb

arch/arm64/boot/dts/qcom/sm8150-hdk.dts

0 → 100644
+463 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: BSD-3-Clause

/*

 * Copyright (c) 2020, The Linux Foundation. All rights reserved.

 */



/dts-v1/;



#include <dt-bindings/regulator/qcom,rpmh-regulator.h>

#include <dt-bindings/gpio/gpio.h>

#include "sm8150.dtsi"

#include "pm8150.dtsi"

#include "pm8150b.dtsi"

#include "pm8150l.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. SM8150 HDK";

	compatible = "qcom,sm8150-hdk", "qcom,sm8150";



	aliases {

		serial0 = &uart2;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};



	vph_pwr: vph-pwr-regulator {

		compatible = "regulator-fixed";

		regulator-name = "vph_pwr";

		regulator-min-microvolt = <3700000>;

		regulator-max-microvolt = <3700000>;

	};



	vreg_s4a_1p8: pm8150-s4 {

		compatible = "regulator-fixed";

		regulator-name = "vreg_s4a_1p8";



		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;



		regulator-always-on;

		regulator-boot-on;



		vin-supply = <&vph_pwr>;

	};



	gpio_keys {

		compatible = "gpio-keys";



		vol-up {

			label = "Volume Up";

			linux,code = <KEY_VOLUMEUP>;

			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;

		};

	};

};



&apps_rsc {

	pm8150-rpmh-regulators {

		compatible = "qcom,pm8150-rpmh-regulators";

		qcom,pmic-id = "a";



		vdd-s1-supply = <&vph_pwr>;

		vdd-s2-supply = <&vph_pwr>;

		vdd-s3-supply = <&vph_pwr>;

		vdd-s4-supply = <&vph_pwr>;

		vdd-s5-supply = <&vph_pwr>;

		vdd-s6-supply = <&vph_pwr>;

		vdd-s7-supply = <&vph_pwr>;

		vdd-s8-supply = <&vph_pwr>;

		vdd-s9-supply = <&vph_pwr>;

		vdd-s10-supply = <&vph_pwr>;



		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;

		vdd-l2-l10-supply = <&vreg_bob>;

		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;

		vdd-l6-l9-supply = <&vreg_s8c_1p3>;

		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;

		vdd-l13-l16-l17-supply = <&vreg_bob>;



		vreg_s5a_2p0: smps5 {

			regulator-min-microvolt = <1904000>;

			regulator-max-microvolt = <2000000>;

		};



		vreg_s6a_0p9: smps6 {

			regulator-min-microvolt = <920000>;

			regulator-max-microvolt = <1128000>;

		};



		vdda_wcss_pll:

		vreg_l1a_0p75: ldo1 {

			regulator-min-microvolt = <752000>;

			regulator-max-microvolt = <752000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vdd_pdphy:

		vdda_usb_hs_3p1:

		vreg_l2a_3p1: ldo2 {

			regulator-min-microvolt = <3072000>;

			regulator-max-microvolt = <3072000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l3a_0p8: ldo3 {

			regulator-min-microvolt = <480000>;

			regulator-max-microvolt = <932000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vdd_usb_hs_core:

		vdda_csi_0_0p9:

		vdda_csi_1_0p9:

		vdda_csi_2_0p9:

		vdda_csi_3_0p9:

		vdda_dsi_0_0p9:

		vdda_dsi_1_0p9:

		vdda_dsi_0_pll_0p9:

		vdda_dsi_1_pll_0p9:

		vdda_pcie_1ln_core:

		vdda_pcie_2ln_core:

		vdda_pll_hv_cc_ebi01:

		vdda_pll_hv_cc_ebi23:

		vdda_qrefs_0p875_5:

		vdda_sp_sensor:

		vdda_ufs_2ln_core_1:

		vdda_ufs_2ln_core_2:

		vdda_usb_ss_dp_core_1:

		vdda_usb_ss_dp_core_2:

		vdda_qlink_lv:

		vdda_qlink_lv_ck:

		vreg_l5a_0p875: ldo5 {

			regulator-min-microvolt = <880000>;

			regulator-max-microvolt = <880000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l6a_1p2: ldo6 {

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l7a_1p8: ldo7 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vddpx_10:

		vreg_l9a_1p2: ldo9 {

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l10a_2p5: ldo10 {

			regulator-min-microvolt = <2504000>;

			regulator-max-microvolt = <2960000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l11a_0p8: ldo11 {

			regulator-min-microvolt = <800000>;

			regulator-max-microvolt = <800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vdd_qfprom:

		vdd_qfprom_sp:

		vdda_apc_cs_1p8:

		vdda_gfx_cs_1p8:

		vdda_usb_hs_1p8:

		vdda_qrefs_vref_1p8:

		vddpx_10_a:

		vreg_l12a_1p8: ldo12 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l13a_2p7: ldo13 {

			regulator-min-microvolt = <2704000>;

			regulator-max-microvolt = <2704000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l14a_1p8: ldo14 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1880000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l15a_1p7: ldo15 {

			regulator-min-microvolt = <1704000>;

			regulator-max-microvolt = <1704000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l16a_2p7: ldo16 {

			regulator-min-microvolt = <2704000>;

			regulator-max-microvolt = <2960000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l17a_3p0: ldo17 {

			regulator-min-microvolt = <2856000>;

			regulator-max-microvolt = <3008000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};

