Commit 0222ee53 authored by Jakub Kicinski's avatar Jakub Kicinski Committed by David S. Miller
Browse files

amd: lance: use eth_hw_addr_set() 



IO reads, so save to an array then eth_hw_addr_set().

Fixes build on x86 (32bit).

Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 82f60a01

drivers/net/ethernet/amd/lance.c

+3 −1
Original line number Diff line number Diff line
@@ -480,6 +480,7 @@ static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int 
	unsigned long flags;

	int err = -ENOMEM;

	void __iomem *bios;

	u8 addr[ETH_ALEN];



	/* First we look for special cases.

	   Check for HP's on-board ethernet by looking for 'HP' in the BIOS.
@@ -541,7 +542,8 @@ static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int 
	/* There is a 16 byte station address PROM at the base address.

	   The first six bytes are the station address. */

	for (i = 0; i < 6; i++)

		dev->dev_addr[i] = inb(ioaddr + i);

		addr[i] = inb(ioaddr + i);

	eth_hw_addr_set(dev, addr);

	printk("%pM", dev->dev_addr);



	dev->base_addr = ioaddr;