	};



	pm8150l-rpmh-regulators {

		compatible = "qcom,pm8150l-rpmh-regulators";

		qcom,pmic-id = "c";



		vdd-s1-supply = <&vph_pwr>;

		vdd-s2-supply = <&vph_pwr>;

		vdd-s3-supply = <&vph_pwr>;

		vdd-s4-supply = <&vph_pwr>;

		vdd-s5-supply = <&vph_pwr>;

		vdd-s6-supply = <&vph_pwr>;

		vdd-s7-supply = <&vph_pwr>;

		vdd-s8-supply = <&vph_pwr>;



		vdd-l1-l8-supply = <&vreg_s4a_1p8>;

		vdd-l2-l3-supply = <&vreg_s8c_1p3>;

		vdd-l4-l5-l6-supply = <&vreg_bob>;

		vdd-l7-l11-supply = <&vreg_bob>;

		vdd-l9-l10-supply = <&vreg_bob>;



		vdd-bob-supply = <&vph_pwr>;

		vdd-flash-supply = <&vreg_bob>;

		vdd-rgb-supply = <&vreg_bob>;



		vreg_bob: bob {

			regulator-min-microvolt = <3008000>;

			regulator-max-microvolt = <4000000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;

			regulator-allow-bypass;

		};



		vreg_s8c_1p3: smps8 {

			regulator-min-microvolt = <1352000>;

			regulator-max-microvolt = <1352000>;

		};



		vreg_l1c_1p8: ldo1 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vdda_wcss_adcdac_1:

		vdda_wcss_adcdac_22:

		vreg_l2c_1p3: ldo2 {

			regulator-min-microvolt = <1304000>;

			regulator-max-microvolt = <1304000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vdda_hv_ebi0:

		vdda_hv_ebi1:

		vdda_hv_ebi2:

		vdda_hv_ebi3:

		vdda_hv_refgen0:

		vdda_qlink_hv_ck:

		vreg_l3c_1p2: ldo3 {

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vddpx_5:

		vreg_l4c_1p8: ldo4 {

			regulator-min-microvolt = <1704000>;

			regulator-max-microvolt = <2928000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vddpx_6:

		vreg_l5c_1p8: ldo5 {

			regulator-min-microvolt = <1704000>;

			regulator-max-microvolt = <2928000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vddpx_2:

		vreg_l6c_2p9: ldo6 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <2960000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l7c_3p0: ldo7 {

			regulator-min-microvolt = <2856000>;

			regulator-max-microvolt = <3104000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l8c_1p8: ldo8 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l9c_2p9: ldo9 {

			regulator-min-microvolt = <2704000>;

			regulator-max-microvolt = <2960000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l10c_3p3: ldo10 {

			regulator-min-microvolt = <3000000>;

			regulator-max-microvolt = <3312000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l11c_3p3: ldo11 {

			regulator-min-microvolt = <3000000>;

			regulator-max-microvolt = <3312000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};

	};



	pm8009-rpmh-regulators {

		compatible = "qcom,pm8009-rpmh-regulators";

		qcom,pmic-id = "f";



		vdd-s1-supply = <&vph_pwr>;

		vdd-s2-supply = <&vreg_bob>;



		vdd-l2-supply = <&vreg_s8c_1p3>;

		vdd-l5-l6-supply = <&vreg_bob>;



		vreg_l2f_1p2: ldo2 {

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l5f_2p85: ldo5 {

			regulator-min-microvolt = <2800000>;

			regulator-max-microvolt = <2800000>;

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

		};



		vreg_l6f_2p85: ldo6 {

			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

			regulator-min-microvolt = <2856000>;

			regulator-max-microvolt = <2856000>;

		};

	};

};



&qupv3_id_1 {

	status = "okay";

};



&pon {

	pwrkey {

		status = "okay";

	};



	resin {

		compatible = "qcom,pm8941-resin";

		interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;

		debounce = <15625>;

		bias-pull-up;

		linux,code = <KEY_VOLUMEDOWN>;

	};

};



&remoteproc_adsp {

	status = "okay";



	firmware-name = "qcom/sm8150/adsp.mbn";

};



&remoteproc_cdsp {

	status = "okay";



	firmware-name = "qcom/sm8150/cdsp.mbn";

};



&remoteproc_slpi {

	status = "okay";



	firmware-name = "qcom/sm8150/slpi.mbn";

};



&tlmm {

	gpio-reserved-ranges = <0 4>, <126 4>;

};



&uart2 {

	status = "okay";

};



&ufs_mem_hc {

	status = "okay";



	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;



	vcc-supply = <&vreg_l10a_2p5>;

	vcc-max-microamp = <750000>;

	vccq-supply = <&vreg_l9a_1p2>;

	vccq-max-microamp = <700000>;

	vccq2-supply = <&vreg_s4a_1p8>;

	vccq2-max-microamp = <750000>;

};



&ufs_mem_phy {

	status = "okay";



	vdda-phy-supply = <&vdda_ufs_2ln_core_1>;

	vdda-max-microamp = <90200>;

	vdda-pll-supply = <&vreg_l3c_1p2>;

	vdda-pll-max-microamp = <19000>;

};



&usb_1_hsphy {

	status = "okay";

	vdda-pll-supply = <&vdd_usb_hs_core>;

	vdda33-supply = <&vdda_usb_hs_3p1>;

	vdda18-supply = <&vdda_usb_hs_1p8>;

};



&usb_2_hsphy {

	status = "okay";

	vdda-pll-supply = <&vdd_usb_hs_core>;

	vdda33-supply = <&vdda_usb_hs_3p1>;

	vdda18-supply = <&vdda_usb_hs_1p8>;

};



&usb_1_qmpphy {

	status = "okay";

	vdda-phy-supply = <&vreg_l3c_1p2>;

	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;

};



&usb_2_qmpphy {

	status = "okay";

	vdda-phy-supply = <&vreg_l3c_1p2>;

	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;

};



&usb_1 {

	status = "okay";

};



&usb_2 {

	status = "okay";

};



&usb_1_dwc3 {

	dr_mode = "peripheral";

};



&usb_2_dwc3 {

	dr_mode = "host";

};